StarTech.com | IT Pro's Trusted Source for Connectivity Accessories
4-Port 1GbE SFP PCIe Network Card, NIC - Network Adapter Cards | Networking IO Products | StarTech.comStarTech.com SupportStarTech.com Warranty Policy
User Guide for StarTech Com models including: P041GI-NETWORK-CARD, P041GI 4-Port Open SFP Gigabit Network Card, 4-Port Open SFP Gigabit Network Card, Open SFP Gigabit Network Card, Gigabit Network Card, Network Card
StarTech.com P041GI-NETWORK-CARD
4-Port 1GbE SFP PCIe Network Card, NIC - Network Adapter Cards | Networking IO Products | StarTech.com
StarTech.com Gigabit Ethernet Card P041GI-NETWORK-CARD Tech-America
File Info : application/pdf, 2 Pages, 357.46KB
DocumentDocumentQuick-Start Guide 4-Port Open SFP Gigabit Network Card Product Diagram P041GI-NETWORK-CARD Requirements For the latest requirements, please visit www.startech.com/P041GI-NETWORK-CARD · Host computer with an available PCI Express 2.0 or greater slot (x2, x4, x8, or x16) 1 3 2 4 *Product may vary from image Port/LED/Connector Function 1 Bracket · Secures the card to the Host Computer Case · The Full Profile Bracket comes pre-installed 2 Open SFP Slot x 4 · Add a MSA-Compliant SFP Transceiver Module · Supports Fiber or Ethernet 1 Gbps SFPs 3 LED Indicators · Left LED Indicator is Link Speed · Solid Green: 1 Gbps · Right LED Indicator is Link Status · Solid Green: Active link · Flashing Green: Activity 4 PCIe 2.0 x2 Connector · Insert into a PCI Express Slot on the Host Computer Package Contents · Open SFP Network Card x 1 · Quick-Start Guide x 1 Installation Install the PCI Express Card WARNING! Static Electricity can severely damage PCI Express Cards. Ensure that you are adequately Grounded before you open your Host Computer Case or touch the PCI Express Card. You should wear an Anti-Static Strap or use an Anti-Static Mat when installing any Host Computer component. If an Anti-Static Strap isn't available, discharge any built-up static electricity by touching a large Grounded Metal Surface for several seconds. Only handle the PCI Express Card by its edges and don't touch the gold connectors. 1. Turn off the Host Computer and any Peripheral Devices that are connected to it (e.g. printers, external hard drives, etc.). 2. Unplug the Power Cable from the back of the Host Computer. 3. Disconnect any Peripheral Devices that are connected to the Host Computer. 4. Remove the Cover from the Host Computer Case. Consult the documentation that came with the Host Computer for details about doing this safely. 5. Locate an open PCI Express Slot and remove the corresponding Slot Cover Plate from the back of the Host Computer Case. Note: Consult the documentation that came with the Host Computer for details about doing this safely. This card works in PCI Express x2, x4, x8, or x16 Slots. 6. Gently insert the PCI Express Card into the open PCI Express Slot and fasten the Bracket to the back of the Host Computer Case. 7. Return the Cover onto the Host Computer Case. 8. Insert a compatible 1G SFP Transceiver Module, into the SFP Slot onto the PCI Express Card. 9. Reconnect the Power Cable to the back of the Host Computer. 10. Reconnect all of the Peripheral Devices disconnected in Step 3. 11. Connect a Fiber or Ethernet Network Cable depending on the SFP Transceiver Module used. Connect the other end of the cable to a Network Device. To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support Manual Revision: June 1, 2023 Quick-Start Guide 12. Turn on the Host Computer and Peripheral Devices. Download the Driver 1. Navigate to www.startech.com/P041GI-NETWORK-CARD 2. Click the Drivers & Downloads tab. 3. Under Driver(s), download the Driver Package. Install the Driver Windows 1. Right-click the zipped Driver Package that was downloaded. Click Extract All. Follow the on-screen instructions to extract the files. Note: Windows usually saves the files to the Downloads folder associated with the user account (e.g. C:\Users\useraccount\Downloads 2. Follow the instructions on the accompanying Intel_Windows_DIG file for further Installation Instructions. Verify the Driver Installation Windows 1. Navigate to the Device Manager. 2. Under Network Adapters, right-click Intel(R) I350 Gigabit Fiber Network Connection and click the Properties option. 3. Confirm that the Driver is installed and working as expected. Linux Note: Ensure Linux kernel 2.4 (LTS) or higher is being used. Execute the following command from the terminal prompt to check the kernel version, uname -r. 1. Open a Terminal Window and type the command sudo dmesg | grep Intel to check the Intel Driver Integration. 2. You should see the following response if the drivers are present, Intel(R) Gigabit Network Driver. Linux 1. Extract the contents of the Driver Package. 2. Follow the instructions on the accompanying README file for further Installation Instructions. Regulatory Compliance FCC - Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user's authority to operate the equipment. Industry Canada Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Safety Measures · Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product. Mesures de Sécurité · Lisez tout le manuel et assurez-vous que vous comprenez les instructions avant de commencer à assembler et utiliser ce produit. · Misure di Sicurezza · Leggere l'intero manuale e assicurarsi di aver compreso tutte le istruzioni prima di iniziare ad assemblare e a utilizzare questo prodotto. Säkerhetsåtgärder · Läs hela manualen och se till att du förstår instruktionerna innan du börjar montera och använda produkten. Medidas de Seguridad · Lea todo el manual y asegúrese de haber comprendido bien las instrucciones antes de proceder con el ensamblaje y el uso de este producto. FR FR Cet appareil, À DÉPOSER À DÉPOSER EN MAGASIN EN DÉCHÈTERIE ses accessoires et piles se recyclent OU Warranty Information This product is backed by a two year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you. StarTech.com Ltd. 45 Artisans Crescent London, Ontario N5V 5E9 Canada StarTech.com LLP 4490 South Hamilton Road Groveport, Ohio 43125 U.S.A. StarTech.com Ltd. Unit B, Pinnacle 15 Gowerton Road Brackmills, Northampton NN4 7BW United Kingdom StarTech.com Ltd. Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands FR: startech.com/fr DE: startech.com/de ES: startech.com/es NL: startech.com/nl IT: startech.com/it JP: startech.com/jp