DH Lifelabs Sciaire Mini + HEPA Air Purifier

QUICK START GUIDE | CAHP-20WC01

Welcome

We're saving some paper. View the full instruction manual online before use.

Need Help?

0300 373 0739

9 AM - 5 PM, Monday - Friday

https://dhlifelabs.co.uk/help-support/

CE UKCA

Dernier & Hamlyn Products Ltd. 201 Hollymoor Way, Rubery, Birmingham B31 5HE, United Kingdom

MADE IN CHINA

This product must not be disposed of with normal household waste. Recycle it responsibly by returning it to a designated collection point. Contact Customer Services on 0300 373 0739 or visit https://dhlifelabs.co.uk for recycling information.

The Sciaire Mini + HEPA uses PlasmaShield™ Technology, which generates positive and negative ions to remove 99.90% of bacteria and viruses in the air.

Your safety is important to us.

Please read the full instruction manual online and all safety instructions before you use the device.

WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY PLEASE ADHERE TO THE FOLLOWING:

This device complies with the maximum allowable concentration of ozone of 0.050 parts per million by volume (ppmv) in a 24 hour period.
Always place device on a firm, flat level surface that is secure. Do not place device where it is likely to be bumped or knocked over.
Do not sit, stand, or place heavy objects on the device.
The device must be in the upright position at all times.
NEVER place containers with liquid or drinks on top of the device. Spilling liquids into it can damage the device and potentially cause electric shock or create a fire hazard.
This device is not recommended for use by children under the age of 8, and children and vulnerable consumers should have adequate supervision or instruction when interacting with the device.
This device is intended for household and indoor use only. Do not use outdoors.
Only use the device after fully assembled.
Only use this device with supplied accessories.
Do not allow foreign objects to enter ventilation or exhaust opening as this may cause electric shock or damage to the device. Do not block air outlets or intakes.
Do not cover the device while in use.
For best performance, place the device on the floor at least 3 feet from any wall or device.
Always follow basic precautions when using device to reduce the risk of fire, electric shock, and personal injury.
Ensure the electrical outlet used with the device is not loose or damaged. A poor electrical connection can result in overheating and damage to the power cord.
To disconnect the device, make sure it is powered off, then grip the plug and pull it from the wall outlet. NEVER pull the cord to unplug it.
Do not use if the power cord or plug is damaged.
Keep the power cord away from hot surfaces.
Do not use if you believe the device has been damaged or is faulty. If the device is not working properly or has been dropped or damaged, contact customer support.
Do not route the power cord under or cover it with carpet. Route the power cord to minimize the possibility that someone could trip over it.
Do not expose the device to moisture: avoid areas where it might come in contact with water such as bathrooms or laundry rooms.
Disconnect all power to the device and turn off all controls before unplugging. Always unplug the device if not in use and while cleaning.
The device is not user serviceable. Do not attempt to repair the product yourself. In the event of failure, contact customer support for repair or replacement.
The input voltage is 100-240V, 50-60 Hz.
Only use with adaptor model HCX3601-2401500B provided with the device.

Read all safety instructions in this quick start guide, the online instruction manual, and on device.

Product Overview

1. Main Body
2. PlasmaShield™ Generators (Internal)
3. PlasmaShield™ Generators (Internal)
4. H13 True HEPA Filter
5. Bottom Cover
6. Power Cord

Note: The product image shows the main components of the Sciaire Mini + HEPA air purifier.

Quick Start Guide

Step 1: Detach Bottom Cover

Twist and detach the bottom cover.
Step 2: Install Filter

Remove the H13 HEPA filter from its plastic bag and install it in the device.
Step 3: Replace Bottom Cover

Replace the bottom cover.
Step 4: Power On

Connect the AC adapter to the device, plug into an outlet, and press the power button to turn on.

Control Panel

Timer

(2H/4H/8H) Set the timer to have the device turn off automatically.

Fan Speed

(1/2/3) Three fan speeds.

Sleep Mode

Lowest fan speed level that is ultra-quiet.

Plasma On/Off

Press the icon to toggle the plasma purification function on or off.

On/Off

Powers the device on and off.

Filter Replacement Indicator

After changing filter, press for 3 seconds to reset the filter life countdown.

Auto Mode

Air Quality Indicator Ring:

Blue: Air Quality Good
Yellow: Air Quality Moderate
Red: Air Quality Poor

The device automatically adjusts fan speed based on real-time air quality.

Real-Time Air Quality Indicator Ring

Blue

Good

Orange

Moderate

Red

Poor

Cleaning and Maintenance

Always unplug the device if not in use and while cleaning.

When the device is not used for an extended time, store it in a cool dry place. Do not store the device where it might be exposed to excess moisture or direct sunlight. May not operate effectively in freezing temperatures. Use a dry cloth to clean the exterior of the device. Do not use any chemicals or cleaners.

Cleaning the Air Quality Sensor

The inlet for the air quality sensor is located at the back of the device. The inlet should be cleaned every 2 months using a vacuum or with a cotton swab that has been lightly moistened with clean water.

Location: Air Quality Sensor inlet at the back of the device.