User Guide for behringer models including: 173 Quad Gate, Multiples Legendary Analog Quad Gate and Multiples Module for Eurorack
20 hours ago — Download your favorite TC Helicon app to begin experimenting with vocal effects. Left. Right. Ground. Mic. Quick Start Guide. (EN) Getting started.
g4m
File Info : application/pdf, 9 Pages, 735.34KB
DocumentDocumentQuick Start Guide 173 QUAD GATE/MULTIPLES Legendary Analog Quad Gate & Multiples Module for Eurorack V 1.0 2 173 QUAD GATE/MULTIPLES LEGAL DISCLAIMER Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved. LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at community.musictribe.com/pages/ support#warranty. DÉNI LÉGAL Music Tribe ne peut être tenu pour responsable pour toute perte pouvant être subie par toute personne se fiant en partie ou en totalité à toute description, photographie ou affirmation contenue dans ce document. Les caractéristiques, l'apparence et d'autres informations peuvent faire l'objet de modifications sans notification. Toutes les marques appartiennent à leurs propriétaires respectifs. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones et Coolaudio sont des marques ou marques déposées de Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 Tous droits réservés. GARANTIE LIMITÉE Pour connaître les termes et conditions de garantie applicables, ainsi que les informations supplémentaires et détaillées sur la Garantie Limitée de Music Tribe, consultez le site Internet community. musictribe.com/pages/support#warranty. LEGAL RENUNCIANTE O Music Tribe não se responsabiliza por perda alguma que possa ser sofrida por qualquer pessoa que dependa, seja de maneira completa ou parcial, de qualquer descrição, fotografia, ou declaração aqui contidas. Dados técnicos, aparências e outras informações estão sujeitas a modificações sem aviso prévio. Todas as marcas são propriedade de seus respectivos donos. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones e Coolaudio são marcas ou marcas registradas do Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 Todos direitos reservados. GARANTIA LIMITADA Para obter os termos de garantia aplicáveis e condições e informações adicionais a respeito da garantia limitada do Music Tribe, favor verificar detalhes na íntegra através do website community.musictribe.com/ pages/support#warranty. NEGACIÓN LEGAL Music Tribe no admite ningún tipo de responsabilidad por cualquier daño o pérdida que pudiera sufrir cualquier persona por confiar total o parcialmente en la descripciones, fotografías o afirmaciones contenidas en este documento. Las especificaciones técnicas, imágenes y otras informaciones contenidas en este documento están sujetas a modificaciones sin previo aviso. Todas las marcas comerciales que aparecen aquí son propiedad de sus respectivos dueños. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones y Coolaudio son marcas comerciales o marcas registradas de Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 Reservados todos los derechos. GARANTÍA LIMITADA Si quiere conocer los detalles y condiciones aplicables de la garantía así como información adicional sobre la Garantía limitada de Music Tribe, consulte online toda la información en la web community. musictribe.com/pages/support#warranty. HAFTUNGSAUSSCHLUSS Music Tribe übernimmt keine Haftung für Verluste, die Personen entstanden sind, die sich ganz oder teilweise auf hier enthaltene Beschreibungen, Fotos oder Aussagen verlassen haben. Technische Daten, Erscheinungsbild und andere Informationen können ohne vorherige Ankündigung geändert werden. Alle Warenzeichen sind Eigentum der jeweiligen Inhaber. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones und Coolaudio sind Warenzeichen oder eingetragene Warenzeichen der Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 Alle Rechte vorbehalten. BESCHRÄNKTE GARANTIE Die geltenden Garantiebedingungen und zusätzliche Informationen bezüglich der von Music Tribe gewährten beschränkten Garantie finden Sie online unter community. musictribe.com/pages/support#warranty. DISCLAIMER LEGALE Music Tribe non si assume alcuna responsabilità per eventuali danni che possono essere subiti da chiunque si affidi in tutto o in parte a qualsiasi descrizione, fotografia o dichiarazione contenuta qui. Specifiche tecniche, aspetti e altre informazioni sono soggette a modifiche senza preavviso. Tutti i marchi sono di proprietà dei rispettivi titolari. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones e Coolaudio sono marchi o marchi registrati di Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 Tutti i diritti riservati . GARANZIA LIMITATA Per i termini e le condizioni di garanzia applicabili e le informazioni aggiuntive relative alla garanzia limitata di Music Tribe, consultare online i dettagli completi su community.musictribe.com/pages/ support#warranty. WETTELIJKE ONTKENNING Music Tribe aanvaardt geen aansprakelijkheid voor enig verlies dat kan worden geleden door een persoon die geheel of gedeeltelijk vertrouwt op enige beschrijving, foto of verklaring hierin. Technische specificaties, verschijningen en andere informatie kunnen zonder voorafgaande kennisgeving worden gewijzigd. Alle handelsmerken zijn eigendom van hun respectievelijke eigenaren. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones en Coolaudio zijn handelsmerken of gedeponeerde handelsmerken van Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 Alle rechten voorbehouden. ZASTRZEENIA PRAWNE Music Tribe nie ponosi odpowiedzialnoci za jakiekolwiek straty, które mog ponie osoby, które polegaj w caloci lub w czci na jakimkolwiek opisie, fotografii lub owiadczeniu zawartym w niniejszym dokumencie. Specyfikacje techniczne, wygld i inne informacje mog ulec zmianie bez powiadomienia. Wszystkie znaki towarowe s wlasnoci ich odpowiednich wlacicieli. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones i Coolaudio s znakami towarowymi lub zastrzeonymi znakami towarowymi firmy Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 Wszystkie prawa zastrzeone. BEPERKTE GARANTIE Voor de toepasselijke garantievoorwaarden en aanvullende informatie met betrekking tot de beperkte garantie van Music Tribe, zie de volledige details online op community. musictribe.com/pages/support#warranty. OGRANICZONA GWARANCJA Aby zapozna si z obowizujcymi warunkami gwarancji i dodatkowymi informacjami dotyczcymi ograniczonej gwarancji Music Tribe, zapoznaj si ze wszystkimi szczególami w trybie online pod adresem community.musictribe.com/ pages/support#warranty. FRISKRIVNINGSKLAUSUL Music Tribe tar inget ansvar för någon förlust som kan drabbas av någon person som helt eller delvis förlitar sig på någon beskrivning, fotografi eller uttalande som finns här. Tekniska specifikationer, utseenden och annan information kan ändras utan föregående meddelande. Alla varumärken tillhör respektive ägare. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones och Coolaudio är varumärken eller registrerade varumärken som tillhör Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 Alla Rättigheter reserverade. BEGRÄNSAD GARANTI För tillämpliga garantivillkor och ytterligare information om Music Tribes begränsade garanti, se fullständig information online på community.musictribe.com/pages/ support#warranty. Quick Start Guide 3 4 173 QUAD GATE/MULTIPLES 173 QUAD GATE/MULTIPLES Controls (1) (2) (3) (4) (EN) Controls Quick Start Guide 5 (1) GATE OUT Send the gate signal to another module via 3.5 mm TS cable. (2) GATE IN Connect an incoming signal via 3.5 mm TS cable. (3) GATE CV Connect a control voltage signal from other modules to control gate operation, non-inverting (active high) and inverting (active low) inputs. (4) MULTIPLES Connect a signal to the A jack that will be sent to multiple designations via the B, C and D jacks in the same row. (ES) Controles (1) PUERTA DE SALIDA Envíe la señal de la puerta a otro módulo mediante un cable TS de 3,5 mm. (2) PUERTA EN Conecte una señal entrante mediante un cable TS de 3,5 mm. (3) CV GATE Conecte una señal de voltaje de control de otros módulos para controlar el funcionamiento de la puerta, entradas no inversoras (activa alta) e inversora (activa baja). (4) MÚLTIPLOS Conecte una señal a la toma A que se enviará a varias designaciones a través de las tomas B, C y D de la misma fila. (FR) Réglages (1) PORTE DE SORTIE Envoyer le signal de porte à un autre module via un câble TS 3,5 mm. (2) PORTAIL DANS Connectez un signal entrant via un câble TS de 3,5 mm. (3) CV GATE Connectez un signal de tension de commande d'autres modules pour contrôler le fonctionnement de la porte, entrées non inverseuses (actif haut) et inverseur (actif bas). (4) MULTIPLES Connectez un signal à la prise A qui sera envoyé à plusieurs désignations via les prises B, C et D de la même rangée. 6 173 QUAD GATE/MULTIPLES (DE) Bedienelemente (1) GATE OUT Senden Sie das Gate-Signal über ein 3,5-mm-TS-Kabel an ein anderes Modul. (2) GATE IN Schließen Sie ein eingehendes Signal über ein 3,5 mm TS-Kabel an. (3) GATE Lebenslauf Schließen Sie ein Steuerspannungssignal von anderen Modulen an, um den Gate-Betrieb, die nicht invertierenden (aktiv hoch) und die invertierenden (aktiv niedrig) Eingänge zu steuern. (4) MEHRFACH Schließen Sie ein Signal an die A-Buchse an, das über die B-, C- und D-Buchsen in derselben Reihe an mehrere Bezeichnungen gesendet wird. (NL) Bediening Quick Start Guide 7 (1) POORT UIT Stuur het poortsignaal naar een andere module via 3,5 mm TS-kabel. (2) POORT BINNEN Sluit een inkomend signaal aan via een 3,5 mm TS-kabel. (3) GATE CV Sluit een stuurspanningssignaal van andere modules aan om de poortwerking, niet-inverterende (actief hoog) en inverterende (actief laag) ingangen te besturen. (4) VEELVOUDIGEN Sluit een signaal aan op de A-aansluiting dat naar meerdere aanduidingen wordt gestuurd via de B-, C- en D-aansluitingen in dezelfde rij. (PT) Controles (IT) Controlli (1) GATE OUT Envie o sinal do portão para outro módulo via cabo TS de 3,5 mm. (2) PORTÃO Conecte um sinal de entrada via cabo TS de 3,5 mm. (3) GATE CV Conecte um sinal de tensão de controle de outros módulos para controlar a operação da porta, entradas não inversoras (alto ativo) e inversor (baixo ativo). (4) MÚLTIPLOS Conecte um sinal ao conector A que será enviado para várias designações por meio dos conectores B, C e D na mesma linha. (1) GATE OUT Inviare il segnale del cancello a un altro modulo tramite cavo TS da 3,5 mm. (2) GATE IN Collegare un segnale in ingresso tramite cavo TS da 3,5 mm. (3) GATE CV Collegare un segnale di tensione di controllo da altri moduli per controllare il funzionamento del gate, ingressi non invertenti (attivo alto) e invertenti (attivo basso). (4) MULTIPLI Collegare un segnale al jack A che verrà inviato a più designazioni tramite i jack B, C e D nella stessa riga. (SE) Kontroller (PL) Sterownica (1) GRINDEN UT Skicka grindsignalen till en annan modul via 3,5 mm TS-kabel. (2) GATE IN Anslut en inkommande signal via 3,5 mm TS-kabel. (3) GATE CV Anslut en styrspänningssignal från andra moduler till ingångarna för styrgrind, icke-inverterande (aktiv hög) och inverterande (aktiv låg). (4) FLERA Anslut en signal till A-uttaget som kommer att skickas till flera beteckningar via B-, C- och D-uttagen i samma rad. (1) BRAMA WYJCIOWA Wylij sygnal bramki do innego modulu kablem TS 3,5 mm. (2) GATE IN Podlcz przychodzcy sygnal kablem TS 3,5 mm. (3) GATE CV Podlcz sygnal napicia sterujcego z innych modulów, aby sterowa prac bramki, wejciami nieodwracajcymi (aktywny stan wysoki) i odwracajcymi (aktywny niski). (4) WIELE Podlcz sygnal do gniazda A, który zostanie wyslany do wielu oznacze przez gniazda B, C i D w tym samym rzdzie. 8 173 QUAD GATE/MULTIPLES (EN) Power Connection (ES) Conexión eléctrica The module comes with the required power cable for connecting to a standard Eurorack power supply system. Follow these steps to connect power to the module. It is easier to make these connections before the module has been mounted into a rack case. 1. Turn the power supply or rack case power off and disconnect the power cable. 2. Insert the 16-pin connector on the power cable into the socket on the power supply or rack case. The connector has a tab that will align with the gap in the socket, so it cannot be inserted incorrectly. If the power supply does not have a keyed socket, be sure to orient pin 1 (-12 V) with the red stripe on the cable. 3. Insert the 10-pin connector into the socket on the back of the module. The connector has a tab that will align with the socket for correct orientation. 4. After both ends of the power cable have been securely attached, you may mount the module in a case and turn on the power supply. Installation El módulo viene con el cable de alimentación necesario para conectarse a un sistema de suministro de energía Eurorack estándar. Siga estos pasos para conectar la alimentación al módulo. Es más fácil realizar estas conexiones antes de que el módulo se haya montado en una caja de rack. 1. Apague la fuente de alimentación o la caja del bastidor y desconecte el cable de alimentación. 2. Inserte el conector de 16 clavijas del cable de alimentación en la toma de la fuente de alimentación o en la caja del bastidor. El conector tiene una pestaña que se alineará con el espacio en el zócalo, por lo que no se puede insertar incorrectamente. Si la fuente de alimentación no tiene un enchufe con llave, asegúrese de orientar el pin 1 (-12 V) con la raya roja en el cable. 3. Inserte el conector de 10 pines en el zócalo en la parte posterior del módulo. El conector tiene una pestaña que se alineará con el enchufe para una orientación correcta. 4. Una vez que ambos extremos del cable de alimentación se hayan conectado de forma segura, puede montar el módulo en una caja y encender la fuente de alimentación. The necessary screws are included with the module for mounting in a Eurorack case. Connect the power cable before mounting. Depending on the rack case, there may be a series of fixed holes spaced 2 HP apart along the length of the case, or a track that allows individual threaded plates to slide along the length of the case. The free-moving threaded plates allow precise positioning of the module, but each plate should be positioned in the approximate relation to the mounting holes in your module before attaching the screws. Hold the module against the Eurorack rails so that each of the mounting holes are aligned with a threaded rail or threaded plate. Attach the screws part way to start, which will allow small adjustments to the positioning while you get them all aligned. After the final position has been established, tighten the screws down. Instalación Los tornillos necesarios se incluyen con el módulo para el montaje en una caja Eurorack. Conecte el cable de alimentación antes del montaje. Dependiendo de la caja del bastidor, puede haber una serie de orificios fijos separados 2 HP a lo largo de la caja, o una pista que permita que las placas roscadas individuales se deslicen a lo largo de la caja. Las placas roscadas de movimiento libre permiten un posicionamiento preciso del módulo, pero cada placa debe colocarse en una relación aproximada con los orificios de montaje en su módulo antes de colocar los tornillos. Sostenga el módulo contra los rieles Eurorack de modo que cada uno de los orificios de montaje esté alineado con un riel o placa roscada. Coloque los tornillos parcialmente para comenzar, lo que permitirá pequeños ajustes en la posición mientras los alinea todos. Una vez establecida la posición final, apriete los tornillos. Quick Start Guide 9 (FR) Connexion électrique (DE) Netzanschluss Le module est livré avec le câble d'alimentation requis pour la connexion à un système d'alimentation standard Eurorack. Suivez ces étapes pour connecter l'alimentation au module. Il est plus facile d'effectuer ces connexions avant que le module n'ait été monté dans un boîtier de rack. 1. Mettez le bloc d'alimentation ou le boîtier de rack hors tension et débranchez le câble d'alimentation. 2. Insérez le connecteur à 16 broches du câble d'alimentation dans la prise du bloc d'alimentation ou du boîtier du rack. Le connecteur a une languette qui s'alignera avec l'espace dans la prise, de sorte qu'il ne peut pas être inséré de manière incorrecte. Si le bloc d'alimentation n'a pas de prise à clé, veillez à orienter la broche 1 (-12 V) avec la bande rouge sur le câble. 3. Insérez le connecteur à 10 broches dans la prise à l'arrière du module. Le connecteur a une languette qui s'alignera avec la prise pour une orientation correcte. 4. Une fois que les deux extrémités du câble d'alimentation ont été solidement fixées, vous pouvez monter le module dans un boîtier et allumer l'alimentation. Installation Les vis nécessaires sont incluses avec le module pour le montage dans un boîtier Eurorack. Connectez le câble d'alimentation avant le montage. Selon le cas de rack, il peut y avoir une série de trous fixes espacés de 2 HP sur la longueur du cas, ou une piste qui permet aux plaques filetées individuelles de glisser le long de la longueur du cas. Les plaques filetées à déplacement libre permettent un positionnement précis du module, mais chaque plaque doit être positionnée approximativement par rapport aux trous de montage de votre module avant de fixer les vis. Maintenez le module contre les rails Eurorack de sorte que chacun des trous de montage soit aligné avec un rail fileté ou une plaque filetée. Fixez les vis partiellement pour commencer, ce qui permettra de petits ajustements au positionnement pendant que vous les alignerez tous. Une fois la position finale établie, serrez les vis vers le bas. Das Modul wird mit dem erforderlichen Stromkabel für den Anschluss an ein Standard-Eurorack-Stromversorgungssystem geliefert. Befolgen Sie diese Schritte, um das Modul mit Strom zu versorgen. Es ist einfacher, diese Verbindungen herzustellen, bevor das Modul in ein Rackgehäuse eingebaut wurde. 1. Schalten Sie das Netzteil oder das Rackgehäuse aus und ziehen Sie das Netzkabel ab. 2. Stecken Sie den 16-poligen Stecker am Netzkabel in die Buchse am Netzteil oder im Rack-Gehäuse. Der Anschluss verfügt über eine Lasche, die an der Lücke in der Buchse ausgerichtet ist, sodass sie nicht falsch eingesetzt werden kann. Wenn das Netzteil keine Schlüsselbuchse hat, achten Sie darauf, Pin 1 (-12 V) mit dem roten Streifen am Kabel auszurichten. 3. Stecken Sie den 10-poligen Stecker in die Buchse auf der Rückseite des Moduls. Der Anschluss verfügt über eine Lasche, die zur korrekten Ausrichtung an der Buchse ausgerichtet wird. 4. Nachdem beide Enden des Netzkabels fest angeschlossen wurden, können Sie das Modul in einem Gehäuse montieren und die Stromversorgung einschalten. Installation Die erforderlichen Schrauben sind im Lieferumfang des Moduls für die Montage in einem Eurorack-Gehäuse enthalten. Schließen Sie das Netzkabel vor der Montage an. Abhängig vom Rack-Gehäuse kann es eine Reihe von festen Löchern geben, die entlang der Länge des Gehäuses 2 PS voneinander entfernt sind, oder eine Schiene, mit der einzelne Gewindeplatten entlang der Länge des Gehäuses gleiten können. Die frei beweglichen Gewindeplatten ermöglichen eine präzise Positionierung des Moduls. Jede Platte sollte jedoch in der ungefähren Beziehung zu den Befestigungslöchern in Ihrem Modul positioniert werden, bevor Sie die Schrauben anbringen. Halten Sie das Modul so gegen die Eurorack-Schienen, dass jedes der Befestigungslöcher mit einer Gewindeschiene oder einer Gewindeplatte ausgerichtet ist. Bringen Sie die Schrauben teilweise an, um zu beginnen. Dadurch können Sie die Position geringfügig anpassen, während Sie alle ausrichten. Ziehen Sie die Schrauben fest, nachdem die endgültige Position festgelegt wurde. 10 173 QUAD GATE/MULTIPLES (PT) Conexão de força O módulo vem com o cabo de alimentação necessário para conectar a um sistema de fonte de alimentação Eurorack padrão. Siga estas etapas para conectar a alimentação ao módulo. É mais fácil fazer essas conexões antes que o módulo seja montado em um gabinete de rack. 1. Desligue a fonte de alimentação ou o gabinete do rack e desconecte o cabo de alimentação. 2. Insira o conector de 16 pinos do cabo de alimentação no soquete da fonte de alimentação ou no gabinete do rack. O conector possui uma aba que se alinhará com a lacuna no soquete, portanto, não pode ser inserido incorretamente. Se a fonte de alimentação não tiver um soquete chaveado, certifique-se de orientar o pino 1 (-12 V) com a faixa vermelha no cabo. 3. Insira o conector de 10 pinos no soquete na parte traseira do módulo. O conector possui uma guia que se alinha ao soquete para orientação correta. 4. Depois que ambas as extremidades do cabo de alimentação forem conectadas com segurança, você pode montar o módulo em uma caixa e ligar a fonte de alimentação. (IT) Connessione di alimentazione Il modulo viene fornito con il cavo di alimentazione necessario per il collegamento a un sistema di alimentazione Eurorack standard. Seguire questi passaggi per collegare l'alimentazione al modulo. È più facile effettuare questi collegamenti prima che il modulo sia stato montato in un case rack. 1. Spegnere l'alimentatore o il case del rack e scollegare il cavo di alimentazione. 2. Inserire il connettore a 16 pin del cavo di alimentazione nella presa sull'alimentatore o sul case del rack. Il connettore ha una linguetta che si allineerà con lo spazio nella presa, quindi non può essere inserito in modo errato. Se l'alimentatore non dispone di una presa con chiave, assicurarsi di orientare il pin 1 (-12 V) con la striscia rossa sul cavo. 3. Inserire il connettore a 10 pin nella presa sul retro del modulo. Il connettore ha una linguetta che si allineerà con la presa per un corretto orientamento. 4. Dopo che entrambe le estremità del cavo di alimentazione sono state fissate saldamente, è possibile montare il modulo in una custodia e accendere l'alimentatore. Instalação Installazione Os parafusos necessários estão incluídos com o módulo para montagem em uma caixa Eurorack. Conecte o cabo de alimentação antes da montagem. Dependendo da caixa do rack, pode haver uma série de orifícios fixos espaçados de 2 HP ao longo do comprimento da caixa, ou um trilho que permite que placas roscadas individuais deslizem ao longo do comprimento da caixa. As placas roscadas de movimento livre permitem o posicionamento preciso do módulo, mas cada placa deve ser posicionada em uma relação aproximada com os orifícios de montagem em seu módulo antes de prender os parafusos. Segure o módulo contra os trilhos Eurorack de forma que cada um dos orifícios de montagem fiquem alinhados com um trilho ou placa rosqueada. Prenda os parafusos parcialmente para começar, o que permitirá pequenos ajustes no posicionamento enquanto você os alinha. Depois de estabelecida a posição final, aperte os parafusos. Le viti necessarie sono incluse con il modulo per il montaggio in una custodia Eurorack. Collegare il cavo di alimentazione prima del montaggio. A seconda del case del rack, potrebbero esserci una serie di fori fissi distanziati di 2 HP l'uno dall'altro lungo la lunghezza del case, o un binario che consente alle singole piastre filettate di scorrere lungo la lunghezza del case. Le piastre filettate a movimento libero consentono un posizionamento preciso del modulo, ma ciascuna piastra deve essere posizionata in relazione approssimativa con i fori di montaggio nel modulo prima di fissare le viti. Tenere il modulo contro le guide Eurorack in modo che ciascuno dei fori di montaggio sia allineato con una guida filettata o una piastra filettata. Attaccare le viti in parte per iniziare, il che consentirà piccoli aggiustamenti al posizionamento mentre le si allineano tutte. Dopo aver stabilito la posizione finale, serrare le viti. (NL) Stroomaansluiting De module wordt geleverd met de benodigde voedingskabel voor aansluiting op een standaard Eurorack-voedingssysteem. Volg deze stappen om de module van stroom te voorzien. Het is gemakkelijker om deze verbindingen te maken voordat de module in een rekbehuizing is gemonteerd. 1. Schakel de voeding of de rekbehuizing uit en koppel de voedingskabel los. 2. Steek de 16-pins connector van de voedingskabel in de aansluiting op de voedingseenheid of rekbehuizing. De connector heeft een lipje dat wordt uitgelijnd met de opening in de socket, zodat deze niet verkeerd kan worden geplaatst. Als de voeding geen contactdoos met sleutel heeft, zorg er dan voor dat pin 1 (-12 V) met de rode streep op de kabel wordt georiënteerd. 3. Steek de 10-pins connector in de aansluiting aan de achterkant van de module. De connector heeft een lipje dat uitgelijnd is met de aansluiting voor de juiste oriëntatie. 4. Nadat beide uiteinden van de voedingskabel stevig zijn bevestigd, kunt u de module in een hoesje monteren en de voeding inschakelen. Installatie De benodigde schroeven worden bij de module geleverd voor montage in een Eurorack-koffer. Sluit de voedingskabel aan voor montage. Afhankelijk van de rackbehuizing kan er een reeks vaste gaten zijn die 2 HP uit elkaar liggen over de lengte van de behuizing, of een rail waarmee afzonderlijke platen met schroefdraad langs de lengte van de behuizing kunnen schuiven. De vrij bewegende plaatjes met schroefdraad maken een nauwkeurige positionering van de module mogelijk, maar elke plaat moet ongeveer in verhouding tot de montagegaten in uw module worden geplaatst voordat u de schroeven bevestigt. Houd de module tegen de Eurorack-rails zodat elk van de montagegaten is uitgelijnd met een rail met schroefdraad of een plaat met schroefdraad. Bevestig de schroeven halverwege om te beginnen, waardoor kleine aanpassingen aan de positionering mogelijk zijn terwijl u ze allemaal op één lijn krijgt. Nadat de definitieve positie is bepaald, draait u de schroeven vast. Quick Start Guide 11 (SE) Strömanslutning Modulen levereras med den nödvändiga strömkabeln för anslutning till ett vanligt Eurorack-nätaggregat. Följ dessa steg för att ansluta ström till modulen. Det är lättare att göra dessa anslutningar innan modulen har monterats i ett rackfodral. 1. Stäng av strömmen eller rackhöljet och koppla bort strömkabeln. 2. Sätt i den 16-poliga kontakten på strömkabeln i uttaget på strömförsörjningen eller rackfodralet. Kontaktdonet har en flik som kommer i linje med springan i uttaget, så att den inte kan sättas in på fel sätt. Om strömförsörjningen inte har ett nyckeluttag, se till att orientera stift 1 (-12 V) med den röda remsan på kabeln. 3. Sätt i 10-polig kontakt i uttaget på modulens baksida. Kontaktdonet har en flik som kommer i linje med uttaget för korrekt orientering. 4. När båda ändarna av strömkabeln har anslutits ordentligt kan du montera modulen i ett fodral och slå på strömförsörjningen. Installation De nödvändiga skruvarna ingår i modulen för montering i ett Eurorack-fodral. Anslut strömkabeln före montering. Beroende på stativhöljet kan det finnas en serie fasta hål som är åtskilda 2 hk längs höljets längd eller ett spår som gör att enskilda gängade plattor kan glida längs höljets längd. De fritt rörliga gängade plattorna möjliggör exakt positionering av modulen, men varje platta bör placeras i ungefärlig relation till monteringshålen i din modul innan skruvarna fästs. Håll modulen mot Eurorack-skenorna så att var och en av monteringshålen är inriktade mot en gängad skena eller gängad platta. Fäst skruvarna delvis för att börja, vilket möjliggör små justeringar av positioneringen medan du justerar dem alla. När den slutliga positionen har fastställts drar du åt skruvarna. 12 173 QUAD GATE/MULTIPLES (FR) Podlczenie zasilania Do modulu dolczony jest wymagany kabel zasilajcy do podlczenia do standardowego systemu zasilania Eurorack. Wykonaj ponisze czynnoci, aby podlczy zasilanie do modulu. Latwiej jest wykona te polczenia przed zamontowaniem modulu w obudowie rack. 1. Wylcz zasilacz lub obudow szafy i odlcz kabel zasilajcy. 2. Wló 16-stykowe zlcze przewodu zasilajcego do gniazda w zasilaczu lub w szafie typu Rack. Zlcze ma wypustk, która bdzie wyrównana ze szczelin w gniedzie, wic nie mona jej nieprawidlowo wloy. Jeli zasilacz nie ma gniazda z kluczem, naley zorientowa styk 1 (-12 V) z czerwonym paskiem na kablu. 3. Wló 10-pinowe zlcze do gniazda z tylu modulu. Zlcze ma wypustk, która bdzie wyrównana z gniazdem, aby zapewni prawidlow orientacj. 4. Po solidnym zamocowaniu obu koców kabla zasilajcego mona zamontowa modul w obudowie i wlczy zasilacz. Instalacja Do modulu dolczone s niezbdne ruby do montau w skrzynce Eurorack. Podlcz kabel zasilajcy przed montaem. W zalenoci od obudowy szafy moe wystpowa szereg stalych otworów rozmieszczonych w odstpach 2 HP na calej dlugoci obudowy lub prowadnica, która umoliwia przesuwanie pojedynczych gwintowanych plyt wzdlu calej obudowy. Swobodnie poruszajce si gwintowane plytki umoliwiaj precyzyjne ustawienie modulu, ale kada plyta powinna by ustawiona w przyblieniu w stosunku do otworów montaowych w module przed przykrceniem rub. Przytrzymaj modul na szynach Eurorack, tak aby kady z otworów montaowych byl wyrównany z szyn gwintowan lub plyt gwintowan. Wkr ruby czciowo, aby rozpocz, co pozwoli na drobne korekty poloenia, gdy wszystkie zostan wyrównane. Po ustaleniu ostatecznego poloenia dokrci ruby. Specifications Signal Input Type Impedance Maximum input level Signal Output Type Impedance Maximum output level Frequency response Output noise Gate Control Type Impedance Switching threshold Maximum input level Multiples Type Arrangement Compatibility Power Power supply Current draw Physical Dimensions Rack units Weight 3.5 mm jack, DC coupled 160 k, unbalanced +17 dBu 3.5 mm jack, DC coupled 1 k, unbalanced +17 dBu DC to 20 kHz < -90 dBu, 22 Hz - 22 kHz 2 x 3.5 mm jacks, non-inverting and inverting > 50 k, unbalanced Non inverting > +3 V, inverting < +1.5 V 10 V p-p 24 x 3.5 mm TS mono jacks, unbalanced 6 sets of 4 parallel jacks, passive CV and audio signals Eurorack 40 mA (+12 V), 40 mA (-12 V) 28 x 81 x 129 mm (1.1 x 3.2 x 5.1") 16 HP 0.18 kg (0.4 lbs) Quick Start Guide 13 14 173 QUAD GATE/MULTIPLES Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/ EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC. Full text of EU DoC is available at https://community.musictribe.com/ EU Representative: Music Tribe Brands DK A/S Address: Gammel Strand 44, DK-1202 København K, Denmark UK Representative: Music Tribe Brands UK Ltd. Address: 6 Lloyds Avenue, Unit 4CL London EC3N 3AX, United Kingdom Quick Start Guide 15 We Hear YouAdobe PDF Library 16.0 Adobe InDesign 16.4 (Windows)