AS11 Self-Cleaning Cat Litter Box

Introduction

This user manual provides comprehensive instructions for the AS11 Self-Cleaning Cat Litter Box. Please read carefully to ensure correct and safe usage.

A QR code is available for a tutorial video: [QR code for tutorial video]

01 User Safety Notes

Recommended Cat Size and Weight

Automatic Mode: The self-cleaning litter box defaults to Automatic Mode.

⚠️ For safe use, your cat must weigh more than 3 pounds (1.36 kg) and be older than 6 months.

Manual Mode

If your cat is under 3 pounds, younger than 6 months, pregnant, or nursing, switch off the automatic cleaning function. To do this, press and hold the “Clean” button for 5 seconds until you hear a beep.

Note: Once the power is unplugged, the default startup mode resets to Automatic. If Manual mode is still needed, please switch it back.

Returning to Automatic Mode: To switch back to Automatic Mode, press and hold the “Clean” button again for 5 seconds until you hear the beep.

Setup and Usage Instructions

Placement: Place the litter box on a flat, stable surface. Avoid soft, uneven, or unstable flooring. This product is for indoor use only—keep it out of direct sunlight and away from open flames. A cool, well-ventilated area is ideal.

Child Supervision: Make sure children use this product only under adult supervision.

Cleaning: Do not use gasoline or other harsh chemicals to clean the machine. Do not get the base unit wet or immerse it in water.

If Not in Use: If you don't plan to use the product for a while, unplug it and empty the litter chamber and waste container.

Installation: Make sure the machine is fully installed and secured before plugging it in.

Keep Away from Hazardous Materials: Do not place flammable, explosive, or volatile items near the machine.

Power Safety: Keep the power plug clean, and never plug in or unplug the machine with wet hands.

Normal Operation: A slight vibration and noise during litter box rotation is normal.

Avoid Strong Magnets: Strong magnets can pose fire risks, damage the machine, or cause electrical issues, so keep them away from the unit.

Handling: Lift and place the product gently; avoid dragging it.

Use Approved Accessories Only: Use only the accessories provided or specified by the company.

02 Components and Accessories

Note: Before you start setting up and using the product, make sure you have all the accessories included.

• Main Unit: The primary self-cleaning litter box structure.
• Waste Container: Collects the waste removed from the litter chamber.
• Support Leg*4: Four legs to support the main unit.
• Power Adapter: To supply power to the device.
• Cat Litter Remover: A tool used during the dumping process. (Please keep! Use when cleaning all litter)
• Liners*1 Roll (20 PCS): Disposable liners for the waste container.
• User Manual: This document.
• Important Tips: Additional guidance.
• Quick Start Guide: A brief guide for initial setup.

03 Product Overview

The AS11 Self-Cleaning Cat Litter Box consists of the following main parts:

• Litter Chamber: Where the cat uses the litter.
• Litter Bed: The surface within the chamber where litter is placed.
• Base Unit: The lower part of the machine housing the motor and waste container.
• Waste Container: Located at the bottom, it stores waste.
• Support Legs: Four legs providing stability.
• Joint Cover Locker: Secures the joint covers.
• Joint Cover - Left / Right: Covers protecting the internal mechanisms.
• Control Buttons: Located on the front panel for operation.

Control Buttons and Indicators

The control panel features:

• Clean Button: Initiates cleaning cycle or switches to manual mode.
• Litter Added Button: Used to level the litter after adding more.
• ON/OFF Button: Powers the device on or off.
• Child Locker Indicator: Shows the status of the child lock feature.

Waste Container Details

• Waste Container Back Latch
• Waste Container Front Latch
• Liner Drawstring Slot and Holder: For securing and closing the waste liner.

04 How to Install

4.1 Installing Support Legs

1. Remove the machine from its packaging and place it on the included PE bag. Insert the four support legs into the circular holes at the machine's bottom, one by one.
2. After all legs are securely in place, stand the machine upright.

⚠️ NOTICE: If the litter chamber isn't level and is tilting forward or backward, do not force it to rotate. Simply plug in the adapter and turn on the machine; it will automatically adjust to the correct position.

4.2 Installing Waste Container

1. Unlock the front and back latches of the waste container.
2. Take the lid off the waste container.
3. Place a liner inside the container box.
4. Take one end of the liner's drawstring, thread it through the slot, and secure it on the holder. (When changing the liner, pull the drawstring to tightly close the liner, avoiding unpleasant odors when opening the waste container).
5. Replace the lid onto the waste container.
6. Lock the front and back latches.
7. Slide the assembled waste container along the machine's bottom track until it locks securely into place.

4.3 Placing the Machine

Place the machine in a roomy indoor area, connect the power adapter to the power port.

Tip: Set up the machine where the previous litter box was, or nearby, ensuring it stays indoors.

When moving the machine, hold the bottom edge of the base unit instead.

❌ Do not lift by gripping the joint covers or by directly dragging the machine.

4.4 Pouring Cat Litter

1. Press the “Power On” button to turn on the machine. The device will automatically align the litter chamber (this process takes about 100 seconds).
2. After alignment, add cat litter to the litter bed. Ensure the level is between the MIN and MAX scale lines. Ideally, fill it to the MAX line, but do not let it drop below the MIN line.

NOTICE: Use clumping cat litter made from mineral or bentonite clay, or other materials with similarly small pieces that can clump.

3. After adding cat litter, press the "Litter Added" button to level the litter.

NOTICE: The device is not suitable for use with long-strip tofu cat litter or crystal cat litter.

05 How to Use

5.1 Introducing Your Cat to the Litter Box

1. For the first three days, fill the litter chamber with the cat litter previously used by your cat. After three days, mix the new cat litter with the old one in equal measure and use this blend for another three days before completely switching to the new litter. This gradual change helps your cat become more familiar with the new litter box.
2. For cats that are more timid, it's recommended to start with the manual button cleaning method for cat waste. Once the cat becomes accustomed to the machine, you can then switch to the automatic cleaning mode.
3. After powering on the device and pressing the ON/OFF button, it will automatically adjust the litter chamber to its default position after five seconds (this process takes no more than 100 seconds). Do not press any buttons during this time. After completion, the device will default to "Automatic Cleaning Mode."

5.2 Button and Indicator Light Status in Different Modes

The following table shows the status of buttons and indicator lights in different modes:

Infrared sensors are located within the unit to detect the cat's presence.

5.3 Buttons and Light Indicators (Function Explanation)

Note:

1. Upon powering on, the machine defaults to "Auto Mode."
2. In cleaning mode, while the litter chamber is rotating: Before disposal, pressing any button will cancel the clearing process, and the litter chamber will smooth and return to its starting position. After disposal, pressing any button will only cause a brief pause, and the litter chamber will continue returning to its starting position.

5.4 Abnormal Indicator Light and Solutions

Note: If these steps don't resolve the issue, please contact customer service.

06 How to Clean and Maintain

6.1 Cleaning and Maintaining the Waste Container

1. Unlock the front latch of the waste container and pull out the liner's drawstring, holding the waste container to prevent shaking.
2. Pull out the waste container.
3. Unlock the latch at the back of the waste container and remove the lid.
4. Clean the Waste Container.

Maintenance Tips:

1. It's recommended to empty the cat waste from the waste container every 5 days for a single-cat household, with a maximum limit of 7 days. This helps prevent the breeding of flies and maggots. Note that actual duration may vary and should be tested for specific situations.
2. It's recommended to clean the waste container every 15 days. If not washed regularly, the waste container can easily retain odors.
3. It's recommended to once a month empty all the cat litter from the litter box, and at the same time clean both the litter box and the waste container. This can help reduce the accumulation of odors in the litter box.

6.2 Dumping Cat Litter

NOTICE:

1. Please empty the liner in the waste container before dumping.
2. Ensure the cat litter is below the minimum line on the litter bed before dumping.

1. When the litter box is in standby, press and hold the “Clean” button for 5 seconds or more to switch it to manual mode.
2. Install the cat litter remover on the litter filter (Insert and press the litter remover ridges into the slots).
3. Press the “Clean” button to start dumping the litter.
4. After the dumping process is complete, remove the cat litter remover. Then, press and hold the cleaning button for 5 seconds to switch the litter box back to automatic mode.

6.3 Cleaning the Litter Chamber

1. Press the locking tabs on the left and right cover plates of the machine to open the joint covers. Then lift out the litter chamber and empty all remaining litter from the chamber.
2. Remove the litter bed from inside the litter chamber.
3. You can rinse the litter chamber and the litter bed with water or use a brush to clean them.
4. After rinsing, be sure to place the litter chamber with the opening facing up in a well-ventilated and dry area to air dry before putting it back into use. Do not air dry with the opening facing down as it impedes drying.

6.4 Cleaning the Base Unit

Please avoid directly cleaning the base unit of the machine with water.

You can use a damp cloth to wipe off dirt and dust on the surface of the machine.

07 Product Specifications

Dimensions:

• Overall Height: 24" / 61cm
• Litter Chamber Width (approx.): 16.33" / 41.5cm
• Base Width (approx.): 21.25" / 54cm
• Litter Chamber Depth (approx.): 15.35" / 39cm
• Base Depth (approx.): 20.27" / 51.5cm
• Entrance Height from Ground: 13.18" / 33.5cm

08 Warranty

1. The warranty period is 12 months from the date of product receipt. The warranty is limited to free repair of the purchased product; consumables and accessories are not covered by the warranty.
2. If the product is damaged or malfunctions during normal use, it can be repaired for free within the warranty period. If repair is not possible, a replacement product service will be provided.
3. Even within the warranty period, the following situations will require a paid repair:
   1. Product failure or damage due to incorrect use or deliberate actions;
   2. Damage caused by the transportation company or other transportation-related damages;
   3. Damage caused by pets (e.g., biting, urinating on the adapter);
   4. Damage or malfunction due to natural disasters such as fire, earthquake, etc.;
   5. Failures and damages beyond the scope of general household use (e.g., using the product outdoors or in scenarios not intended for the product).
4. The following situations will be refused for repair, regardless of the warranty status:
   1. Products not purchased through the company's channels;
   2. Customers disassembling or attempting to modify the original performance of the product;
   3. Consumables and accessories provided with the product.
5. If not within the warranty range, shipping and handling charges will apply for return repairs.
6. The warranty period for replaced products will be based on the warranty period prior to the exchange (calculated from the original purchase date).
7. Repair or replacement services are only valid in certain countries/regions.
8. If you have questions or need repair services, please contact customer service through the purchase channel or email support@petpivot.com.
9. During warranty repairs, "Petpivot" will bear the shipping costs, but the cost of packaging materials is not included.
10. Petpivot reserves the right to interpret the above warranty terms and update the warranty content. All repairs and requests will be processed according to the latest warranty terms.

Notices

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).

WEEE NOTICE

⏳ When this symbol appears on a product, it indicates that the product is subject to the European Directive 2012/19/EU. All old electrical and electronic devices must be separated from normal household waste and disposed of at designated state facilities. The correct disposal of old devices in this manner will prevent environmental pollution and human health hazards. For further information about proper disposal, contact your local authorities, waste disposal office, or the shop where you bought the device.