EBR-SWM Handle with Monostable Electrical Switch

Self-extinguishing technopolymer

Material

Glass-fibre reinforced polyamide based (PA) technopolymer certified self-extinguishing UL-94 V0, black colour.

Monostable Electrical Switch with Button

The device is made up of a normally open contact (NO) and a normally closed contact (NC). Switching takes place by pressing the blue button (monostable contact).

LED Indicators

A red LED and a green LED can be configured through external logic to indicate the switch status. Voltage range: 24 Vdc ± 15%.

Screw Covers

Technopolymer, grey-black colour, matte finish. Supplied assembled, removable by a screwdriver.

IP Protection

IP 65 protection class, according to EN 60529.

Standard Executions

Pass-through holes for cylindrical-head screws with hexagon socket.

Configurations:

EBR-SWM-B-C: Zinc-plated connector with 8 poles, back output.
EBR-SWM-L-C: Zinc-plated steel connector with 8 poles, left side output.
EBR-SWM-R-C: Zinc-plated connector with 8 poles, right side output.

Cable: UL: AWG22 RAL9005 PVC UL AWM Style 1569/2517.

Cable Length Options:

EBR-SWM-B-F2.5: 8 pole cable, length 2.5 metres, back output.
EBR-SWM-B-F5: 8 pole cable, length 5 metres, back output.
EBR-SWM-L-F2.5: 8 pole cable, length 2.5 metres, left side output.
EBR-SWM-L-F5: 8 pole cable, length 5 metres, left side output.
EBR-SWM-R-F2.5: 8 pole cable, length 2.5 metres, right side output.
EBR-SWM-R-F5: 8 pole cable, length 5 metres, right side output.

Features and Applications

These handles are typically assembled on machine doors or protections.

Through external logic, the LEDs can be configured to indicate the specific status of the button. For example: With the machine working, the red light is on and the green light is off. By pressing the button, the operator requests access to the protected area; in this case, the green light turns on, while the red one turns off.

The mechanical life of the button is 1 x 10⁶ cycles.

The product is manufactured in compliance with EN 60947-1:2007 + A1:2021 + A2:2014 and EN 60947-5-1:2017 standards. The CE marking is visible on one side of the handle.

In case of use of an extension with an angled connector, the direction of the cable output is shown in Fig. 1.

The EBR-SWM handle can be combined with EBR neutral handles.

Technical Data

Tensile stress and impact strength: F1, F2, L1 and L2 values reported in the table are the result of breaking tests carried out with the appropriate dynamometric equipment under the test conditions shown in the figure with ambient temperature.

Electrical Features

Load	Voltage	Current	Max Cycles
Resistive	28 Vdc	1899-12-31	25000
Resistive	115 Vac, 60 Hz	1 A	25000
Inductive	28 Vdc	2 A	25000
DWV	1050 Vrms
Logic level	5 Vdc	10 mA	1 x 10⁶

Short circuit conditioned current: 1000 A

Note: For the connector version, the maximum allowed voltage is 24 V and the maximum allowed current is 2A.

Accessories on Request

FC-M12x1 (see page 976): extensions with 8 pole M12 female axial connector.

Other Standard Executions

EBR. (see page.): single complementary handle without switch.
EBR-SWB (see page 1215): handle with bistable electrical switch.

Dimensions and Specifications

Conversion Table: 1 mm = 0.039 inch

EBR-SWM-B-C

Code	Description	L	f	d	d1	f1	D	h	h1	h2	h3	h4	B	11	F1 [N]	F2 [N]	L1 [J]	L2 [J]
260541-C1	EBR.150-SWM-B-C	160	132±0.5	8.5	13.5	16	28	44	10	30	47	11	8.5	89	2800	2900	35	8	109

EBR-SWM-L-C

Code	Description	L	f	d	d1	f2	D	h	h1	h2	h3	h4	h5	B	11	F1 [N]	F2 [N]	L1 [J]	L2 [J]
260551-C1	EBR.150-SWM-L-C	160	132±0.5	8.5	13.5	14.5	28	44	10	30	47	16	14	8.5	89	2800	2900	35	8	109

EBR-SWM-R-C

Code	Description	L	f	d	d1	f2	D	h	h1	h2	h3	h4	h5	B	11	F1 [N]	F2 [N]	L1 [J]	L2 [J]
260561-C1	EBR.150-SWM-R-C	160	132±0.5	8.5	13.5	14.5	28	44	10	30	47	16	14	8.5	89	2800	2900	35	8	111

EBR-SWM-F

Diagram showing dimensions for EBR-SWM-F series.

EBR-SWM-B-F2.5

Code	Description	L	f	d	d1	f1	D	h	h1	h2	h3	B	11	F1 [N]	F2 [N]	L1 [J]	L2 [J]
260546-C1	EBR.150-SWM-B-F2,5	160	132±0.5	8.5	13.5	16	28	44	10	30	47	8.5	89	2800	2900	35	8	230

EBR-SWM-B-F5

Code	Description	L	f	d	d1	f1	D	h	h1	h2	h3	B	11	F1 [N]	F2 [N]	L1 [J]	L2 [J]
260542-C1	EBR.150-SWM-B-F5	160	132±0.5	8.5	13.5	16	28	44	10	30	47	8.5	89	2800	2900	35	8	444

EBR-SWM-L-F2.5

Code	Description	L	f	d	d1	f2	D	h	h1	h2	h3	h5	B	11	F1 [N]	F2 [N]	L1 [J]	L2 [J]
260556-C1	EBR.150-SWM-L-F2,5	160	132±0.5	8.5	13.5	14.5	28	44	10	30	47	14	8.5	89	2800	2900	35	8	232

EBR-SWM-L-F5

Code	Description	L	f	d	d1	f2	D	h	h1	h2	h3	h5	B	11	F1 [N]	F2 [N]	L1 [J]	L2 [J]
260552-C1	EBR.150-SWM-L-F5	160	132±0.5	8.5	13.5	14.5	28	44	10	30	47	11	14	8.5	89	2800	2900	35	8	446

EBR-SWM-R-F2.5

Code	Description	L	f	d	d1	f2	D	h	h1	h2	h3	h5	B	11	F1 [N]	F2 [N]	L1 [J]	L2 [J]
260566-C1	EBR.150-SWM-R-F2,5	160	132±0.5	8.5	13.5	14.5	28	44	10	30	47	14	8.5	89	2800	2900	35	8	231

EBR-SWM-R-F5

Code	Description	L	f	d	d1	f2	D	h	h1	h2	h3	h5	B	11	F1 [N]	F2 [N]	L1 [J]	L2 [J]
260562-C1	EBR.150-SWM-R-F5	160	132±0.5	8.5	13.5	14.5	28	44	10	30	47	11	14	8.5	89	2800	2900	35	8	356

	Elesa TCC-SJA Reduction Sleeves with Spherical Seats for TCC Pipe Couplings Technical specifications for Elesa TCC-SJA reduction sleeves, made from technopolymer with spherical seats for TCC pipe couplings. Features include material, application, dimensions, and product codes.
	Elesa ECB.I Boss Cap - Technopolymer for EMW, ETW.375, EYK, and ETK Information on the Elesa ECB.I boss cap, made from PBT technopolymer. Details material, assembly, and compatibility with EMW, ETW.375, EYK, and ETK components. Includes color options and product codes.
	Elesa VPE Mini Vacuum Cup Suspensions with Built-in Spring Explore Elesa's VPE series mini vacuum cup suspensions, featuring built-in springs and threaded connections for industrial automation. These components offer impact cushioning and reliable suction hose connectivity.
	Elesa DD52R-E-RF Electronic Position Indicators Safety Instructions Safety instructions and mandatory warnings for Elesa DD52R-E-RF Electronic Position Indicators, including FCC compliance, usage guidelines, and maintenance information.
	Elesa DVA.6 Rubber Buffers: Vibration Damping Solutions Explore the Elesa DVA.6 series of rubber buffers designed for effective vibration, shock, and noise damping in industrial applications. Featuring standard and stainless steel options with detailed technical specifications.
	Elesa MVB Vertical Toggle Clamps: Specifications and Applications Detailed technical specifications, features, and applications for Elesa MVB series vertical toggle clamps, available in steel and stainless steel with straight bases.
	Elesa RE.F2-H Medium-Heavy Duty Castors with Soft Polyurethane Coating - Technical Specifications Detailed technical specifications for Elesa RE.F2-H medium-heavy duty castors. Features include soft polyurethane coating, pressure die-cast aluminium wheel centre, and available fixed or turning plate brackets with or without brake. Includes dimensions, load capacities, and rolling resistance.
	Centralina di Sicurezza Elesa CN-SFT: Istruzioni per l'Uso Istruzioni operative dettagliate e dati tecnici per la centralina di sicurezza Elesa CN-SFT, progettata per applicazioni di sicurezza industriale. Copre installazione, funzionamento, manutenzione e precauzioni di sicurezza.