Systemair RVK 100E2 SILEO 1PH/230V

Description

• Speed-controllable
• Integral thermal contacts
• Can be installed in any position
• Inclusive mounting bracket
• Maintenance-free and reliable

The RVK series is designed for installation in ducts. The casing is manufactured from PA6 fibreglass reinforced plastic, providing a casing with minimal leakage. Duct-connected wet room applications are possible due to the airtight casing and the IP 44 rated terminal box. The fans feature backward-curved blades and external rotor motors. The FK mounting clamp facilitates easy installation and removal, and prevents the transfer of vibration to the duct. The fans can be speed-controlled via a stepless thyristor or a 5-step transformer. The RVK fans have integral thermal contacts with automatic reset.

Dimensions

Technical drawing showing the fan unit with dimensions labeled ØA, ØB, ØC, D, E, F, G, H, I, J. An arrow indicates the airflow direction.

Wiring

Electrical connection diagram for 230V 1~ power supply. The diagram shows terminals labeled 'N' (Neutral) and 'L' (Line), with two black wires connecting to the fan's internal components.

Accessories

Electric Accessories

• RE 1,5 Speed control (5000)
• REU 1.5 Speed control (5004)
• REE 1 Speed control (5314)
• STL 1.5 Speed controller (84251)
• REV-3POL/03 ON/OFF (33978)
• FRQS-E-6A (37419)
• FRQ5S-E-6A (37421)

Other Accessories

• CB 100-0,4 230V/1 Duct heater (5288)
• CB 100-0,6 230V/1 Duct heater (5376)
• CBM 100-0,6 230V/1 Duct heater (5479)
• VBF 100 Water heating battery (1724)
• CWK 100-3-2,5 Duct cooler, circ (30019)
• VBC 100-2 Water heating batt (5456)
• LDC 100-600 Silencer (5188)
• LDC 100-900 Silencer (5189)
• FFR 100 Filter cassette (1766)
• FGR 100 Filter cassette (1802)
• FK 100 Fast clamp (1607)
• VKK-100 Back draft damper (1623)
• IGK-100 Wall Grid (1630)
• RSK-100 Back draft damper (5597)
• SG 100 Protection guard (5606)
• LDC 100-1200 Silencer (5996)
• VBC 100-3 Water heating batt (9838)