KMINA PRO Commode Toilet Chair User Manual
Model Numbers: K30010, K30014
Introduction
The KMINA PRO Commode Toilet Chair is designed to enhance the daily hygiene of individuals with reduced mobility, making the process as easy as possible for both the user and their caregiver. This versatile chair can be used in the bath, shower, or as a bedside commode. Please retain these instructions for future reference. The chair complies with EU Regulation 2017/745 on medical devices.
Product Components
Key components of the KMINA PRO Commode Toilet Chair include:
- Steering castors with overall lock (front and rear)
- Backrest
- Push handle
- Folding armrest
- Locking screw
- Disposal bucket
- Legrest lock lever
- Foot plate
- Seat with hygiene cutout
- Legrests (swing-away and removable)
Assembly Instructions
Follow these steps for assembling the KMINA PRO Commode Toilet Chair:
- Brake Activation: Lift the lock rocker to engage the brakes, preventing frame movement during assembly. To release, tread the lever.
- Backrest and Armrests: Unscrew the locking screws on the frame. Insert the backrest tubes into the frame and retighten the screws. Fold the armrests down into the position for use.
- Seat Installation: Align the seat's recess with the rear crossbar of the frame. Press the seat firmly down into the frame until it clicks securely into place, ensuring all clips engage.
- Legrest Attachment: Hook the legrests into the designated tubes and swivel them forward. The legrest lock lever can be used to secure them in an open position or allow for easy removal.
- Legrest Height Adjustment: Unscrew the connection at the rear of the legrest tube. Adjust the foot plate to the correct height, ensuring the user's legs form a 45-degree angle when their feet are placed on it. Retighten the screws. The foot plates can be raised for easier exit from the chair.
Usage Instructions
The KMINA PRO can be used in three primary ways:
1. Using with a Bucket
Before Use: Engage the locking brakes. Remove the hygiene cutout from the seat. Place the bucket (without lid) under the seat and push it from behind until it locks into place.
After Use: Pull the bucket out from the rear to empty it. Place the lid on the bucket. Clean the bucket as described in the "Cleaning and Care" section.
2. Using with a Conventional WC
Before use, ensure your toilet height is less than the maximum allowed height (refer to specifications). Pull the bucket out from the rear. Remove the hygiene cutout. Open the toilet lid. Position the chair over the toilet and engage the locking brakes.
3. Using in the Shower
Engage the locking brakes. Remove the toilet bucket and pull it out from the rear. Remove the hygiene cutout for easier personal care and cleaning. Important: Do not place the bucket while the user is seated.
Technical Specifications
| Specification | Value |
|---|---|
| Length | 35" / 88.5 cm |
| Width | 21.5" / 55.5 cm |
| Height | 37" / 93 cm |
| Seat Height | 21" / 53 cm |
| Seat Measurements | 17.3" x 16.5" / 44 x 42 cm |
| Length Without Legrests | 24.5" / 62 cm |
| Max User Weight | 265 lb / 120 kg |
| Chair Weight | 25 lb / 11.5 kg |
| Wheel Diameter (x4) | 5" / 13 cm |
Warnings and Safety Precautions
General: Report any serious incidents to the manufacturer and relevant authorities. Always check that all parts are connected, tightened, and that brakes function correctly before use. Ensure the seat is secure.
Usage Restrictions: This chair is not designed for transporting multiple people or loads. Do not use if there are signs of wear or damage. Do not exceed the maximum user weight of 265 lb (120 kg).
During Use: Ensure all wheels maintain contact with the ground on a flat, smooth surface. Use ramps for obstacles. The chair is intended for indoor use, bathrooms, and showers. Be cautious of clothing or body parts getting caught in armrests. Do not stand on legrests. Supervise children and individuals unfamiliar with operation. Brakes must be locked before use and when stationary. Be aware of tipping risks with weight shifts. Do not use if the locking brake is damaged or unusable.
Warranty Information
KMINA guarantees the Commode Toilet Chair against defects for 3 years from the original purchase date. The warranty excludes parts subject to natural wear and tear (e.g., brakes, wheels, upholstery), parts not supplied by KMINA or authorized dealers, failures due to misuse, and accidental or property damage. For returns, proper packaging (preferably original) is required to avoid shipping damage liability for KMINA.
Cleaning and Care
Clean and disinfect the chair, bucket, or toilet after each use with running water and conventional disinfectants. Frame and upholstery parts can be cleaned with a damp cloth. Use a plastic brush for cleaning wheels; avoid wire brushes.
Manufacturer Information
IMPROVING MOBILITY DEVELOPMENT S.L.
Avda. Mare Nostrum 1, Bloque 1, Pta 16
46120, Alboraya, Valencia, Spain
admin@kmina.com | www.kmina.com
