Hot Wheels City Ultimate Garage Playset

Applying Labels

Refer to page 4 for instructions on applying labels.

Assembly Steps

Step 1: Connect parts A, B, C, and D as shown in the diagram.

Diagram shows base pieces A, B, C, D being connected.

Step 2: Connect parts E1, E2, E3, and E4 as shown in the diagram.

Diagram shows vertical track pieces E1, E2, E3, E4 being attached to the base.

Step 3: Attach track pieces J1 and J2 to the main structure.

Diagram shows track pieces J1 and J2 being inserted into the upper levels.

Step 4: Assemble the track supports H1 and H2 and attach them to the structure.

Diagram shows H1 and H2 being attached to the main garage structure.

Step 5: Assemble the circular track pieces F1, F2, F3, and F4.

Diagram shows circular track segments F1, F2, F3, F4 being connected.

Step 6: Connect track pieces F3, F4, G1, G2, G3, and G4 as shown.

Diagram shows track pieces connecting to the main structure, with G1-G4 attached to F3/F4.

Step 7: Attach track pieces F3 and F4 to the structure.

Diagram shows more track pieces F3 and F4 being added.

Step 8: Connect track pieces K1, K2, and K3 to the structure.

Diagram shows K1, K2, K3 being attached to the garage.

Step 9: Connect track pieces K4, K5, and K6 as shown.

Diagram shows K4, K5, K6 being added to the track system.

Step 10: Connect track pieces K4, K5, and K6.

Diagram shows K4, K5, K6 being attached.

Step 11: Connect track pieces K4, K5, and K6.

Diagram shows K4, K5, K6 being attached.

Step 12: Attach track pieces L1, L2, and L3.

Diagram shows L1, L2, L3 being connected to the structure.

Step 13: Connect track pieces L1, L2, and L3.

Diagram shows L1, L2, L3 being attached.

Step 14: Connect track pieces L3, L4, L5, and L6.

Diagram shows L3, L4, L5, L6 being connected.

Step 15: Attach track pieces L4 and L5.

Diagram shows L4 and L5 being attached.

Step 16: Connect track pieces N1 and N2.

Diagram shows N1 and N2 being attached.

Step 17: Connect track pieces N2 and N3.

Diagram shows N2 and N3 being attached.

Step 18: Connect track pieces N3, N4, and N5.

Diagram shows N3, N4, N5 being attached.

Step 19: Connect track pieces P1 and P2.

Diagram shows P1 and P2 being attached.

Step 20: Attach the dragon figure and the launcher mechanism.

Diagram shows the dragon and launcher being placed on the garage.

Step 21: Insert a car into the launcher and pull the trigger to launch.

Diagram shows a hand operating the launcher with a car.

Step 22: Move cars to parking spots and drive them in.

Diagram shows cars being parked in the garage.

Step 23: Use the launcher on Level 1 for a drag race.

Diagram shows cars racing on Level 1.

Step 24: Use the launcher on Level 2 to explore the track.

Diagram shows cars launching on Level 2.

Step 25: Use the launcher on Level 3 to spiral down.

Diagram shows cars launching on Level 3.

Step 26: Launch through the loop on Level 3.

Diagram shows a car going through a loop on Level 3.

Step 27: Launch on Level 3 and spiral down.

Diagram shows cars launching on Level 3.

Step 28: Move to the top and launch to face the dragon.

Diagram shows a car at the top of the garage, facing the dragon.

Step 29: Get eaten by the dragon and dropped back down, or hit the dragon's body to knock it down.

Diagram shows a car being swallowed by the dragon and another car hitting the dragon.

More Ways to Play

Level 1:

• Load cars and pull triggers to launch.
• Pump gas and clean cars at the service station.
• Launch a drag race on Level 1.

Level 2:

• Launch to explore Level 2.
• Fix your car on Level 2.
• Launch on Level 2 and race down the curve.

Level 3:

• Launch through the loop on Level 3.
• Launch on Level 3 and spiral down.

Dragon on Top:

• Move to the top and launch to face the dragon.
• Get eaten by the dragon and dropped back down, or hit the dragon's body to knock it down.

Performance Tips

Refer to page 31 for performance tips.