Gicorino Wireless Microphone
User Manual
Introduction
Thank you for choosing our product. This product is a smart wireless microphone that provides professional-grade recording output. It is plug and play, requiring no app. It is suitable for online live broadcasts, video vlog shooting, program interviews, recording, video teaching, and other occasions.
The wireless microphone consists of two parts: the microphone transmitter and the receiver.
[Microphone transmitter] [Receiver]
Certifications: CE, FC. Made in China.
ID Diagram
Microphone Transmitter Components:
- ① Windproof net
- ② Microphone indicator
- ③ Microphone charging port / Monitor headphone jack
- ④ Microphone clip
- ⑤ Switch key
- ⑥ Port to connect phone
Receiver Components:
- Receiver indicator
- Type-C port of receiver
How to Use
- Step 1: Connect the receiver to the phone with the port.
- Step 2: Press the switch key of the microphone. The indicator light turns green, indicating the power is on.
- Step 3: The receiver's indicator light stays red. Open the phone's camera, live app, or other apps, and then use the microphone to receive sound.
Special Note: The receiver does not have a battery and does not require recharging during live use. If the phone's power is low during a live session, it can be recharged directly through the Type-C port (⑩).
About UI
Microphone Transmitter
| Function | How to use | Light Status |
|---|---|---|
| Power on | Press switch key about 3 seconds | Red and green flash alternately |
| Power off | Press switch key about 3 seconds | Light off |
| Pairing | Red light flashes slowly | Red light flashes slowly |
| Paired | Green light keeps on | Green light keeps on |
| Mute | Press switch key once | Green light flashes |
| Unmute | Press switch key once | Green light keeps on |
| Reverberation | Double-click | Green light after flashing red |
Receiver
| Function | How to use | Light Status |
|---|---|---|
| Plug in the device | Red light on | |
| Power off | Plug off the device | Light off |
| Pairing | Red and green flash alternately | |
| Paired | Green light keeps on | |
| Monitor | Plug in the Type-C header | The lights don't change |
| No connection (more than 3 minutes) | Light off | |
| Low battery alarm | Power on state | The red and green lights come on every 10 seconds |
| Automatic shutdown |
Note: For OPPO/VIVO/iQOO/Realme brand mobile phones, ensure OTG power supply is turned on in the settings (search for "OTG" and enable it) for normal use.
Troubleshooting Connection: If one of the two microphones is flashing and not connected, turn off the successfully connected microphone. Unplug the receiver, then turn on the microphone that has not been connected. Press and hold the switch for 8 seconds until it flashes quickly, then plug in the receiver. The connection should be successful. Avoid using excessive force when switching on and off.
Packing List
Content of packing:
- (1) Microphone transmitter
- (2) Receiver
- (3) Charging cable
- (4) User manual
Charging:
- Charging with Type-C cable: The red light goes out when it is fully charged.