Owner's Manual for solaredge models including: S650A Power Optimizer, S650A, Power Optimizer, Optimizer

Power Optimizer S650A for Residential Installations

SolarEdge


File Info : application/pdf, 2 Pages, 178.81KB

PDF preview unavailable. Download the PDF instead.

media.nl?id=25673984&c=6376560&h=Mh LLs9oIYjqC olJnrXcrgBvaqYLCkO2eZYhhw zErjC3i1& xt=
POWER OPTIMIZER

Power Optimizer
For Residential Installations
S650A
25
YEAR WARRANTY

Designed for short string residential rooftops

Specifically designed to work with compatible SolarEdge residential inverters

Faster installations with simplified cable management and easy assembly using a single bolt

Small and multifaceted rooftops segment solution: Reduced number of modules per inverter Extended voltage, reducing yield factor losses Improved design flexibility of multifaceted, complex roofs by reducing yield factor losses on the entire system
Superior efficiency (99.5%)
Mitigates diverse types of module mismatch loss, from manufacturing tolerance to partial shading

Flexible system design for maximum space utilization
Compatible with a wide range of modules, including high-powered and bifacial PV modules
Advanced safety:
Patented Sense Connect technology- designed to automatically detect and prevent potential electric arcs at the connector level before an arc is created* Patented SafeDCTM ­ module-level voltage shutdown, for installer and firefighter safety

* Functionality subject to inverter model and firmware version

solaredge.com

Power Optimizer

For Residential Installations
S650A

S650A

INPUT
Rated Input DC Power(1) Absolute Maximum Input Voltage (Voc) MPPT Operating Range Maximum Short Circuit Current (Isc) of Connected PV Module Maximum Efficiency Weighted Efficiency Overvoltage Category

650 80 12.5 ­ 80 15 99.5 98.6 II

OUTPUT DURING OPERATION

Maximum Output Current

15

Maximum Output Voltage

110

OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM INVERTER OR INVERTER OFF)

Safety Output Voltage per Power Optimizer
STANDARD COMPLIANCE(2)

1 ± 0.1

EMC

FCC Part 15 Class B, IEC61000-6-2, IEC61000-6-3, CISPR11, EN-55011

Safety

IEC62109-1 (class II safety), UL1741

Material RoHS Fire Safety

UL94 V-0, UV Resistant Yes
VDE-AR-E 2100-712:2018-12

INSTALLATION SPECIFICATIONS

Maximum Allowed System Voltage

1000

Dimensions (W x L x H)

129 x 165 x 45

Weight Input Connector Input Wire Length Output Connector Output Wire Length Operating Temperature Range(3) Protection Rating Relative Humidity

790 MC4 0.1 MC4 (+) 2.3, (-) 0.10 -40 to +85 IP68 0 ­ 100

(1) The rated power of the module at STC will not exceed the Power Optimizer Rated Input DC Power. Modules with up to +5% power tolerance are allowed.
(2) For details about CE compliance, see Declaration of Conformity ­ CE. (3) Power derating is applied for ambient temperatures above +75°C for S650A.

UNIT
W Vdc Vdc Adc % %
Adc Vdc Vdc
Vdc mm gr m m °C %

PV System Design Using a SolarEdge Inverter(4)
Minimum String Length (Power Optimizers) Maximum String Length (Power Optimizers) Maximum Continuous Power per String Maximum Allowed Connected Power per String
(In multiple string designs, the maximum is permitted only when the difference in connected power between strings is 2,000W or less)
Parallel Strings of Different Lengths or Orientations

SolarEdge Home Wave / Home Hub Inverters ­ Three Phase for 230/400V Grid(5) 10 50 11,250
13,500(6)
Yes

Units
W W

(4) It is not allowed to mix S650A Power Optimizers with any other Power Optimizers on the same inverter.
(5) S650A is only compatible with:
· SolarEdge Home Wave Inverter ­ Three Phase (SExxK-RW0TEBxN4) from firmware version 4.22.XX and above, for inverters produced after WW42/2020. You can find the production date in the serial number on the inverter label (S/N: SJWWYY-xxxxxxxxx-xx).
· SolarEdge Home Hub Inverter ­ Three Phase (SExxK-RWB48BFN4) from firmware version 4.22.XX and above. (6) If the inverter's rated AC power  maximum nominal power per string, then the maximum power per string will be able to reach up to the inverter's maximum input DC power. Refer to the Single String
Design Guidelines application note.

S650A (Bent Bracket)

© SolarEdge Technologies, Ltd. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: January 20, 2025 DS-000237-ENG. Subject to change without notice.



References

Microsoft Word for Microsoft 365