Austrian Audio Hi-X50, Hi-X55, Hi-X65 Quick Start Guide
Austrian Audio
Important Safety Information
[warning symbol: age restriction 0-3]
[warning symbol: improper handling] Use these headphones only for their intended applications. Austrian Audio cannot accept liability for damages resulting from improper handling or misuse.
[warning symbol: hearing damage] Listening to personal stereo equipment at full volume for long periods can damage the user's hearing.
[warning symbol: electrical safety] Complies with IEC 62368-1:2018 for mobile audio equipment.
[icon: avoid moisture]
[icon: keep away from fire]
[icon: do not use tools]
When the product reaches the end of its life, separate the housing, electronics and cables and dispose of all components in accordance with local waste disposal regulations!
Compliance Information
Declaration of conformity at https://austrian.audio
China Legal Information (RoHS)
| 部件名称 (Part Name) | 铅 (Pb) | 汞 (Hg) | 镉 (Cd) | 六价铬 (Cr(VI)) | 多溴联苯 (PBB) | 多溴二苯醚 (PBDE) |
|---|---|---|---|---|---|---|
| 头戴式耳机 (Headband/Earcup) | X | O | O | O | O | O |
| 电缆 (Cable) | X | O | O | O | O | O |
○: Indicates that the content of this hazardous substance in all homogeneous materials of this part is below the limit requirement specified in GB/T 26572.
X: Indicates that the content of this hazardous substance in at least one homogeneous material of this part exceeds the limit requirement specified in GB/T 26572.
This table is prepared in accordance with the provisions of SJ/T 11364.
Contact Us
Feel free to contact us:
Email: support@austrianaudio.com
Website: www.austrian.audio
Austrian Audio GmbH, Eitnergasse 15, 1230 Vienna, Austria
Printed in Austria. Document ID: 18003R00070_C_12/21
Instructions
Cable Tie Creation
Follow these steps to create a cable tie:
- [icon: scissors] Cut the ribbon to the desired length.
- Fold the ribbon in half.
- Wrap the folded ribbon around the cable.
- Secure the loop to create a tie.
Cable Locking
Secure your cable using the locking mechanism:
1. Insert the cable into the designated slot on the locking mechanism.
2. Ensure the cable is firmly secured by the lock.
Ear Cushion Replacement
For Hi-X55 / Hi-X65 Models
1. Gently pull the existing ear cushion away from the earcup until it detaches.
2. Align the new ear cushion with the earcup and press firmly around the edge until it clicks into place (approximately 12 clicks).
For Hi-X50 Model
1. Gently pull the existing ear cushion away from the earcup until it detaches.
2. Align the new ear cushion with the earcup and press firmly around the edge until it clicks into place (approximately 8 clicks).
Austrian Audio - Austrian Audio
