DJI Ronin 4D Quick Start Guide

Version 1.0

DJI Ronin 4D Overview

The DJI Ronin 4D is a professional camera gimbal system. Key components are:

Diagram showing the DJI Ronin 4D with numbered parts. 1. Gimbal and Camera: The integrated camera and stabilization unit. 2. Base Plate: Connects the gimbal assembly to other components. 3. Left Hand Grip: Provides control and mounting points. 4. Top Handle: For carrying and manual control. 5. High-Bright Main Monitor: Displays video feed and controls. 6. TB50 Intelligent Battery and Battery Compartment: Powers the device. 7. Main Body: Houses core electronics and connections. 8. Right Hand Grip: Provides control and mounting points.

For more detailed information, refer to the DJI Ronin 4D User Manual.

Getting Started

A. Watching the Tutorials

Scan the QR code to watch tutorials on how to get started with DJI Ronin 4D.

B. Downloading DJI Assistant 2 (Ronin Series)

Visit http://www.dji.com/ronin-4d/downloads to download the DJI Assistant 2 (Ronin Series) for Windows/Mac. This software is required for activating the DJI Ronin 4D.

C. Charging the Battery and Checking the Battery Level

Insert the charging adapter into the battery port and charge the battery with the provided charger. Full charging takes approximately 1.5 hours. The battery level indicators display the battery level during charging or use. Press the battery level button to check the battery level when the battery is not in use.

Diagram showing a battery being charged. It illustrates connecting the battery to a charger, which is plugged into a power outlet (100 - 240 V).

Installation

A. Mounting the Lens (Using DL Lens as an example)

1. The gimbal is folded by default. Unfold the roll and tilt axes before mounting the lens. Toggle the roll axis lock to the unlocked position, adjust the roll axis, and then lock it. Toggle the tilt axis lock to the unlocked position, adjust the tilt axis, and then lock it.

Diagram illustrating the unlocking and locking of the gimbal's roll and tilt axes. It shows steps for adjusting and securing each axis.

2. Press and hold the release button and rotate the DL mount body cap counter-clockwise to remove it.

Diagram showing the removal of the lens mount body cap by pressing a button and rotating counter-clockwise.

3. Align the red marks on the lens and the DL mount. Insert and rotate the lens clockwise until there is a clicking sound.

Diagram illustrating the alignment of red marks on the lens and mount, followed by insertion and clockwise rotation until a click is heard.

B. Balancing

1. Balancing the Tilt Axis

a. Toggle the tilt axis lock to the unlocked position ➀ and loosen the knobs on both sides of the tilt axis ➁.

b. Check that the camera is not front or back-heavy. If front-heavy, move the camera backward. If back-heavy, move the camera forward.

c. The tilt axis is balanced if the camera remains steady when tilted forward. Tighten the knobs ➂.

d. Lock the tilt axis ➃.

Diagrams showing the steps for balancing the tilt axis. This includes unlocking, loosening knobs, adjusting camera position for balance, tightening knobs, and finally locking the axis.

2. Balancing the Pan Axis

a. Toggle the pan axis lock to the unlocked position ➀ and loosen the knobs on the pan motor ➁.

b. Tilt the Ronin 4D towards you while holding the top handle. Observe the pan axis movement. If the camera lens rotates to the left, push the pan axis to the right. If the camera lens rotates to the right, push the pan axis to the left.

c. The pan axis is balanced if the camera remains steady when rotated by tilting the top handle. Tighten the knob ➂.

Diagrams illustrating the process of balancing the pan axis. This involves unlocking, loosening motor knobs, tilting the handle to check movement, and adjusting the axis position until steady.

C. Attaching the Hand Grips

Ensure the lever is in the unlocked position. Insert the left hand grip into the mounting port on the main body ➀ until it clicks, then push the lever all the way down ➁. Attach the right hand grip in the same manner.

Diagram showing the attachment of a hand grip. It depicts inserting the grip into the port until a click, then securing it by pushing down a lever.

D. Attaching the Intelligent Battery

Align the Intelligent Battery with the battery compartment and push the battery down until there is a clicking sound.

Diagram illustrating the insertion of the intelligent battery into its compartment until a click is heard.

E. Inserting the Storage Card

Open the card compartment cover and insert a CFexpress 2.0 Type B card or mount a DJI PROSSD 1TB card.

* The CFexpress 2.0 Type B card is not included and must be purchased separately. Refer to the DJI PROSSD Mount User Guide and DJI PROSSD 1TB User Guide for more information.

Diagram showing the storage card compartment and the insertion of a CFexpress card.

Activating DJI Ronin 4D

The DJI Ronin 4D requires activation through DJI Assistant 2 (Ronin Series) before first use. Follow these steps:

Before powering on, ensure GIMBAL MODE is set to FOLLOW or LOCK, the LOCK switch is unlocked, and all three gimbal axes are unlocked. Otherwise, the Ronin 4D may not function correctly. Press and hold the power button for 1 second to power on.
Connect the Ronin 4D's USB-C port to a computer using the provided USB-A to USB-C cable. Launch DJI Assistant 2 (Ronin Series), select Ronin 4D, and follow the on-screen instructions to activate.

Diagram showing the Ronin 4D with a USB-C port highlighted. It also displays gimbal mode options: LOCK, FOLLOW (PT/PF), FPV, and OFF (Sleep mode).

Auto Tune

Perform an Auto Tune on the Ronin 4D before use to ensure optimal performance. On the high-bright main monitor, tap HOME, then select Stabilizer, Gimbal Calibration, and Auto Tune.

Diagram highlighting the HOME button on the Ronin 4D.

Ensure the DJI Ronin 4D is placed on a flat, steady surface before auto-tuning. Gimbal vibration and sounds during this process are normal. Auto Tune must be performed every time the camera lens is changed.

Operation

The Ronin 4D can be used after activation, auto-tuning, and Z-axis balancing.

Balancing the Z Axis

Power on the Ronin 4D and enable the Z axis before balancing.

Loosen the Z axis lock ➀ and press the Z Axis switch ➁ to enable the Z axis.
Follow the prompts on the high-bright main monitor to balance the Z axis by turning the adjustment knob ➂. The Z axis is balanced when it remains horizontal.

Diagram illustrating the Z-axis balancing process, showing the Z-axis lock, switch, and adjustment knob.

Main Body Controls

Diagram of the main body of the DJI Ronin 4D with numbered controls and ports: 1. Power Button: Press and hold for 1 second to power on; press and hold for 3 seconds to power off. 2. Lock Button: Toggle left to disable Ronin 4D. 3. Record Button: Press once to start or stop recording. 4. Z Axis Switch: Press once to enable or disable the Z axis. 5. Battery Release Button: Press once and then remove the battery. 6. Dial: Turn to adjust focus. 7. Gimbal Mode: OFF (Sleep), FOLLOW (PF/PT/FPV), LOCK. 8. USB-C Port: Connect external storage or computer for activation/firmware updates. 9. Storage Card Compartment: For CFexpress 2.0 Type B or DJI PROSSD 1TB cards. 10. C1, C2 Buttons: C1 recenters gimbal; C2 switches Z-axis follow/lock mode. 11. Display Port: Connects to the high-bright main monitor. 12. Audio Port: 3.5mm microphone and headphone ports. 13. HDMI Port: For HDMI output. 14. DC-IN Port: Input voltage 12-30 V.

Left Hand Grip Controls

Diagram of the Left Hand Grip with numbered controls: 1. Joystick: Pan left/right, tilt up/down. 2. Joystick Lock: Disables joystick operation when locked. 3. Exposure Assist Button: Enable/disable exposure display. 4. ActiveTrack Button: Press and hold for 1 sec to enter/exit ActiveTrack; press to confirm subject. 5. M Button: Press and hold to enter Sport mode; release to exit. 6. Hand Grip Angle Adjustment Lever: Press and hold to adjust angle; grip locks when lever is released. Do not adjust both grips simultaneously. 7. Hand Grip Lock Lever: Locks the hand grip in place. 8. Safety Lock: Release before detaching the hand grip. 9. Trigger: Double-press to center subject (after ActiveTrack); double-press to recenter gimbal (when not in ActiveTrack). Press and hold to start ActiveTrack (in Smart mode with subject); press and hold to switch between Follow/Lock mode (not in Smart mode).

Right Hand Grip Controls

Diagram of the Right Hand Grip with numbered controls: 1. Dial: Adjust focus/aperture, scroll through monitor options. 2. Record Button: Press once to start/stop recording. 3. Focus Peak Button: Enable/disable focus peak display. 4. Safety Lock: Release before detaching the hand grip. 5. Hand Grip Lock Lever: Locks the hand grip in place. 6. Hand Grip Angle Adjustment Lever: Press and hold to adjust angle; grip locks when lever is released. Do not adjust both grips simultaneously. 7. Focus Button: Switch between manual and auto focus. 8. Mode Button: Switch the function of the dial. 9. Trigger: Double-press to enable/disable Z axis; press and hold to enter lock mode (when Z axis is enabled).

Top Handle Controls

Diagram of the Top Handle with numbered features: 1. Top Screw Hole: 3/8"-16 with a depth of 10 mm. 2. M Button: Press and hold to enter Sport mode; release to exit. 3. Tilt Slider: Controls gimbal tilt. 4. Side Screw Hole: 1/4"-20 with a depth of 9 mm.

High-Bright Main Monitor Controls

Diagram of the High-Bright Main Monitor with numbered controls: 1. Parameter Buttons: Press to open parameters; press again to confirm. Press and hold for advanced settings. 2. Playback Button: Press once to enter/exit playback; press and hold for full screen. 3. Dial: Turn to scroll options; press to confirm. 4. Home Button: Enter/exit menu. 5. Focus Peak Button: Enable/disable focus assist. 6. LUT Button: Enable/disable LUT display. 7. EXP Button: Enable/disable exposure display.

Support and Information

We Are Here For You

For technical support, contact DJI SUPPORT via Facebook Messenger.

Scan the WeChat QR code for technical support. [微信扫一扫获取技术支持]

Subscribe For More Info

Follow DJI 大疆创新 for the latest news and information.

[Facebook] [Twitter] [YouTube] [WeChat] [TikTok] [Zhihu]

Visit https://pro.dji.com

	DJI LiDAR Range Finder User Manual User manual for the DJI LiDAR Range Finder, detailing its specifications, installation, connection, and usage with the DJI Ronin 4D gimbal camera for enhanced autofocus capabilities. Learn more at dji.com.
	DJI RS 2 User Manual: Gimbal Operation, Setup, and Specifications Comprehensive user manual for the DJI RS 2 gimbal, covering setup, balancing, operation modes, app features, safety guidelines, and technical specifications. Learn how to use your DJI RS 2 for professional camera stabilization.
	DJI RS 2 Quick Start Guide: Get Started with Your Gimbal Stabilizer This quick start guide provides essential information for setting up and using the DJI RS 2 gimbal stabilizer. Learn about overview, getting started, mounting cameras, balancing, and operation.
	DJI RS 2 Quick Start Guide A comprehensive guide to setting up and operating the DJI RS 2 gimbal stabilizer, covering overview, getting started, camera mounting, balancing procedures, operational features, specifications, and compliance information.
	DJI Ronin 4D Safety Guidelines This document provides essential safety guidelines for the DJI Ronin 4D, covering warnings, cautions, and important notices to ensure safe operation and prevent damage or injury. It includes specifications and compliance information.
	DJI RSC 2 User Manual Comprehensive user manual for the DJI RSC 2, a professional 3-axis gimbal designed for DSLR and mirrorless cameras. Covers setup, balancing, operation modes, app features, safety guidelines, and specifications.
	DJI Ronin-S Tethered Control Handle User Guide Comprehensive user guide for the DJI Ronin-S Tethered Control Handle, detailing its features, installation, operation, and compliance information. Learn how to remotely control gimbal movement and camera functions.
	DJI RS 3 User Manual: Setup, Operation, and Features Comprehensive user manual for the DJI RS 3, a professional 3-axis gimbal stabilizer. Learn about setup, activation, camera mounting, operation modes, and maintenance for mirrorless cameras.