ASR-L251G||AsReader Product Site specializing in RFID and Barcode AutoID to improve business
User Manual for AsReader models including: ASR-L251G Debuts Quick Lightweight RFID Reader Writer, ASR-L251G, Debuts Quick Lightweight RFID Reader Writer, Lightweight RFID Reader Writer, RFID Reader Writer, Reader Writer, Writer
ASR-L251G||AsReader Product Site specializing in RFID and Barcode AutoID to improve business
File Info : application/pdf, 21 Pages, 3.38MB
DocumentDocumentAsReader GUN-Type ASR-L251G Series Barcode/ RFID Reader User's Manual Copyright © Asterisk Inc. All Rights Reserved. AsReader ® is registered trademarks of Asterisk Inc. The iOS trademark is used under license from Cisco in the United States. Android is a registered trademark of Google LLC. Other company and product names are generally trademarks or registered trademarks of their respective companies. The contents of this manual are subject to change without notice. AsReader ASR-L251G User's Manual Contents Safety Instructions ...................................................................................................... 2 How to Care for the Device .........................................................................................3 1 Assembly of Products and Accessories ................................................................ 4 1.1 Assembly of Products and Accessories ..........................................................................4 1.1.1 Working with iOS Devices ........................................................................................4 1.1.2 Working with Android devices ..................................................................................5 1.2 Inside the Box ..................................................................................................................6 Name of each part of the AsReader .................................................................... 7 Functions and Operations ................................................................................... 8 Before use ......................................................................................................... 11 How to scan .......................................................................................................13 How to charge ................................................................................................... 14 Troubleshooting .................................................................................................16 Appendix-Specifications ........................................................................................... 17 AsReader ASR-L251G User's Manual Preface Thank you for using the Handheld Gun-Type AsReader ASR-L251G series. AsReader GUN-Type ASR-L251G series is a portable device that can scan 1D/2D codes and read/write RF tags. This series of products has several models to choose from (JP, US, EU, etc.), please contact your distributor to choose the model suitable for your country or region. Please refer to the appendix "Product Specifications" for the model information of this series. This Manual describes the considerations for using AsReader GUN Type ASR-L251G. Please read the manual carefully and keep it as long as you have the device. In some sections of this manual, we may refer to " AsReader ASR-L251G " as "the device" or "this device" except for accessories. If you have any comments or questions about this manual, please contact us through the following ways. Asterisk Inc. 532-0011 Shin-Osaka Dainichi Bldg. 201, 5-6-16 Nishinakajima, Yodogawa-ku, Osaka-city, Osaka, JAPAN TEL: +81 (0) 50 5536 8733 In order not to damage your property and life safety, please read this manual carefully before using this device. We will not be responsible for any loss caused by non-compliance with this manual. We are not responsible for any damage caused by natural disasters, such as earthquake, lightning, wind, flood, fire outside our responsibility, third party behavior, other accidents, intentional or negligent, abuse or other improper use. If the damage is caused by falling or collision as determined by our company, the maintenance fee will be charged even within the warranty period. We will take appropriate measures to ensure that our products do not infringe other patents, but we are not responsible for any patent infringement caused by any of the following (1) to (3). (1) Used in combination with components, products, equipment, data processing systems or software outside our company. (2) Our products are used in unexpected ways. (3) Modification of our products by any person or company other than our company 1 AsReader ASR-L251G User's Manual Safety Instructions Please read the following instructions carefully to prevent injury, malfunction, fire, etc. Warning Do not attempt to disassemble, modify or repair the device yourself, otherwise it may cause malfunction, fire or electric shock. We are not responsible for any malfunction of this device or intelligent device caused by modification. The device has passed the radio regulations of Japan and obtained product design certification. According to the radio regulations, modification of this device is prohibited. If you modify yourself, you will be subject to legal sanctions. In addition, the radio regulations are not identical in each country and region, so it is necessary to comply with the regulations of each country. We have models suitable for various countries and regions, please consult your distributor for details. Depending on the intended use and location, it may take some effects of medical equipment. In order to reduce this effect, please strictly adhere to the following points during operation. 1. The operator of this device should keep this device away from more than 22 cm of the site where the implantable medical device is attached. 2. Persons with implantable medical devices should be away from more than 22 cm of this device. If you notice any abnormalities such as smoke, abnormal odor, or strange noise coming from the device during use, stop using it immediately. Continued use may cause fire or electric shock. Do not drop or throw the device and subject it to strong impact. It may cause damage, fire, electric shock, or malfunction. If the device is damaged by dropping and the inside of the device is exposed, do not touch the exposed part with your hands, because there is a risk of electric shock or injury on the damaged part. Do not charge the battery in wet environment, as water will leak from the battery that does not have waterproof performance and the AsLock connection terminal (when AsLock is not connected). Otherwise, it may result in electric shock, short circuit, fire, or burns. Do not splash water on the terminals. Also, do not use this device near water such as in a bathroom, shower room, kitchen, or washroom. It may cause fire or electric shock. Do not use if the USB-C charging terminal is damaged or broken. It may cause fire or electric shock. If charging is not completed within the specified charging time, stop charging. It may cause liquid leakage, heat generation, fire, or failure. Do not use, store, or leave the device in hot places (eg. by the fire, near a heater, in direct sunlight, in a car in hot weather). It may cause rupture, malfunction, fire or injury. Do not throw the device into fire or heat. It may burst or cause a fire. This device is a Class 2 laser product. Do not look into the laser beam or point it at other people. Directly looking into the laser beam may damage your eyes. If you suspect a laser beam injury, seek medical advice immediately. Caution For charging, please use the dedicated USB-C charging cable, the magnetic suction and charging adapter with an output of 5V3A. Using different chargers may result in failed charges. Please refer to local regulations when you recycle this device. If you notice any abnormalities, please discontinue use and contact your distributor immediately. Continuous use of this device in water or in rain may cause damage to the device or attached mobile devices. If it gets wet, please wipe it off immediately. 2 AsReader ASR-L251G User's Manual Interference from external radio waves or surrounding electronic equipment may cause the device to not function properly. Please use the device with caution in this type of environment. The AsLock connection terminal of this device, the magnetice suction of the USB-C charging cable, and the AsLock Gender, all have built-in magnets, which may erase the data on magnetic cards such as credit cards. So, to protect your data, please keep magnetic cards, such as credit cards, away from more than 10 cm of these magnets. How to Care for the Device Please use this device in a clean environment. Adhesive chemicals or oils may cause the resin shell to break. chemicals include cosmetics, detergents, pesticides, thinners, gasoline, etc. oils include tallow and other animal oils, hand creams, etc. Please keep the device clean. If the device becomes dirty, wipe it with a soft, dry cloth. Using solvents of high-volatility may cause color changes and performance problems. 3 AsReader ASR-L251G User's Manual 1 Assembly of Products and Accessories 1.1 Assembly of Products and Accessories In order to use this device with intelligent devices, the following parts are required. 1.1.1 Working with iOS Devices iOS device AsLock (for iOS) Case AsReader GUN 4 AsReader ASR-L251G User's Manual 1.1.2 Working with Android devices Android device AsLock (for Android) Case AsReader GUN Note: If you are using an Android device, we do not guarantee that all models can be used because there are various models. Although most models that support OTG connection can be used, we strongly recommend that you do a verification before purchasing. Please contact the distributor for details such as verification before purchase and the existence of compatible cases. 5 1.2 Inside the Box AsReader ASR-L251G User's Manual The following items are contained in the box. Please first make sure you have all of these items. In case that any items are missing please contact the company from whom you purchased the device. AsReader USB-C cable and the magnetic suction Optional accessories (included in the same package as AsReader if purchased at the same time) AsLock (for iOS) AsLock (for Android) AsLock Gender Case 1.3 Applications Development To use this device, you need to install related applications on mobile devices. You can download SDK from our official website for iOS application development (please refer to SDK development manual and sample code) The official website link (SDK for iOS only): https://asreader.com/products/asr-l251g/ 6 AsReader ASR-L251G User's Manual Please contact your distributor to obtain the Android SDK. Name of each part of the AsReader AsLock terminal Barcode module Antenna Trigger Mode indicator Power button Mode button Power indicator Mode change USB-C charging port Battery 7 AsReader ASR-L251G User's Manual Functions and Operations 1 Power button Power on / off Press and hold the power button for more than 3 seconds, the buzzer will beep with vibration, the power indicator will start to flash, and AsReader will start. The beep sound is turned on by default. If the beep sound setting is turned off, there will be no beep sound. The settings are saved in the application. Vibration is turned on by default. If the vibration setting is turned off, it will not vibrate. The settings are saved in the application. When AsReader is on, press and hold the power button for more than 3 seconds to shut down. If it cannot be turned off, press and hold the power button for more than 10 seconds to reset. If the device is placed without any operation, the device will go to sleep or shut down automatically. The sleep and automatic shutdown times of each OS are as follows. The mobile device is iOS Android not connected Sleep 5 mins 5 mins Not going to sleep When application Auto OFF connected: not turn off When application 10 mins after sleep 10 mins disconnected: 10 mins When the AsReader is in the sleep state, press the Trigger key to return to the operable state. The idle time until sleep and power off can be modified by setting. If set to 0, this function is invalid. When this device is connected to the application and does not perform any operation, the mobile device may go to sleep before this device. In this case, the mobile device will repeatedly connect and disconnect at certain intervals, and there will be Some beeps for connection and disconnection. If the device goes to sleep before the mobile device, the application will display the corresponding prompt message. If the beep sound is set to OFF, the device will not beep. The initial value is ON. The settings will be saved in the application. In addition, this device will automatically restart if it detects a hardware problem. If multiple automatic restarts occur, the device may be faulty, please contact your distributor. 2 Mode button The application could get the events that each mode buttons are pressed. And you can assign various actions such as switching the mode between barcode scan and RFID inventory to the mode buttons through the application. 8 AsReader ASR-L251G User's Manual 3 Trigger Press the trigger to scan 1D, 2D code or RF tags. Of course, you can also scan within the application. 4 LED indicators The LED indicators on the sides of the device indicates the running status of the device. [Power indicator] Running status LED status Waiting for a connection to the Green LED blinking mobile device Connected to mobile device Green LED non-blinking Battery power less than 25% (Not Red LED blinking connected to mobile device) Battery power less than 25% (Connected to mobile device) Charging Red and green LED blinking alternately Red LED non-blinking Be off Be off When the device is 100% charged, the LED turns green. Depending on the state of connection to the mobile device, the LED indicator may blink or keep on. [Mode indicator] The LED can be turned on by any event of the application. 5 Barcode module When the trigger button is pressed, the scanning window will emit a laser beam, aim it at the 1D and 2D barcodes, and then scan it. Beeping occurs during barcode scanning and can be set in the application. Default as being on. Vibration occurs during barcode scanning and can be set in the application. Default as being on. You can set the barcode scanning module, refer to the barcode setting manual. You also can set the Barcode module in the application, and these settings will be permanently saved in the AsReader. Barcode setting manual download link: https://asreader.com/products/asr-l251g/ 6 RFID reading/writing (antenna) Point the antenna towards the RF tags for reading and writing. Beeping occurs during tag reading/writing and can be set in the application. Default as being on. 9 AsReader ASR-L251G User's Manual Vibration occurs during tag reading/writing and can be set in the application. Default as being on. You also can change these settings in the application, and these settings will be permanently saved in the AsReader. 7 USB-C charging interface The device can be charged with the Type-C cable and magnetic suction header with 8mm diameter supplied with the device 8 Battery part You can remove the battery by pressing the buttons on the front and back. 10 AsReader ASR-L251G User's Manual Before use In order to use the device, the components and mobile devices shown in section 1.1 must be assembled and then connected to the device. The assembly method is as follows: 1 Connect the mobile device and AsLock. iOS device Android device 2 Put the above combination into the protective case. (The following steps are common for iOS and Android devices) How to wear the case -1 Remove the rubber part of the case. The plastic part of the case The rubber part of the case Mobile device 11 AsReader ASR-L251G User's Manual -2 Put the mobile device in the rubber part of the case. -3 Install the outer plastic part of the case to the upper -2. Connect the above to the AsReader. To use this device, you need to install a companion app on the mobile device. Please download the apps from AppStore or Google Play. iOS: https://apps.apple.com/app/asr-l251g-app/id1515087301 Android: https://play.google.com/store/apps/details?id=jp.co.asterisk.asreader.l251g 12 AsReader ASR-L251G User's Manual How to scan When ready as described in chapter 4, make sure the battery is fully charged. Next, start the application, boot the device, and then check the connection status between the app and the device. When connected: 1 For barcodes: First, you need to select the barcode mode in the application. And then pull the trigger to illuminate the white illumination and the red laser toward the barcodes to scan the barcodes. (You can also read it by operating the application instead of using the trigger.) The red laser is for aiming. If you aim at the middle point of the barcode, it will be easier to read. 2 For RF tags: First, you need to select the RFID mode in the application. Then point the antenna towards the RF tags and pull the trigger to read /write. (You can also read and write by operating the application instead of using the trigger.) When using our demo app If you are using our demo application "AsReader GUN", please refer to "ASR_L251G_Demo_App_User_Manual_ObjectiveC" for the operation method. URL: https://asreader.com/products/asr-l251g/ 13 AsReader ASR-L251G User's Manual How to charge The charging method for this device is as follows. Plug the included magnetic suction into the Type-C charging interface on the AsReader, and then connect to the Type-C charging cable to charge. We recommend using a 5V/3A charging adapter. Magnetic suction for USB-C charging cable USB-C charging cable USB-C charging interface If a mobile device is connected, both the device battery and the mobile device battery are charged. The power indicator LED is red and remains on while the device is being charged. When the device is 100% charged, the power indicator LED turns green. Depending on the state of connection to the mobile device, the LED indicator may blink or keep on. when AsReader is off, once the type-c charging cable is connected, it will automatically start up and enter the charging state. The power indicator does not show the charging status of the mobile device. Check the display on the mobile device for its charging status. When an Android device is connected, communication with the Android device cannot be performed if the battery of this device is charged, so please disconnect the USB-C charging cable before use. It needs to take 3.5 hours to fully charge the device when the battery runs out. When using the device for the first time or if it has been left unused for a long period of time, please fully charge the battery of this device before use. 14 AsReader ASR-L251G User's Manual Warnings Do not charge the device with a power adapter other than 5V, since this may cause a malfunction and is not covered by the warranty. Supplementary Information Mobile devices (iOS and Android devices) can be charged separately by AsLock Gender. AsLock Gender Mobile device AsLock Gender ASA-018C is recommended. If AsLock Gender ASA-017C is used for charging, as the charging current it can provide is limited, the charging time may be longer than that of ASA-018C. When charging with AsLock Gender ASA-018C, it is best to use the micro USB charging cable that supports quick charging in combination with it. 15 AsReader ASR-L251G User's Manual Troubleshooting If you think the device is broken Please check the following before contacting your distributor. Cannot connect to Mobile device The mobile device may not recognize the device due to problems with the connection or an app. Please check the following: 1 Make sure that the power of this device is turned on. If it is, turn it off and then on again. 2 Please restart the application. 3 Turn the mobile device power off and then on again. Not working If this device become inoperable, press the power button for 10 seconds or longer to reset it. Cannot scan If the device does not scan, please try the following: 1 Please confirm the device's battery is sufficiently charged. 2 If the application is not responding, please try restarting the application. 3 If the RFID is continuously read for a long time, the RFID module may generate heat, which making it impossible to inventory. Please wait a while and then try again. 16 AsReader ASR-L251G User's Manual Appendix-Specifications Model Name ASR-L251G-21 ASR-L251G-22 ASR-L251G-23 ASR-L251G-24 ASR-L251G-26 Bandwidth 916-921MHz 865-868MHz 902-928MHz 920.5-924.5MHz 902-908MHz, 915-928MHz Region Japan Europe North America China Brazil RFID Barcode Battery Spec Output power Reading distance Reading speed Polarization characteristics Function Scanning method Reading distance Reading angle Readable code Light sources Battery capacity Continuous operation time ISO 18000-63 (That is, the previous 18000-6C) / EPC global Class 1 Gen 2 1W (530dBm: adjustable in units of 1dBm) 012m 1 1000 pieces/sec 2 Linearly polarized antenna Read/ Write/ Lock/ Kill CMOS sensor Barcode resolution Distance to the front of the device 100% U.P.C. 46 mm 419 mm CODE 39 - 5 mil 64 mm 163 mm CODE 39 - 10 mil 28 mm 338 mm PDF417 - 6.7 mil 46 mm 185 mm Data Matrix - 10 mil 53 mm 203 mm Pitch: ±45°; Roll: 360°; Skew motion: ±60° 3 1D: UPC/EAN/JAN, GS1 Databar, Code 39, Code 128, Code 32, Code 93, Codabar/NW7, Interleaved 2 of 5, Code 2 of 5, Matrix 2 of 5, MSI, Telepen, Trioptic, China Post 2D Stacked: PDF417, MicroPDF417, GS1 Composite 2D Matrix: Aztec Code, Data Matrix, QR Code, Micro QR Code, MaxiCode, Han Xin Code Postal: Intelligent Mail Barcode, Postal-4i, Australian Post, British Post, Canadian Post, Japanese Post, Netherlands (KIX) Post, Postnet, Planet Code Illumination: white LED, Aiming: red laser (class 2) Built-in rechargeable lithium-ion battery 3400mAh RFID About 11 hours (scan every 5 s; 30 s standby time) About 8 hours (scan every 10 s; 30 s standby time) Barcode About 32 hours or 20,000 times (scan every 5 s) 17 AsReader ASR-L251G User's Manual Power source USB-C cable & Magnetic suction header with 8mm D. 4 Charging time About 3.5 hours (Built-in battery) Key input Trigger, Mode button, Power button Communication Interface USB Dimensions(D)x(W)x(H) 196x64x145mm Weight (with Battery) About 370g Appearance Material PC (Polycarbonate) Case color White, Gray LED Power indicator: red/green Mode indicator: white Operation temperature -1045 Charging temperature 045 Storage temperature -2060 (A month) Environment Operation humidity 2085 % RH Storage humidity 1095 % RH IP rating IP54 compliance (only when connected to AsLock) Anti-drop (Six-sided, 4 edge, once each) 1.5m 5 Certificates TELEC/ FCC 6 /CE/SRRC 6 /ANATEL 6 / RoHS Bundled items USB-C cable & Magnetic suction header with 8mm D 1 It depends on the type of RF tag and operating environment. 2 It depends on the settings and operating environment. 3 It depends on the barcode type. 4 Use a 5V3A output charging adapter for charging. 5 This device only. 6 Scheduled to be acquired (as of March 2020). 18 AsReader ASR-L251G User's Manual AsReader GUN-Type ASR-L251G Series Barcode/ RFID Reader User's Manual 2022.10 V1.2 Asterisk Inc. 532-0011 Shin-Osaka Dainichi Bldg. 201, 5-6-16 Nishinakajima, Yodogawa-ku, Osaka-city, Osaka 19