Maxpower MPD26XB Professional Speaker User Manual

Important Safety Measures

Please read all safety and operating instructions carefully before using this machine. Observe all indications about safe operation and keep these instructions for future reference.

1. Power Supply Line Protection: Ensure the electric power supply line is not trampled or pressed by heavy objects. Pay special attention to the plug and the machine's outlet. Avoid electric shock, pulling, dragging, or damaging the power supply line.
2. Ventilation: Place the unit in a ventilated area. Do not cover it with disks or cloth. Maintain a distance of at least 10 centimeters from walls. Avoid placing the unit on beds, sofas, carpets, or similar surfaces that may obstruct ventilation.
3. Casing Dismantling: Do not dismantle the casing. Touching inner components may result in serious electric shock.
4. Unusual Smell: If you detect an unusual smell or smoke, immediately cut off the power supply and unplug the unit from the wall outlet. Contact the seller or the nearest repair center.

Attention: This set is designed for AC 110V/50Hz~60Hz power supply. Use a standard power supply and ensure it is correct before use.

Product Features

• Wireless connectivity
• Plays songs stored in external audio devices
• Guitar input and Microphone inputs
• Wireless microphone included
• Includes remote control
• Built-in rechargeable battery
• X-Bass for powerful sound
• Super dynamic sound speaker

Remote Control Functions

• Standby: Powers the unit on/off.
• LINE (Audio input): Selects audio input source.
• Prev/FM CH-: Previous track or FM channel down.
• Play/pause/FM tuner: Plays/pauses music or scans for FM channels.
• Next/FM CH+: Next track or FM channel up.
• Repeat: Repeats the current track or folder.
• Stop: Stops playback.
• Volume up: Increases volume.
• Volume down: Decreases volume.
• Mute: Mutes the audio output.
• Equalizer: Adjusts treble and bass.
• Number buttons: Direct track selection.

Connecting

1. This set operates on AC 110V, 50/60Hz.
2. AC Power: The battery charges when connected to AC power. The red light indicates charging; it turns green upon full charge.
3. The internal battery charges even when the device is switched off, provided it is plugged into AC power.
4. The speaker battery can also be charged using a 12V external car battery via the "DC 12V input" (cable not included). Ensure correct connection of the positive (+) and negative (-) terminals.
5. Adjust function keys to personalize your audio preferences.

Battery & Charging

1. The unit takes approximately 8 hours for a full charge. Charging begins automatically when the power cord is connected.
2. If the battery power is low, it may cause sound distortion or stop playback. Please charge the battery promptly.
3. To maximize battery lifespan, charge the battery immediately. When the unit is not used for extended periods, the battery will gradually lose power. It is recommended to fully charge the battery at least every 30 days.
4. To conserve battery, power off the unit when not in use.

How to Connect to BT

When the speaker is turned on, the display will show "OPEN", indicating it is ready to connect. On your smart device, search for the BT device named "MPD26XB" or "MPD1530-XB" and select it to connect.

TWS Connection - How to Pair Two Speakers

1. Bring two speakers next to each other and turn both on. The display on both speakers should read "OPEN".
2. On the primary speaker, press and hold the TWS button for 3 seconds. The primary speaker will emit an alarm sound, and its display will show "BTST". The second speaker will automatically connect to the primary speaker, and its display will show "BT".
3. You can now connect your smart device via BT to listen to music from both speakers simultaneously.

Panel Function Instruction

1. LED LIGHT ON/OFF SWITCH: Controls the LED lighting.

2. MODE: Selects the mode (e.g., Bluetooth, FM, AUX). REPE: Sets repeat mode. REC: Starts recording when a card is inserted; press again to stop and play recording.

3. PREV: Previous song/channel. PLAY/TWS: Play/pause music or initiate TWS pairing. NEXT: Next song/channel.

4. POWER ON/OFF SWITCH, RESET: Turns the unit on/off and resets the device.

5. MIC.: Microphone input jack. GT.IN: Guitar input jack. M.PRI: Toggles microphone priority on/off.

6. GT.VOL: Adjusts guitar volume. M.TREBLE: Adjusts microphone treble. M.BASS: Adjusts microphone bass. ECHO: Adjusts echo effect. DELAY: Adjusts the time between the source and speaker.

7. X-BASS: Adjusts the X-Bass level.

8. EQUALIZER: Adjusts treble and bass levels.

9. MIC. VOL: Adjusts microphone volume.

10. AUDIO INPUT: Connects external audio sources.

11. DC 12V INPUT: DC 12V charging input.

12. CARD INPUT: Slot for memory cards.

13. VOLUME: Master volume control.

FCC Compliance Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.