Switch Joycon-x Game Controller User Manual

Introduction

Product model: Switch Joycon-x Bluetooth left and right joystick. Compatible console: Switch console. Compatible platform: Switch. Product brief: Joy-con is the standard controller for the Switch console. It can be connected to the console screen via a sliding rail and used wirelessly away from the console, functioning as a standard controller. In certain games, Joy-cons can be used as two individual controllers or as motion-sensing controllers held in hand. The Joy-con is equipped with motor vibration and a six-axis function. It supports local upgrade packages but not air upgrades.

The controller consists of a left and a right unit. The left unit features a directional pad (Up, Down, Left, Right), a 'Select' button, a 'Capture' button, and a left analog stick. The right unit features 'A', 'B', 'X', 'Y' buttons, a 'Home' button, '+', '-', 'SL', 'SR' buttons, and a right analog stick.

Product Indication Chart

• 1. Select button: Select
• 2. Left joystick: L3 (Press the button)
• 3. Direction button: Up, Down, Left, Right
• 4. Screenshot button: Capture ?
• 5. Start button: +
• 6. Action button: ABXY LR LZ RZ
• 7. Right joystick: L3 (Press the button)
• 8. Home button: HOME ?

Operation Guide

1. Direct to left and right joystick: Place the joystick right side up. The upper right of the left Joy-con has the '-' button, and the upper right of the right Joy-con has the '+' button.
2. Connect Joy-con to NS console: Place the side with the '+' and '-' buttons facing up. Slide the Joy-con from the top to the bottom along the sliding rail of the console screen until a click sound is heard.
3. Connect Joy-con to grip: This is the same process as connecting to the NS console. Slide the Joy-con from top to bottom along the grip's sliding rail until a click sound is heard. The grips connected to the Joy-cons will light up on either side of the NS icon.
4. Take Joy-con down from the device: Locate the "uninstall" button on the back of the Joy-con. Slide the Joy-con from the bottom to the top while holding the "uninstall" button until it is completely detached from the device.
5. Connect and use: Connect the left and right joysticks to either side of the console's sliding rail. The console icon will indicate the connection. One console can connect up to 10 control devices; one Joy-con counts as one control device. Joy-cons can be detached and used separately after a successful connection.
6. Back to connection mode: When a Joy-con is separated from the console, press any button on the Joy-con to wake it up; the four LEDs will flash. If they are not connected to the console for five seconds, they will enter sleep mode. When separated from the console, they can reconnect by pressing the "Home" button when the console is in sleep mode. If the main Joy-con attached to the console's sliding rail is in sleep mode, pressing the "Home" button will wake up the console.
7. About upgrade: The gamepad can be upgraded via USB cable without installing drivers (PC upgrade). It supports Windows XP/7/8.1/10. To upgrade, use the offline upgrade package on a PC, open the package, hold the 3D middle button of the gamepad, connect the gamepad to the PC via the sliding rail USB cable, and then click "DOWNLOAD".

Function of Button

• 1. Left joystick is consisted of: UP, DOWN, LEFT, RIGHT, Capture ?, -, L, LZ, SL, SYNC ⚙️, SR, and the Button left stick.
• 2. Right joystick is consisted of: A, B, X, Y, R, RZ, HOME ?, +, SR, SL, Reset, and the Right Stick.

Built-in Function

• 1. Equipped with motor vibration and six-axis function.

Electric Parameter

1. Charging indicator: Hang charging: When the Joy-con's power is too low, the console screen will show a low power warning. In this case, the Joy-con should be attached to the console for charging. The battery icon on the console screen will indicate power status during charging. When fully charged, the screen will go black.
2. Auto sleep: When the console screen is off, the Joy-con will go into sleep mode. When the console is in sleep mode, pressing the "HOME" button on the gamepad will wake up the console.

• Sleep electricity: <15uA
• Working electricity: <20mA
• Working voltage: 3.0V
• Input voltage: DC 4.5~5.5V
• Charging electricity: 147mA

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.