Niceboy ORYX M220 Gaming Mouse
Package Content
- Mouse Niceboy ORYX M220
- Manual
Overview
The mouse features a standard layout with numbered buttons:
- 1. Left button
- 2. Right button
- 3. Scrolling wheel
- 4. Forward button
- 5. Backward button
- 6. DPI button
A diagram shows the top and side views of the mouse with these buttons indicated by numbers.
Connection
After unpacking, connect the mouse via the USB connector to your computer. If the mouse is not recognized, check that your USB drivers are up-to-date.
Specifications
| Operating voltage | DC 5V ±5G, operating current: ≤ 100mA |
| Dimension | 121.5 * 62 * 39.21 mm |
| Max DPI | 4 200 DPI |
| DPI MODE | 800/1200/1600/2400/3200/4200 |
| Polling rate | 500 Hz |
| Key number | 6 |
| Sensor | Optical |
| Sensor movement speed | 48 IPS |
| Acceleration | 10G |
| Switch | Huano |
| Cord length | 1.8 m |
| Weight | 135g |
| Connectivity | USB |
Maintenance and Cleaning
The device requires minimal maintenance, but it is recommended to perform the following tasks once a month:
- Disconnect the mouse from the computer and use a dry or damp cloth in warm water to clean it from dirt.
- Use a round toothbrush or dampened ear swabs to clean the gaps.
- To clean the mouse optic, use only dry ear swabs to gently remove any dirt or dust particles.
Additional Information
- Avoid using the mouse in places exposed to too low or high temperatures (0 °C and below / 45 °C and above) or humidity (20 % and below / 90 % and above).
- Avoid storing the mouse in places exposed to too low or high temperatures (-20 °C and below / 60 °C and above) or humidity (90 % and above).
- Keep the product away from rain, moisture, or liquids.
- This product meets all the main requirements imposed by the EU Directives.
