AVer CAM540 Conference Camera Quick Start Guide

Package Contents

The package includes the following items:

• Camera: A compact, pan-tilt-zoom (PTZ) camera unit.
• Remote controller: A handheld remote with numerous buttons for camera control.
• AAA Batteries: Two AAA batteries are required for the remote controller.
• Power Adapter: Includes a power adapter and a wall plug (plug type varies by country).
• USB Cable: A cable for connecting the camera to a computer.
• L-Mount Bracket: A bracket for mounting the camera.
• Screws for mount: Fasteners to secure the bracket.
• Quick Guide: This document provides initial setup instructions.
• Warranty card: Document detailing warranty information.
• USB type-A to type-C adapter: An adapter for connecting to computers with USB Type-C ports.

Overview of Components

The camera unit features the following ports and indicators:

• (1) IR sensor: Infrared receiver, typically located on the front for the remote control.
• (2) Power port: Located on the back, for connecting the power adapter.
• (3) RS232 port: Located on the back, used for serial communication and control.
• (4) USB port: Located on the back, for connecting the camera to a computer.
• (5) Restart button: A small button, usually recessed, used to restart the device.
• (6) Kensington Lock: A security slot for anti-theft devices.
• (7) Screw hole for mounting: Located on the base of the camera for attachment to mounts.

Installation

Follow these steps to install the camera:

Connecting Power and Computer

1. Connect the power adapter to the camera's power port and then plug it into a wall outlet.
2. Connect the camera to your computer using the provided USB cable. If your computer has a USB Type-C port, use the included USB type-A to type-C adapter to connect the camera.
3. Ensure all cables are securely connected to the camera before proceeding with mounting or securing them.

Mounting Options

The camera can be mounted in several ways:

Wall Mount Installation

The diagrams illustrate the process of attaching the camera to a wall. This involves securing the L-mount bracket to the wall using screws, and then attaching the camera to the bracket. Key dimensions for wall mounting are approximately 97.5mm (3.84 inches) and 58mm (2.28 inches) for screw hole spacing, with screw hole diameters of Ø5.5mm (Ø0.22 inches).

Ceiling Mount/Switch Box Installation

The diagrams show how to mount the camera to a ceiling structure or a standard switch box using appropriate brackets and screws.

Remote Controller

The remote controller provides access to various camera functions:

• Camera Select (1, 2, 3): Switch between saved camera presets.
• Camera Directional Control: Arrow keys for panning and tilting the camera.
• Line In: Audio input connection.
• SmartFraming: Automatically frames subjects. Can be toggled between automatic and manual modes by pressing and holding for 1 second.
• Zoom In/Out: Adjusts the camera's zoom level.
• Preset: Buttons to save or recall specific camera positions.
• Brightness: Controls the image brightness (Brightness -, Brightness +).
• Call/Answer: Initiates or answers video calls.
• Enter: Confirms selections.
• Mute/Un-mute: Mutes or unmutes the microphone.
• Volume Up/Down: Adjusts the audio volume.
• Preset Hot key: Quick access to programmed preset positions.
• Preset Position: Buttons to set specific preset locations.
• Hang up: Ends video calls.

Note: Some advanced functions require the AVer PTZApp. The CAM540 model may not support all remote functions. The remote controller requires two AAA batteries.

Making a Video Call

To use the CAM540 for video calls, a computer is required:

1. Open your preferred video collaboration application, such as Skype™, Skype for Business, Google Hangouts™, ZOOM™, WebEx™, Adobe Connect™, WebRTC, TrueConf, V-Cube, U-meeting, Ringcentral, BlueJeans, or Fuze.
2. In your application's settings, set the CAM540 as the primary camera device. Consult your application's setup guide for specific instructions.
3. You are now ready to make a video call.

The CAM540 is a Plug-n-Play conference camera, meaning no special drivers are typically needed for basic operation. For advanced settings and firmware updates, download the AVer PTZApp from www.aver.com/download-center.

Compliance and Support

Federal Communications Commission (FCC) Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Copyright: ©2019 AVer Information Inc. All rights reserved.

Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries in a safe and proper manner.

For FAQs, technical support, software, and user manual downloads, please visit: www.aver.com.

Contact Information:

• AVer Information Inc.
• Website: www.aver.com
• Address: 8F, No.157, Da-An Rd., Tucheng Dist., New Taipei City, Taiwan
• Tel: +886-2-2269-8535

• AVer Information Inc. Europe B.V.
• Address: Westblaak 140, 3012KM, Rotterdam, Netherland
• Tel: +31(0)10 7600 550
• Technical support: EU.RMA@aver.com