Instruction Manual for BLAUBERG models including: Iso-Primo Sound-Insulated Inline Mixed-Flow Fans, Iso-Primo, Sound-Insulated Inline Mixed-Flow Fans, Inline Mixed-Flow Fans, Mixed-Flow Fans
Iso-Primo
File Info : application/pdf, 2 Pages, 633.25KB
DocumentDocumentblaubergventilatoren.de Iso-Primo Sound-insulated inline mixed-flow fans Use Supply and extract ventilation systems installed in various premises with high requirements to the noise level. For ventilation air ducts requiring high pressure, powerful air flow and low noise level. Compatible with 200 up to 250 mm air ducts. Air flow: up to 1670 m³/h 464 l/s Power: from 87 W Noise level: from 37 dBA SOUND-INSULATED INLINE FANS Design The casing is made of galvanized steel, internally filled with 30 mm acoustic foam. Due to the conically shaped polymer impeller with specially profiled blades, the air stream circular velocity increases, which results in higher air flow and pressure, as compared to characteristics of standard axial fans Mixed-flow impeller made of high-quality plastic. The specially designed diffuser, impeller and airflow rectifier at the fan outlet provide smooth air flow distribution and enable the best combination of high capacity, powerful pressure and low noise. External airtight terminal block on the fan casing for power supply. Mounting brackets on the fan casing for mounting to the ceiling. Motor Three-speed single-phase high-efficient motor with low energy demand on ball bearings. All motors have manual reset thermal overload protection. Motor ingress protection rating IPX4. Speed control Speed selection with a built-in speed switch (US option) or an external multi-speed controller (specially ordered accessory). Smooth speed control is possible either with an external thyristor or transformer speed controller (specially ordered accessory) when connected to the maximum speed terminal. Mounting The fan is suitable for mounting in any section of the ventilation system from intake to the end of the ductwork. Ceiling mounting with a special mounting plate on the fan casing. Modifications and options T: turn-off delay timer adjustable from 2 to 30 minutes. US: three-position speed switch. G1: speed controller, temperature controller with external temperature sensor (cable length 4 m), power cable with mains plug. GI1: speed controller, temperature controller with integrated temperature sensor and power cable with mains plug. The G1 and GI1 modifications enable automatic speed control depending on indoor temperature. The optimal ventilation solution for premises requiring permanent temperature control as greenhouses, orangeries, etc. W: power cable with mains plug. Designation key Series Duct diameter [mm] Iso-Primo 200; 250 Options T: turn-off delay timer adjustable from 2 to 30 minutes US: three-position speed switch G1: speed controller, temperature controller with external temperature sensor, power cable with mains plug GI1: speed controller, temperature controller with integrated temperature sensor and power cable mains plug W: power cable with mains plug Accessories Silencers Filter boxes Electric heaters Water heaters Backdraft air dampers Air dampers Clamps Temperature controllers Speed controllers Timers/Sensors SD KFBK / KFBT INDUSTRIAL VENTILATION | 2022 EKH WKH VRV VK / VKA K MLCD E2 CDP / CDT TE(TI) / HSE(HSI) / LSE(LSI) / IRSE(IRSI) 1 2022 | INDUSTRIAL VENTILATION Overall dimensions [mm] Type D D1 H L L1 Weight [kg] Iso-Primo 200 (T, GI1, G1, W, US, USW) 198 281 339 601 739 8.2 Iso-Primo 250 (T, GI1, G1, W, US, USW) 249 337 389 601 739 9.5 H D D D1 SOUND-INSULATED INLINE FANS L L1 Technical data Parameters Speed Voltage [V / 50 Hz] Power [W] Current [A] Maximum air flow [m³/h (l/s)] RPM [min¹] Sound pressure at 3 m [dBA] Transported air temperature [°C] IP rating Motor IP rating ErP min 82 0.37 692 (192) 2229 37 Iso-Primo 200 mid 1~ 230 104 0.46 906 (252) 2634 42 -25...+55 IPX4 IP20 2018 max 113 0.51 1110 (308) 2823 44 min 144 0.70 1007 (280) 2292 38 Iso-Primo 250 mid 1~ 230 173 0.81 1404 (390) 2626 43 -25...+55 IPX4 IP20 2018 max 188 0.84 1670 (464) 2876 45 ISO-PRIMO 200 Sound power level, A-weighted Total Octave frequency bands [Hz] LpA 63 125 250 500 1000 2000 4000 8000 3 m LpA 1 m LwA to inlet [dBA] 67 LwA to outlet [dBA] 68 LwA to environment [dBA] 64 63 63 59 55 47 65 64 59 57 49 55 51 61 60 40 42 42 37 46 56 45 45 36 48 58 40 28 22 44 54 400 0 Air flow [l/s] 50 100 150 200 250 300 Static pressure [Pa] 300 200 max mid 100 min Power [W] 00 140 0 120 100 80 60 0 200 400 600 800 1000 1200 Air flow [m3/h] Air flow [l/s] 50 100 150 200 250 300 max mid min 200 400 600 800 1000 1200 Air flow [m3/h] ISO-PRIMO 250 Sound power level, A-weighted Total Octave frequency bands [Hz] LpA LpA 63 125 250 500 1000 2000 4000 8000 3 m 1 m LwA to inlet [dBA] 70 LwA to outlet [dBA] 71 LwA to environment [dBA] 65 45 56 62 64 63 60 41 49 61 64 67 65 57 55 60 58 55 54 62 57 49 59 60 54 51 61 47 39 45 55 450 0 400 Air flow [l/s] 50 100 150 200 250 300 350 400 450 500 Static pressure [Pa] 300 200 max mid min 100 Power [W] 00 200 0 160 120 200 400 600 800 1000 1200 1400 1600 1800 Air flow [m3/h] Air flow [l/s] 50 100 150 200 250 300 350 400 450 500 max mid min 80 0 200 400 600 800 1000 1200 1400 1600 1800 Air flow [m3/h] 2 blaubergventilatoren.de