Introduction
This service manual provides detailed scheduled maintenance, troubleshooting, and repair procedures for the Genie TMZ-34/19 aerial work platform. It is intended for machine owners, users, and qualified service professionals. Basic mechanical, hydraulic, and electrical skills are required for most procedures, with some requiring specialized skills and equipment. Always refer to the Operator's Manual for safety rules and operating instructions before performing any maintenance or repair.
Genie Industries is committed to continuous product improvement. Product specifications are subject to change without notice. Readers are encouraged to report any errors or suggest improvements.
Contact Information
For further information or support, contact Genie Industries:
PO Box 97030
Redmond, WA 98073-9730 USA
Website: www.genieindustries.com
Email: techsup@genieind.com
Key Sections
- Section 1: Safety Rules - Essential safety guidelines for operating and maintaining the machine.
- Section 2: Specifications - Detailed machine, performance, and hydraulic specifications.
- Section 3: Scheduled Maintenance Procedures - Step-by-step maintenance checklists and procedures.
- Section 4: Repair Procedures - Guidance on repairing various components, including platform controls, boom components, and hydraulic systems.
- Section 5: Troubleshooting Flow Charts - Diagnostic tools to identify and resolve operational issues.
- Section 6: Schematics - Electrical and hydraulic schematics for system analysis.
