Godox M600R KNOWLED Full Color LED Light Instruction Manual

Instruction Manual for Godox models including: M600R, M600R KNOWLED Full Color LED Light, M600R, KNOWLED Full Color LED Light, Full Color LED Light, LED Light, Light

诺力全彩LED 影视灯KNOWLED Full color LED Light

File Info : application/pdf, 57 Pages, 5.40MB

KNOWLED M600R

LED KNOWLED Full color LED Light

Instruction Manual

V1.1 /Instruction Manual

V1.00 /Firmware

1. 2.
3.
4. LED 5.
6.
7. -20 45 8. 9.
10.
11.
12. 13. 14. 15. 16. 17. 18. 19. ROHSCE FCC 20. 21. -- 22. 23.

M600R 700W LED IP54

700W 100 0 1800K-10,000K CRI 96 TLCI 96, 4 S DMX DMX IP54 14

LED

: CMIIT ID: 24J44811A005
2

4. U

8. ACC( )

9. DC

10. 28mm

56
8 9

10 3

1. 2. 3. DC 4. 5. LED 6. MODE 7. MENU 8. LOCK 9. PRESET 10. 11. DMX OUT 12. DMX IN 13. USB-A 14. AC 15. DC 16. LAN

10 9 8 7 6

11 12 13 4

16 15 14

×1

U ×1

×1

BR45 ×1 ×1

AC ×1

DC ×1

×1

SC20 ×1

1. U

1.1

1.2

1.3 U U " "

1.4

2. U

2.1 U
3. /

2.2 U

3.1

3.2
7

4. /

4.1
5.

4.2

5.1
8

6. DMX 6.1 DMX
LumenRadio CRMX TX DMX512

CRMX CRMX

6.2 DMX

CRMX

DMX512

DMX

DMX 9

DMX

CCT
MODE CCT , CCT
/ / -
0 ~100 0.1 1800K~10000K( 100K ) - -100 ~100 ( 1 )

MODE
85.2% 10000K

-80%
HSI
MODE HSI HSI / / 0 ~100 0.1 0° ~360° ( 1° ) 0 ~100 ( 1 )
10

RGBW
MODE RGBW RGBW / / / /
0 ~100 0.1 0 ~100 ( 0.1 ) 0 ~100 ( 0.1 ) 0 ~100 ( 0.1 ) 0 ~100 ( 0.1 )
GEL
MODE GEL GEL / / / / / /
0 ~100 0.1 R-GEL/L-GEL : R-GELCOR./CAL./SPC./CINE. L-GELCOR./COLOR./600/COS./700 3200K 5600K -10° ~ +10° ( 1° ) -20 ~+20 ( 1 )

0
700 0

L-GEL 700 5600K 0%

X-Y
MODE X-Y X-Y /X /Y /
0 ~100 0.1 X 0.0000~0.8000 Y 0.0000~0.8000 GamutRec.2020DCI-P3 Rec.709Black Body

FX
MODE FX FX / / / / / / / / / / / SOS/ /

0 ~100 0.1 / CCT/HSI / 1800K-10000K/0-360° : / 1-100 /

0 ~100 0.1 / 1800K-10000K / /1-10 /2-20

0 ~100 0.1 / 30%-90% /1-100

0 ~100 0.1 / CCT/HSI / 1800K-10000K/0-360° 1-100 12

0 ~100 0.1 / CCT/HSI 1-100

0 ~100 0.1 / 1-100

0 ~100 0.1 / 1-100 : 1-100

0 ~100 0.1 / CCT/HSI / 1800K-10000K/0-360° : / : 1-100 1-100

10.

0 ~100 0.1 / CCT/HSI / 1800K-10000K/0-360° 1-100

11.

0 ~100 0.1 / : + + + + + + + 1-5

12.SOS
SOS
0 ~100 0.1 / CCT/HSI / 1800K-10000K/0-360°

13.

0 ~100 0.1 / 0 ~100 1 1-100

14.

0 ~100 0.1 / 0 ~100 1 1-100

MENU DMX CRMX ArtNet&sACN

1.DMX
DMX /DMX /RDM /DMX / /

V0.21 M600R

510

DMX/RDM https://www.godox.com.cn/ DMX
16

2. CRMX CRMX CRMX / / / MENU CRMX / / 5dBm11dBm16dBm20dBm
3. / MENU MAC
"GODOX Light"App "Godox Light" app 1. app app 2.App V3.0
17

4. DHCP/Art-Net2.x/Art-Net 10.x/ MENU
18

5.Art-Net & sACN
Art-Net&sACN Art-Net&sACN/Art-Net Net/Art-Net Sub-Net/Art-Net Port/Art-Net Universe/ sACN Universe MENU

6.
S / MENU

1-10

MENU Rec.2020DCI-P3

Rec.2020

Rec.709

DCI-P3

Rec.709

9.
/ / / /MENU

10. 10 -100 MENU
20

11.
/English MENU

12.
MENU

1. https://www.godox.com.cn/firmware-continuous-light U 2. U USB-A 3. 4. 1. U BIN 2.USB-A 5V/1.5A USB

13.
/ English 100

14.
UID MENU

LOCK LOCK

PRESET 1-20 / / / PRESET

7. 1 2 3 4

4.7% 4.7% 4.7% 4.7%

LED LED -- LED

1800K

lux

969

2800K

lux

2210

205

3200K

lux

2250

209

4300K

lux

2390

222

5600K

lux

2560

238

6500K

lux

2730

254

8500K

lux

2700

251

10000K

lux

2620

244

5m 402 37 936 87 959 89 1010 94 1100 102 1150 107 1140 106 1100 102

7m
240 22 539 50 552 51 577 54 627 58 663 62 662 62 632 59

1800K

lux

5130 1800

476 167

2800K

lux

10900 3850

1010 358

3200K

lux

11200 3960

1040 368

4300K

lux

11900 4190

1100 389

5600K (45° ) lux

12900 4550

1190 423

6500K

lux

13500 4790

1260 445

8500K

lux

13600 4780

1260 444

10000K

lux

13100 4600

1220 428

7m
944 88 2030 188 2090 194 2210 206 2400 223 2530 235 2520 235 2440 226

100

/ CRI TLCI
Type-A USB U

M600R 100V-240V~50/60Hz 720W 1800K-10000K -100 ~100 0%-100% /S / / 96 96 DMX 512 RDM /LumenRadio CRMX / Art-Net & sACN / APP / 40 /5V 1.5A -20 ~45 317mm*501mm*347mm/ 189mm*166mm*334mm U 10kg 6kg
23

Important Safety Instructions and Precautions
First of all, as the most basic principle: This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety precautions must always be followed during use, as follows:
1. The product manual must be read and understood before use. 2. Professional lighting is prohibited for children. When children are near, parents or
accompanying persons must supervise closely to prevent children from personal injury due to collision with lamps or private use of lamps. 3. This lighting product is not ordinary lighting product and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product. 4. When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns. 5. When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and seek medical attention in time. 6. If the lamp bead is damaged or deformed by heat, stop using it, and contact the manufacturer, service agent or qualified maintenance personnel to replace the lamp bead in time to avoid accidents. 7. This product is only suitable for use in -20 to 45 working environment temperature and normal humidity environment. 8. Do not use damaged equipment or accessories, and wait for professional maintenance personnel to check and repair to confirm being normal before use. 9. During using, if the casing of this product is broken due to being dropped, squeezed or subjected to strong impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic components. 10. If an extension cord is required, please use an extension cord with a current rating greater than or equal to that of the equipment. If an extension cord is rated less than the equipment, overheating may result. 11. Some products have long power cords, please place the power cords properly and keep them in a safe place. Avoid contacting the power cord with hot surfaces, avoid misplacement that could cause pulling damage, or trip on-site personnel. Please use the certified power cord from the original manufacturer. If the product is damaged by using a non- certified power cord, it will not be repaired by our factory. 12. Be sure to unplug equipment from the power outlet before cleaning and repairing. When not in use, do not pull the power cord to unplug the equipment. For normal power-off, please hold both ends of the plug of the equipment with your hands and pull the plug out of power outlet. This equipment needs to be connected to a grounded outlet. 13. Do not disassemble the product without permission. If the product fails, it must be checked and repaired by authorized maintenance personnel. 14. Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place. 15. Do not place equipment near flammable and volatile solvents such as alcohol and gasoline. 16. Do not use accessories that are not recommended by our factory to avoid fire, electric shock or personal injury.
24

17. When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth to wipe the dirt of the equipment.
18. Please take off the protective cover before using. 19. This product has passed ROHSCE and FCC certification, please refer to the relevant
national standards for use and operation. 20. The safety instructions are formulated according to the strict testing of the factory, and
the design and specifications of the equipment are subject to change without prior notice. Customers can view the latest electronic instructions on the official website of GODOX and learn about the latest product information. 21. One-year warranty period, accessories such as consumable batteries, adapters, power cords, etc. are not covered by this warranty. 22. If it is found that the equipment is repaired without authorization, the one-year warranty period will be canceled and relevant fees will be charged for maintenance. 23. Machine failures caused by non-standard operation are not covered by the warranty. keep these instructions!
25

Foreword
Thank you for purchasing a Godox product. The Godox M600R LED video light is a powerful lighting solution with a maximum output power of 700W. It features a full-color LED light source, allowing adjustable CCT and brightness to create the desired atmosphere according to different themes. The light beads are high-brightness and high-definition, supporting thousand-bit brightness adjustments. The separation of the light body and power adapter, along with its IP54 waterproof and dustproof rating and variouswireless control options, make it suitable for both indoor and outdoor environments. The M600R is specifically designed to provide reliable lighting for small-scale advertising, microfilm shooting, outdoor recording, and other similar scenarios.
Main Features
700W strong output power. Thousand-bit adjustable brightness from 0% to 100%. Wide CCT range adjustable from 1800-10000K. Super high CRI: CRI96 TLCI96 Four dimming curves: linear, S-curve, exponential, logarithmic. Multiple control methods: control box, wired DMX, wireless DMX, Bluetooth, Ethernet. Both the lamp head and controller have IP54 protection rating, suitable for all-weather operation. Low lamp head temperature, excellent color stability, and long lifespan. 14 lighting modes available, fulfilling most basic special effect requirements.
Warnings
Do not look directly at the LED light or illuminate at others' eyes. Do not plug or unplug the power cable or connecting cable when the power is turned on, otherwise personal injuries may occur. Do not cover the heat dissipation vent in working status. Keep out of reach of children. Please make sure to follow the instruction manual and correctly use this professional lighting device.
Don't stare at a bright light source
26

Name of Parts
Light Body 1

1. Handle

2. Direction Adjustment Handle

3. Lanyard Attachment

4. Yoke

5. Mount Locking Pusher

6. Bowens Mount

7. Quick Installation Device

8. ACC (Accessory Serial Port)

9. DC Input Port

10.28mm Support Pole

56
8 9

10 27

Controller
1.Power Switch 2.Remove Controller Port 3.DC Output Port 4.Adjust Dial 5. LED Status Indicator 6.MODE Button 7.MENU Button 8.LOCK Button 9.PRESET Button 10.Display 11.DMX OUT Port 12.DMX IN Port 13.USB-A Port 14.AC Input Port 15.DC Input Port 16.LAN Port

10 9 8 7 6

11 12 13 28

16 15 14

What's Inside

Light Body ×1

Yoke ×1

Controller ×1

Reflector BR45 ×1

Light Protection Cover ×1

AC Power Cord ×1

DC Cable ×1

Tying Rope ×1

Safety Wire ×1

Pipe Clamp ×1 Instruction Manual ×1

Soft Case SC20 ×1

Note: Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only, products to prevail in kind.
29

Installation and Disassembly
1.Installing the Yoke

1.1 Place the light on a flat surface with the heat dissipation side facing up, the four legs of the light facing downwards, and the lightemitting surface facing towards you.

1.2 Hold down the quick installation device button on the light body and open the wrench.

1.3 For installing the yoke, ensure that the direction adjustment handle is on the right side. Hold the yoke at both ends with both hands, align it with the quick installation device, and insert it from bottom to top. Then, tighten the wrenches on both sides. You will hear a "click" sound, indicating that the installation is complete.

1.4 Install the light onto the roller stand and tighten the fixing knob of the roller stand. Note: The roller stand is not included in the standard package and needs to be purchased separately.
Due to its large weight, please handle the installation with care to avoid personal injury.
30

2.Removing the Yoke

2.1 Hold the yoke of the light and remove it from the roller stand, placing it on a flat surface.

2.2 Press the quick installation device button and open the wrench to remove the yoke.

3. Installing/Removing the Light Protection Cover

3.1 Align the light protection cover with the lamp head socket and rotate it clockwise to install it.

3.2 Press the mount locking pusher and rotate it counterclockwise to remove the light protection cover.

4. Installing/Removing the Reflector

4.1 Align the reflector with the lamp head mount and insert it, then rotate it clockwise to install it securely.

4.2 Hold the mount locking pusher and rotate it counterclockwise to remove the reflector.
Note: Please ensure proper alignment when inserting into the mount.

5. Mounting the Controller to the Light Stand

5.1 Loosen the handle of the pipe clamp, insert it into the light stand pole, and rotate the handle clockwise to lock the pipe clamp securely. Finally, align the controller's quick installation device with the slot on the pipe clamp and insert it.
32

6.Connect to DMX Controller 6.1 Wireless DMX Connection
LumenRadio CRMX TX DMX512
6.2 Wired DMX Connection

CRMX CRMX CRMX

DMX512

DMX Connection

DMX Connection 33

DMX Connection

Power Switch
To power on or power off the device, simply press and hold the controller's power button.

CCT Mode
Briefly press the MODE button to switch to CCT mode. Briefly rotate the adjust dial to select CCT mode and press it to enter CCT mode interface.
Rotate the select dial to adjust brightness/CCT/ magenta-green adjustment. Press the adjust dial briefly to enter a specific setting. Rotate the dial counterclockwise to decrease the parameter value and clockwise to increase the parameter value. Brightness: 0%~100% (in increments of 0.1%) CCT: 1800K~10000K (in increments of 100K) Magenta-green: -100%~100% (in increments of 1%)

MODE
85.2% 10000K

-80%

HSI Mode
Press the MODE button briefly to enter the mode selection interface. Rotate the adjust dial to select the HSI Mode, and press the select dial briefly to enter the HSI Mode.
Rotating the adjust dial allows you to adjust brightness/hue/saturation. Press the adjust dial briefly to enter a specific setting. Turn the dial counterclockwise to decrease the parameter value and clockwise to increase the parameter value. Brightness: 0%~100% (in increments of 0.1%) Hue: 0°~360° (in increments of 1°) Saturation: 0%~100% (in increments of 1%)
34

DIM HUE

SAT

RGBW Mode
Press the MODE button briefly to enter the mode selection interface. Rotate the adjust dial to select RGBW, and press the adjust dial briefly to enter the RGBW Mode.
Rotating the adjust dial allows you to adjust brightness/red/green/blue/white color. Press the adjust dial briefly to enter a specific setting. Turn the dial counterclockwise to decrease the parameter value and clockwise to increase the parameter value. Brightness: 0%~100% (in increments of 0.1%) Red: 0%~100% (in increments of 0.1%) Green: 0%~100% (in increments of 0.1%) Blue: 0%~100% (in increments of 0.1%) White: 0%~100% (in increments of 0.1%)

DIM

GEL Mode
Press the MODE button briefly to enter the mode selection interface. Rotate the adjust dial to select the GEL Mode, and press the adjust dial briefly to enter the GEL Mode.
Rotating the adjust dial allows you to adjust brightness/gel type/gel group type/color selection/CCT/hue/saturation. Press the adjust dial briefly to enter a specific setting. Turn the dial counterclockwise to decrease the parameter value and clockwise to increase the parameter value. Brightness: 0%~100% (in increments of 0.1%) Gel Type: R-GEL/L-GEL Gel Group Type: R-GELCOR./CAL./SPC./CINE. L-GELCOR./COLOR./600/COS./700
Color Temperature: 3200K or 5600K Hue: -10°~+10° (in increments of 1°) Saturation: -20%~+20% (in increments of 1%)

DIM
0

L-GEL 700

700 CCT 5600K

Hue

0 SAT

X-Y Mode
Press the MODE button briefly to enter the mode selection interface. Rotate the adjust dial to select the X-Y Mode, and press the adjust dial briefly to enter the X-Y Mode.
Rotating the adjust dial allows you to adjust brightness/X-coordinate/Y-coordinate/color temperature or color space. Press the adjust dial briefly to enter a specific setting and then rotate the adjust dial to adjust the parameter. Brightness: 0%~100% (in increments of 0.1%) X-coordinate: 0.0000~0.8000 Y-coordinate: 0.0000~0.8000 Color Temperature or Color Space: Gamut, REC.2020, DCI-P3, Rec.709, Black Body

DIM

FX Mode
Press the MODE button briefly to enter the mode selection interface. Rotate the adjust dial to select the FX Mode, and press the adjust dial briefly to enter the FX Mode. Rotating the adjust dial allows you to select from the following light effects: flash/ lightning/ cloudy/broken bulb/TV/candle/firework/explosion/welding/police car/SOS/RGB cycle/party. Press the adjust dial briefly to enter a specific setting.
1. Flash This light effect simulates the flash of a strobe light or a traditional magnesium light, often used to create a lively and dynamic atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed.
Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Type: CCT/HSI CCT/Hue: 1800K-10000K/0-360° Trigger: Manual/Auto Speed: 1-100 Mode: Flash/Magnesium Light
Note: If you select Manual mode, press the select dial briefly once to trigger the flash light effect.

2. Lightning This light effect simulates the lightning of thunder, often used to create a tense, terrifying, or mysterious atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off CCT: 1800K-10000K Trigger: Manual/Auto Flashes: Random/1-10 Frequency: Random/2-20
Note: If you select Manual mode, press the adjust dial briefly once to trigger the lightning effect.
3. Cloudy This light effect simulates the obstructive effect of clouds and is often used to create a gloomy, oppressive, or sad atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Brightness Ratio: 30%-90% Speed: Random/1-100
4. Broken Bulb This light effect simulates a flash from a broken bulb and is often used to create a dim, yellowish atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Type: CCT/HSI CCT/Hue: 1800K-10000K/0-360° Speed: 1-100
37

5. TV This light effect simulates the lighting effect of a TV or screen and is often used to create a cold, mechanical, or digitized atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Type: CCT/HSI Speed: 1-100
6. Candle This light effect simulates the lighting effect of a candle and is often used to create a soft, warm, and flickering atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Speed: 1-100
7. Fire This light effect simulates the lighting effect of a flame and is often used to create a bright, warm, and flickering atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Speed: 1-100
38

8. Firework This light effect simulates the lighting effect of firework and is often used to create a colorful, romantic, and dazzling atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to enter an option and then adjust the parameter by rotating the dial as needed. Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Speed: 1-100 Embers: 1-100
9. Explosion This light effect simulates the lighting effect of an explosion and is often used to create a bright, intense, and flickering atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed.
Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Color: CCT/HSI CCT/Hue: 1800K-10000K/0-360° Trigger: Manual/Auto Embers: 1-100 Speed: 1-100
Note: To activate the explosion light effect when set to manual mode, press the select dial once briefly.
10. Welding This light effect simulates the lighting effect of welding and is often used to create a hot and mechanical atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Brightness: 0%~100% (in increments of 0.1%) On/Off: Turn the light on or off Type: CCT/HSI CCT/Hue: 1800K-10000K/0-360° Speed: 1-100
39

11. Police Car This lighting effect simulates the flashing lights of a police car and is commonly used to create a tense, chasing, or suspenseful atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Brightness: 0% to 100% (in increments of 0.1%) On/Off: Turn the light on or off Colors: Red+Blue, Red, Blue, White+Blue, Yellow+Blue, Yellow, Red+Blue+White, Red+Yellow+Blue Modes: 1-5
12. SOS This lighting effect simulates the flashing of an SOS distress signal and is commonly used to create a dangerous, distressing, or emergency atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Brightness: 0% to 100% (in increments of 0.1%) On/Off: Turn the light on or off Type: CCT/HSI Color Temperature/Hue: 1800K-10000K/0-360°
13. RGB Cycle This lighting effect simulates the cycle and variation of colored light effects, and is commonly used to create a dreamy, sci-fi atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Brightness: 0% to 100% (in increments of 0.1%) On/Off: Turn the light on or off Saturation: 0% to 100% (in increments of 1%) Speed: 1-100
40

14. Party This lighting effect simulates the effects of colorful lights, flash lights, and lasers, and is commonly used to create a festive, joyful, high-energy atmosphere. Rotate the adjust dial to select a specific setting. Press the adjust dial briefly to select an option and then adjust the parameter by rotating the dial as needed. Brightness: 0% to 100% (in increments of 0.1%) On/Off: Turn the light on or off Saturation: 0% to 100% (in increments of 1%) Speed: 1-100
Menu Settings
Press the MENU button briefly to enter the menu settings. Rotate the adjust dial to choose from DMX, CRMX, Bluetooth, Network Settings, Art-Net & sACN, Dimming Curve, Control Mode, Color Space, Fan, Display, Language, Version & Upgrade, Factory Reset, and Fixture Info.
41

1. DMX
Press the adjust dial briefly to enter the DMX settings interface. Rotate the dial to choose from Address/DMX Mode/RDM State/DMX Lost / Termination /Extended DMX Channel. Press the dial briefly to enter the option settings, and adjust the settings by rotating the dial as needed.

Address

510

DMX Mode

RDX State

Off

DMX Lost

Hold Last Command

Termination

Off

Extend DMX Channels

Off

Note: Please refer to the "M600R DMX Practical Table" to control the device by DMX/RDM. The electronic version can be downloaded from the official website https://www.godox.com.
42

2. CRMX
Press the adjust dial briefly to enter the CRMX settings interface. Rotate the dial to choose from CRMX On/Off, Mode, Transmit Power, and Reset. Press the dial briefly to enter a specific setting. Once the settings are complete, press the MENU button briefly to return to the previous level.
Reset: Press the adjust dial briefly to enter the reset interface, then press the dial briefly to reset.
CRMX: On/Off Mode: Transmit/Receive Mode Transmit Power: 5dbm, 11dbm, 16dbm, 20dbm

CRMX CRMX Mode Output Power Link

Off Transmitter
20dBm Link

3. Bluetooth
Press the adjust dial briefly to enter the Bluetooth settings interface. Rotate the dial to choose from Bluetooth On/Off and Bluetooth Reset, then press the dial briefly to enter a specific setting. Once the settings are complete, press the MENU button briefly to return to the previous level.
Bluetooth On/Off: Adjust the setting by rotating the adjust dial.
Bluetooth Reset: Press the dial briefly, then press it again to confirm the reset. Bluetooth MAC Address: Located in the lower left corner of the interface, making it easy to find the Bluetooth of the fixture.
Download"GODOX Light"App Scan the QR code to download the "Godox Light" smartphone App (can be used in Android and iOS).
Note:
1.The App can be used directly on the firstly installed device (smartphone or laptop). When change to other mobile device (smartphone or iPad), the light shall be reset before the normal connection of the app.
2.The app version should be 3.0 or above.

Bluetooth Bluetooth Reset
MAC:A426

Off Reset

4. Network Settings
Press the adjust dial briefly to enter network settings interface. Press the adjust dial briefly to select network mode, then rotate to select among DHCP, Art-Net 2.x, Art-Net 10.x and manual. Finally, press the MENU button briefly to return to the previous menu.

Level 1 Option Level 2 Option

Network Mode DHCP

Art-Net2.x

Art-Net 10.x

Manual

AAA.BBB.CCC.DDD

Subnet Mask 255.BBB.CCC.DDD

Gateway

AAA.BBB.CCC.DDD

Description DHCP mode To use 2.B.C.D network To use 10.B.C.D network Set the network IP, subnet mask, and default gateway manually The ID address is assigned by DHCP in DHCP mode. The ID address is 2.B.C.D in Art-Net 2.x mode. The ID address is 10.B.C.D in Art-Net 10.x mode. In manual mode: AAA0-255 BBB0-255 CCC0-255 DDD0-255 The subnet mask is 255.BBB.CCC.DDD and can not be adjusted by menu settings in DHCP/Art-Net 2.x/Art-Net 10.x mode. In manual mode: AAA0-255 BBB0-255 CCC0-255 DDD0-255 The gateway is assigned by DHCP in DHCP mode. The gateway is 2.B.C.D in Art-Net 2.x mode. The gateway is 10.B.C.D in Art-Net 10.x mode. In manual mode: AAA0-255 BBB0-255 CCC0-255 DDD0-255

5. Art-Net & sACN Press the adjust dial briefly to enter Art-Net & sACN setting interface. Rotate the adjust dial to select options among Art-Net&sACN, Art-Net Net, Art-Net Sub-Net, Art-Net Port, Art-Net Universe and sACN Universe, then press the adjust dial briefly to enter a specific setting. Once the settings are complete, press the MENU button briefly to return to the previous menu.
6. Dimming Curves Press the adjust dial briefly to enter dimming curves setting interface. Rotate and press the adjust dial briefly to choose among linear, S-curve, exponential and logarithmic. Once the settings are complete, press the MENU button briefly to return to the previous menu.
45

7. Control Mode
Press the adjust dial briefly to enter the control mode. Press the adjust dial briefly select the mode, rotate the adjust dial to choose the corresponding mode. Once the settings are complete, press the MENU button briefly to return to the previous menu. Modes: Normal Frequency: 1-10.
8. Color Space
Press the adjust dial briefly to enter the color space. Press the adjust dial briefly select the color space, rotate the adjust dial to choose the corresponding color space. Once the settings are complete, press the MENU button briefly to return to the previous menu. Color Space: Original Gamut, Rec.2020, DCI-P3, and Rec. 709.

Control Mode Modes Frequency

Normal 10

Color Space ColoOr Sripgaicneal Gamut
Rec.2020 DCI-P3 Rec.709

Original Gamut

9. Fan
Press the adjust dial briefly to enter fan setting interface. Rotate the adjust dial briefly to choose among silent, auto, medium speed and high speed. Once the settings are complete, press the MENU button briefly to return to the previous menu.

10. Display Press the adjust dial to enter display setting interface. Rotate and press the adjust dial briefly to adjust display brightness from 10% to 100%. Once the settings are complete, press the MENU button briefly to return to the previous menu.
11. Language Press the adjust dial to enter language setting interface. Rotate and press the adjust dial briefly to select between Chinese and English. Once the settings are complete, press the MENU button briefly to return to the previous menu.
12. Version & Upgrade Press the adjust dial to enter version & upgrade setting interface to check the firmware version and upgrade instructions. Then, press the MENU button briefly to return to the previous menu.
Software Upgrade 1. Download the new firmware to the U disk from official website (https://www.godox.com.cn/ firmware-continuous-light). 2. Turn off the device. Insert the U disk with new firmware into the USB Type-A port. 3. Turn on the device, and it will automatically enter the upgrading interface. 4. It will return to the main interface upon completion. Notes: 1. New firmware must be downloaded from the official website, and keep only one BIN file in the root directory of the USB disk. 2. The USB Type-A port can only support output voltage and current of 5V/1.5A. Do not connect to over-rated USB device.
47

13. Factory Reset
Press the adjust dial briefly to enter factory reset setting interface. Rotate and press the adjust dial briefly to select yes or no, then press the adjust dial to confirm the selection. Once the factory reset is confirmed, the light will restart, and the interface will automatically display options for Simplified Chinese and English. Rotate the adjust dial to select a desired option, then press the dial to confirm the selection. At this point, the brightness value will automatically be set to 100%, and the interface will switch to the CCT mode.

14. Fixture Info
Press the adjust dial briefly to enter fixture info setting interface to check model, UID NO., firmware version, light head temp., etc. Then, press the MENU button briefly to return to the previous menu.

Fixture Info
Model: M600R UID: Firmware Version:V0.21 Light Head Temp: 21

Lock Setting
Press the LOCK button briefly, the panel will be locked when < > is displayed on the panel, press the button briefly again to unlock the panel. Note: The locking function only works on the controller panel, other operations are still available.

Preset Setting
Press the PRESET button briefly to enter preset effects interface. Rotate and press the adjust dial briefly to choose and enter preset effects 1-20, then press briefly to choose apply/delete/ save/cancel. Once the settings are complete, press the adjust dial briefly to return to the previous menu and press the PRESET button briefly to exit.

P7r.eset
Preset 1 Preset 2 Preset 3 Preset 4

4.7% 4.7% 4.7% 4.7%

Maintenance
This product, except consumables, is supported with a one-year warranty. Unauthorized service will void the warranty. Maintenance of the light must be performed by our authorized maintenance department which can provide original accessories. If the product had failures or got wet, do not use it until it is repaired by professionals. Shut down the device immediately should abnormal operation be detected.

Photometric Data

CCT

Test Condition

Unit

1800K

lux

2800K

lux

3200K

lux

4300K

lux

Bare Light fc

5600K

lux

6500K

lux

8500K

lux

10000K

lux

3m
969 90 2210 205 2250 209 2390 222 2560 238 2730 254 2700 251 2620 244

5m 402 37 936 87 959 89 1010 94 1100 102 1150 107 1140 106 1100 102

7m
240 22 539 50 552 51 577 54 627 58 663 62 662 62 632 59

CCT

Test Condition

Unit

1800K

lux

2800K

lux

3200K

lux

With

4300K Reflector lux

(45° )

5600K

lux

6500K

lux

8500K

lux

10000K

lux

5130 1800

476 167

10900 3850

1010 358

11200 3960

1040 368

11900 4190

1100 389

12900 4550

1190 423

13500 4790

1260 445

13600 4780

1260 444

13100 4600

1220 428

7m
944 88 2030 188 2090 194 2210 206 2400 223 2530 235 2520 235 2440 226

All the above tests are based on the condition of 100% brightness.

Technical Data

Model Power Supply Input Power CCT GM Adjustment Brightness Range Dimming Curves CRI TLCI Controlling Methods
Bluetooth Controlling Distance USB Type-A Port Working Environment Temperature Dimension(Yoke included)
Netweight

M600R 100V-240V~50/60Hz 720W 1800-10000K -100%~100% 0 -100 linear, S-curve, exponential, logarithmic Average96 Average96 DMX 512 Control(support RDM protocol)/Lumen Radio CRMX/Ethernet (support Art-Net & sACN protocol)/ Bluetooth Control/Light Body Control Max. 40m Firmware Upgrade/5V 1.5A Power Supply -20 ~45 Light Body: 12.48" × 19.72" × 13.66" Controller: 7.44" × 6.54" × 13.15" Light Body(Including yoke and reflector): 10kg Controller: 6kg

Specifications and data may subject to changes without notice.

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Warning
Operating frequency:2402MHz 2480MHzBT/CRMX Maximum EIRP Power: 9.36dBm(BT) / 7.91dBm(CRMX)
Declaration of Conformity GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.For more information of DoC, Please click this web link: https://www.godox.com/eu-declaration-of-conformity/ The device complies with RF specifications when the device used at 0mm from your body.
51

( ) ( )

12 3 12

0755-29609320-8062

Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Product Information Customer Information Seller Information Note

Model
Name Address Name Contact Number Address Date of Sale

Product Code Number Contact Number
Note: This form shall be sealed by the seller.

Applicable Products
Applicable ProductsThe document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are not included in this warranty scope.

Warranty Period
The warranty period of products and accessories isimplemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product.

How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases: The product or accessory has expired its warranty period; Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; The original identifying information of product or accessory is modified, alternated, or removed; No valid warranty card; Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; Breakage or damage caused by force majeure or accident; Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information

The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Name Type
Circuit board

Parts

Battery

Other Items

Electrical parts e.g.battery charger, etc. Lamp body, lamp cover, locking device, package, etc.

Maintenance Period(month) 12
3
12
No

Warranty Service Type Customer sends the product to designated site Customer sends the product to designated site Customer sends the product to designated site
Without warranty

Godox After-sale Service Call +86-755-29609320(8062)

Wechat Official Account 2 0755-296093208062 0755-25723423 godox@godox. com GODOX Photo Equipment Co., Ltd. Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com www.godox.com Made in China | 705-M600R0-06

References

Adobe InDesign 16.0 (Windows) iLovePDF