Instruction Manual for SANTEC models including: 3429AT91-TM, 3429HO10-TM, 3429AT91-TM Generic Wall Mount Widespread Corneer Set, 3429AT91-TM, Generic Wall Mount Widespread Corneer Set, Wall Mount Widespread Corneer Set, Mount Widespread Corneer Set, Widespread Corneer Set, Corneer Set, Set
Santec 3429AT91-TM at Keidel Serving Cincinnati - Cincinnati-OH
Santec 9229ED10-TM Edo 3 Inch Widespread Wall Mounted Bathroom Faucet, Polished Chrome - Kitchen And Bath Authority
8"--.06/58*%&413&"% KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE SANTEC has the right to make necessary design changes when applicable. * I l l ust r at i on m ay not depi c t a c t ual p rod uct s Parts Breakdown 7 3 5 2 1 6 4 ITEM NO. PART NUMBER DESCRIPTION 1 PS-6_ _00-U ** Spout Body * 2 _ _ ** Handle Assembly * 3 PM-099 Teflon Washer 4 PM-020 Broach Extension 5 PM-017 O-Ring 6 PM-955 All Threads 7 PM-956 Bonnet Nut * Please specify the finish when ordering the part. ** Please specify option code when ordering the part. 01 Parts Breakdown 1 2 4 3 ITEM NO. PART NUMBER DESCRIPTION 1 WM-0020-1 SA Corner Valve 2 P0418 Hot Cartridge Estate 3 P0419 Cold Cartridge Estate 4 PM-1110 Mud Guard Stop Valve 0 2 Valve NOTE: Hole size for the spout and handle is 1-1/4" Valve Installation (1) for extra thickness dimensions when roughing in the valves. necessary to accurately plumb in the valve. Install the valve making sure that the measurement between the center of the valve inlet and the outside c alled t he backsea t. The MIN/MAX label on the mudguard can be used as a guide. Backset 2-3/4" Finished Wall Mud Guard MIN MAX Center of Valve Inlet 0 3 Valve NOT E: Tes t fo r pr o per fu nc t io n be f or e cl o s in g w al l s. Valve Installation (2) Using 1/2" IPS, connect corner the valves to the spout base at the desired spread. Again, allow no more than 1-1/4" diameter holes for the spout and handles. B A C K S E T F R O M F I N I S H WA L L CO LD HOT 0 4 Spout Spout Installation should be no longer than 1/2". the spout onto the pipe until it is secured with the spout facing downward. WARNING: Do not use excessi ve forc e w hen t hreading the s pout . 0 5 Handle Trim 5SJN*OTUBMMBUJPO Step 1-Thread the bonnet nut, all thread, and insert the broach assembly onto the valve and lightly tighten assembly with a 1" plumber's socket Wrench. See Diagram A. Step 2- Thread the escutcheon completely onto the all thread ensuring the broach properly engages the handle (orientation of the handle is not important at this point) Step 3- Measure the distance remaining between the handle base and wall, remove all trim items from the valve, and cut the excess distance from the end of the all thread and broach assembly. Step 4- Rethread the bonnet nut,all thread, and insert the broach assembly back onto the valve and snugly tighten the assembly with a 1" plumber's socket wrench. Step 5- Ensure the valve is in the closed position and align the handle to its respective "OFF" Position on the trim. Step 6- Thread the escutcheon on the handle onto the all thread and broach assembly ensuring The handle position remains in the closed position. Bonnet Nut Broach Assembly Escutcheon Handle Diagram A Bonnet Nut All Thread Stem Key Finished Wall 0 6Adobe Illustrator CC 2015 (Windows) Adobe PDF library 15.00