Hama USB Car Charger

Safety Information

Explanation of Warning Symbols and Notes

Risk of electric shock: ⚠️ This symbol indicates product parts energized with a dangerous voltage of sufficient magnitude to constitute a risk of electric shock.

Warning: ❗ This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note: ℹ️ This symbol is used to indicate additional information or important notes.

Package Contents

• USB vehicle charger
• These operating instructions

General Safety Notes

• When using this product, observe the applicable local traffic laws and regulations.
• Take care that components such as airbags, safety areas, controls, instruments, etc. and visibility are not blocked or restricted.
• Do not allow yourself to be distracted by the product when driving a vehicle. Always pay attention to the surrounding traffic and your environment.
• Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications.
• Do not modify the device in any way. Doing so voids the warranty.
• Do not continue to operate the device if it becomes visibly damaged.
• Use the product for its intended purpose only.
• Keep this product, as all electrical products, out of the reach of children!
• Do not bend or crush the cable.
• Always pull directly on the plug when disconnecting the cable, never on the cable itself.
• Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
• Dispose of packaging material immediately according to locally applicable regulations.

Operation

Mains Voltage (12 – 24 V)

Note: ℹ️ Only operate the power supply unit on car electrical networks with a network voltage of 12 – 24 V.

Connecting Terminal Devices

Warning: ⚠️ Before connecting a terminal device, check whether the power output of the charger can supply sufficient power for the device.

Ensure that the power of the connected terminal device does not exceed 10.5 W.

Please refer to the instructions in the operating manual of your terminal device.

Unless the operating instructions for the devices you want to charge explicitly inform you otherwise, proceed as follows:

• Connect your terminal device to a USB charging socket using a suitable USB cable.
• Connect the charger to the car socket of the vehicle electrical system.
• Charging progress is displayed on your terminal device.
• Disconnect the terminal device from the charger if you want to interrupt charging or if the terminal device is fully charged.
• Then disconnect the charger from the power supply.

When charging batteries built into a device, pay attention to the maximum charging time for the batteries.

Note – Car Battery

Note: ℹ️ With some vehicles, it can happen that power continues to be supplied even though the ignition has been switched off. Therefore, when not using the product, disconnect it from the power supply to protect your car battery from discharge.

Care and Maintenance

Only use dry, soft cloths for cleaning.

Note: ℹ️ Disconnect the device from the power supply before cleaning or if it will not be used for a long period of time.

Technical Specifications

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.