SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
ZTE ZXHN F660 V8.0 FTTH
A white ZTE ZXHN F660 V8.0 FTTH device with two white antennas extending upwards. The front panel shows a PON port, four yellow Ethernet LAN ports, a Wi-Fi indicator, a Reset button, a USB port, and a power button. The device is labeled with "ZTE".
Overview
The ZTE F660 V8.0 is a GPON Optical Network Terminal designed for HGU (Home Gateway Unit) used in FTTH scenarios. It supports L3 functions to help subscribers construct intelligent home networks. The ZTE F660 provides a GPON interface to connect OLT with an ODN, offering a new choice for operators to deliver FTTH access.
POL (Passive Optical LAN) is a new type of LAN networking solution based on PON technology. It combines different services such as data, voice, video, and wireless access into one optical fiber network. Inheriting the PON network's advantages of large bandwidth, high reliability, low latency, flatness, easy deployment, and easy management, it is an ideal choice for various scenarios like smart parks, commercial buildings, enterprises, campuses, hotels, governments, and finance.
Product Features
Ultra-wide: one deployment, continuous upgrade of network capacity
Each PON port of the POL network has a bandwidth of up to 10G. When a higher bandwidth requirement arises, the optical fiber does not need to be replaced; only the equipment or optical modules at both ends need replacement, simplifying upgrade steps and saving costs.
Simplified: energy saving and land saving, simple operation and maintenance
The POL solution can reduce the computer room space by approximately 80% and achieve energy savings of up to 60%. The POL network features a simple hierarchy, which is convenient for maintenance and management, reduces failure points, and improves network reliability. Network operation and maintenance expenses can be reduced by more than 60%.
Convergence: One optical fiber carries all services
A set of POL network can provide 1000M Ethernet port, POTS, CATV, Wi-Fi, RS232/485 serial port, PoE port, time synchronization interface, etc. This eliminates the need for multiple networks to carry multiple services.
Security: Provide multiple security protection mechanisms
The POL network effectively avoids electromagnetic interference, electromagnetic leakage, and other problems. It supports AES128 encryption to ensure the safety of data optical fiber transmission. POL equipment supports MAC binding, 802.1x authentication, user isolation, broadcast suppression, and anti-DOS attacks, effectively preventing illegal user access and other attacks.
Functional Characteristics
- Fiber access: Connecting internet through GPON access method.
- Ethernet function: Provides 4 Ethernet ports and Ethernet devices can be directly connected to the ZXHN F660 Ethernet port to achieve Internet and IPTV services.
- VoIP function: Provides 1 VoIP (Phone) port supporting softswitch SIP, IMS SIP, or H.248 voice control protocol. Telephones can be connected via this interface.
- Internal WLAN function: Users can connect to the ZXHNF627 via WLAN, enabling wireless Internet access.
- Data sharing, fast backup, data recovery, and other functions: Provides a USB2.0 port. Plugging in a USB memory device allows for these functions.
- Security, QoS, and network management are considered alongside the above functions.
- Provides multi-level authentication based on device, user, service, and encryption of data channels.
- Can complete local equipment and network matching QoS requirements for different service needs.
- Supports network management based on multiple management methods.
Executive Standard
- GPON interface: SC/UPC or SC/APC PON interface, GPON standard.
- Ethernet interface: 1*10Mbps/100Mbps/1000Mbps adaptive port + 3*10Mbps/100Mbps adaptive port, RJ-45 type, IEEE802.3 and IEEE802.3u standard.
- Phone interface: RJ-11 type.
- WLAN interface: IEEE802.11b, IEEE802.11g, IEEE802.11n standard, built-in antenna.
- USB interface: Standardized USB2.0.
Applications
Caters to different scenarios by providing interfaces such as FE, GE, VoIP, E1, WiFi, USB, and others to meet the requirements of FTTH, FTTO, and FTTB application modes. It serves not only home users but also commercial users, supporting full-service operation with high QoS and security for services like HSI, VoIP, and IPTV.
Easy for deployment: Mounting mode and fiber coiling make installation very easy.
Easy for troubleshooting: Supports ONT signal tracing and performance monitoring, and quickly locates faults on the ONT.
Particular power saving: Supports status monitoring when the ONT is free and enters low-power mode.
Tech Specification
| Parameter | Value |
|---|---|
| Brand | ZTE |
| Model | F660V8.0 |
| Optical port | 1 x GPON interface |
| Transmission Distance | 0-20KM |
| Transmit rate | 2.488Gbps downstream; 1.244Gbps upstream |
| User-Network Interface | 1GE +3FE port 1 x Wi-Fi interface 1 x USB host interface 1 x POTS interfaces |
| Wavelength | Receiving: 1480~1500 nm; Transmitting: 1290~1330 nm |
| Receiving Sensitivity | -28dBm |
| Transmitting Optical Power | 0.5~5dBm |
| Power consumption | <10W |
| Dimensions | 220mm(W) x 44mm(H) x 160mm(D) |
| Working temperature | 0°C ~ 40°C |
| Working humidity | 5% ~ 95% |
| Weight | 380G |
| Power supply | 12V DC |
