DoorBird D11x Series IP Video Door Station

Installation Manual

This document provides detailed instructions for the installation of the DoorBird D11x Series IP Video Door Station. It covers all essential steps from initial setup to final configuration, ensuring a smooth and efficient installation process.

For the most up-to-date version of this manual, please visit www.doorbird.com/support.

Key Features and Components

The DoorBird D11x Series offers advanced features for home security and communication. Key components typically include:

• Main Electrical Unit with call button(s) and front panel
• Back-housing with wall-mounting bracket
• Drilling template
• Installation manual and Quickstart guide
• Power supply unit (mains adapter)
• RJ45 Adapter
• Screw connection terminal plug

Various models are available, including those with single or dual call buttons, a keypad module, or a fingerprint reader, each with specific front and internal component layouts detailed within this manual.

Important Safety and Installation Guidelines

Safety First:

• Always ensure power is switched off before beginning installation.
• Installation and servicing should be performed by qualified personnel.
• Avoid direct sunlight exposure on the device and its image sensor.
• Do not open the device, as this voids the warranty.
• Keep packing materials away from children.

Installation Considerations:

• Determine the optimal assembly location, considering viewing angles and lighting conditions. The camera lens should be at least 145 cm (57 in) high.
• Ensure proper sealing against moisture, especially for flush-mounted installations.
• Use appropriate tools and avoid excessive force during installation.
• For network connection, a wired Ethernet connection is recommended for optimal stability.
• Ensure your internet connection meets the minimum speed requirements (at least 0.5 Mbps upload speed).
• Use only the provided power supply unit or approved alternatives.

Network and Power Options

The DoorBird D11x can be connected via a network cable (recommended) or WiFi (2.4 GHz, for specific models). Power can be supplied via the included mains adapter, a PoE-Switch/Injector, or a DIN rail power supply unit.

For detailed information on network setup and power options, including PoE compatibility (IEEE 802.3af Mode A), refer to the relevant sections within this manual.

Troubleshooting and Support

If the device does not operate properly, unplug the power supply and consult the manual or contact DoorBird support.

For video tutorials and further assistance, visit www.doorbird.com/support.

Disposal Information

Please follow local regulations for the disposal of electronic waste. Do not mix with general household waste.