BuTure VC40 Cordless Vacuum Cleaner

1. WARNINGS

Thank you for purchasing the BuTure VC40 cordless vacuum cleaner. Before using this machine, please read the following safety warnings.

• This BuTure appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless they have been supervised or instructed by a responsible person regarding the use of the appliance to ensure they can use it safely.
• Suitable for dry locations only. Do not use or store outdoors on wet surfaces. Do not handle any part of the plug or appliance with wet hands.
• Do not use a damaged cord or plug. If the device or charger malfunctions, has been dropped, damaged, lost, or fallen into water, contact tech-support@ibuture.com, the BuTure after-sales team for assistance.
• Do not vacuum flammable or combustible liquids, such as gasoline, nor use in areas where liquids may be present.
• Turn off the power switch before connecting or disconnecting the adapter.
• Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without filters or dust cup to avoid damaging the motor and contaminating the air. Wash your hands after using the vacuum cleaner.
• ? FIRE WARNING - Do not place this product on or near a stove or any other hot surface, and do not incinerate this appliance even if severely damaged. The battery may catch fire or explode.
• Unplug the charger from the power outlet before performing cleaning or routine maintenance.
• In extreme conditions, battery leakage may occur. If liquid comes into contact with skin, wash quickly with soap and water. If liquid comes into contact with eyes, rinse immediately with water for at least 15 minutes. Seek medical attention immediately.
• Charge the unit with the charger we provided.
• Avoid using this product to vacuum hard and sharp objects, as this may cause damage.

Note: The vacuum cleaner has adopted thermal protection technology to prevent overheating; it will stop working when the item is overheated.

2. PACKAGE CONTENTS

Please check and confirm the accessories and parts according to the following list before use.

3. KNOW YOUR PRODUCT

3.1 Product Details

Diagram Description: The diagram shows the main components of the vacuum cleaner. Key parts labeled include:

• Air Outlet
• Dust Cup
• Dust Release Button
• LED Light
• Digital Display
• ON/OFF Button
• Battery Pack
• Charging Port
• Battery Release Button
• Telescopic Tube Release Button
• Dust Cup Release Button
• Adjustable Extension Tube
• Length Adjustment Button
• Motorized Head
• Motorized Head Release Button

Visual representation of the vacuum cleaner components.

3.2 Digital Display Screen

The digital display provides real-time information about the vacuum cleaner's status. Key indicators include:

• Clean dustbin indicator: Alerts the user to empty the dustbin.
• Battery residual charge indicator: Shows the remaining battery percentage.
• Suction adjustment button: Allows users to cycle through suction modes (Min, Mid, Max).
• Brush block indicator: Alerts if the brush is blocked.
• Charging indicator: Shows charging status.
• Suction level indicator: Displays the current suction mode (Min, Mid, Max).

Circular digital display showing various operational indicators.

3.3 Introduction to Accessory Functions

2-in-1 Upholstery Brush: Helps remove dust and hair from carpets.

Long Crevice Nozzle: Removes dust from hard-to-reach areas like window sills, bed legs, and sofa gaps.

Wall Mount Plate: Allows the vacuum cleaner and accessories to be stored on the wall for easy access and battery charging.

Mini Cleaning Brush: Used to remove hair, debris, and micro-dust from accessories or filters.

Multi-function Rotating Brush: Removes dust, debris, and hair from all types of floors, carpets, and upholstery.

Bed Brush: Removes mites, hair, and dust from sheets and mattresses.

Illustrations of various cleaning accessories.

4. PRODUCT ASSEMBLY

4.1 Install the Vacuum Cleaner

4.1.1 Directly Install Cleaning Accessories

Diagram Description: Shows how to directly attach cleaning accessories to the main body of the vacuum cleaner with a "Click" sound indicating secure attachment.

Illustration of attaching accessories directly to the vacuum body.

4.1.2 Install the Extension Tube and Cleaning Accessories

Press and hold the length adjustment button on the extension tube, then push forward or pull back to select the appropriate extension tube length.

Diagram showing the extension tube and its length adjustment mechanism.

4.2 Install the Wall Mount

Diagram Description: Step 1 shows how to position the wall mount. Step 2 shows how to attach the vacuum cleaner to the mounted bracket.

Illustrations for mounting the wall bracket and attaching the vacuum.

⚠️ WARNING

• Please ensure there are no gas, water, or electrical cables behind the mounting area.
• To prevent the dock from falling, ensure it is installed securely.
• Store properly indoors in a dry place. Do not expose the machine to sunlight or freezing temperatures. Recommended temperature range: 39.2°F (4°C) - 104°F (40°C).

5. HOW TO USE

5.1 Charging

? Before first use, or after a long storage period, fully charge the battery.

? When storing and not using the vacuum cleaner for a long period, ensure it is charged and discharged at least once every three months.

Charging Methods:

i. Connect to the main body for charging.

Illustration showing the main unit connected to a charger.

ii. Hang on the wall mount for charging.

Illustration showing the vacuum cleaner mounted on the wall bracket and charging.

iii. Charge the battery directly.

Diagram Description: Shows the battery pack being charged separately. A flashing blue light indicates charging, and a solid blue light indicates a full charge.

Illustration of direct battery charging with indicator lights.

5.2 Operation

Before each use, ensure that:

• The battery is fully charged and securely in place.
• The dust cup and filters are clean and properly installed.

Start Working

Press the power button to turn it on; it will start in medium suction mode. Press again to turn it off.

Illustration showing the power button and internal mechanism.

Adjust Suction Level (Min→Mid→Max)

Press the power button to turn it on, starting in minimum mode. Press to switch to medium mode. Press again to adjust to maximum mode.

Visuals of the digital display showing Min, Mid, and Max suction levels.

6. MAINTENANCE

Tip: Please clean it regularly to prolong the life of the vacuum cleaner.

6.1 Cleaning the Main Body

• Turn off the power before cleaning the body.
• Use a neutral detergent and clean the body with a slightly damp cloth.
• Please avoid exposure to the sun and store in a cool, dry place.

6.2 Empty the Dust Cup

During use, if the debris in the dust cup exceeds the MAX line, empty it promptly.

Diagram Description: Shows the dust cup with a "X MAX" indicator for overfilled and "MAX" indicator for correctly filled.

Illustration showing dust cup emptying process with MAX indicators.

Press the dust release button to empty the dust.

Illustration of pressing the dust release button.

6.3 Wash the Dust Cup and Filters

• Remove the dust container from the main body. Press the dust container release button on the main body, then detach the dust container.
• Remove the filters from the dust container. First, lift the sponge filter, then lift the entire cyclone filter assembly, including the multi-cone filter. Finally, rotate the multi-cone filter counter-clockwise to separate it from the cyclone filter.
• Remove the HEPA filter from the main body.

Diagrams illustrating the removal of the dust cup and filters.

Clean the dust cup and filters with water. Ensure the dust container and filters are completely dry before use.

Illustration showing filters being washed and dried (1 min wash, 24h dry).

Install the multi-cone filter and HEPA filter clockwise, aligning the clips to install the cyclone filter. Then, install the sponge filter and the dust container.

Diagrams showing the reassembly of filters and dust cup.

6.4 Cleaning the Rotating Brush

Suggestion: After prolonged use, bristles may become entangled with hair or similar debris. It is recommended to periodically clean the brush roller to ensure efficient operation and maintain suction power.

Press the button marked "unlock" to remove the rotating brush.

Illustration of releasing the rotating brush.

Remove debris wrapped around the roller using the mini cleaning brush, then rinse the roller with water.

Illustration of cleaning the brush roller with the mini brush and rinsing.

Gently push the brush roller back into the motorized brush head until it is securely in place. Ensure the brush roller is completely dry before use.

Illustration showing the brush roller being reinserted and drying (24h drying symbol).

7. SPECIFICATIONS

8. TROUBLESHOOTING

9. WARRANTY

9.1 2-Year Limited Warranty

• Your BuTure machine has a 2-year warranty against original defects in material and workmanship, provided it is used for private domestic purposes in accordance with the BuTure instruction manual.
• This warranty provides, at no additional cost, all labor and parts necessary to ensure the machine is in proper working condition during the warranty period.

9.2 What is Covered?

Applies only to purchases made from authorized BuTure retailers. This warranty will be valid only if the machine is used in the country where it was sold.

9.3 How to Claim?

Please retain your proof of purchase. To make a claim under our Limited Warranty, you must provide the original purchase receipt with the date of purchase and order number.

If your machine is not functioning correctly or you still have questions after carefully reading this manual, please do not hesitate to contact us; we will do our best to provide you with a satisfactory solution.

After-sales Service Email: tech-support@ibuture.com

Federal Communication Commission Interference Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Correct Disposal of this product

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Symbol indicating proper disposal of electronic waste.

Declaration of Conformity

We (Manufacturer is responsible for this declaration)

Ekoo Electronic Co.,Ltd.

(Company name)

B09, block B, f2, bldg. b, runfeng Pioneer Park, no.973, minzhi Avenue, Minzhi St., Longhua, Shenzhen, CN.(Company address)

Declare under our sole responsibility that the product:

Trade name: BUTURE
Equipment: Vacuum Cleaner
Model No.: VC40

To which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to LVD Directive(2014/35/EU) & EMC Directive(2014/30/EU) & RoHS(2011/65/EU) product is responsible to affix CE marking, the following standards were applied:

• EN 60335-2-2:2010+A11:2012+A1:2013
• EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019
• EN 62233:2008
• EN 55014-1:2021
• EN 55014-2:2021
• EN IEC 61000-3-2:2019+A1:2021
• EN 61000-3-3:2013+A2019
• IEC62321-3-1:2013
• IEC62321-4:2013
• IEC62321-5:2013
• IEC62321-6:2015
• IEC62321-7-1:2015
• IEC62321-7-2:2017
• IEC62321-8:2017

Full Name: George.wang
Signature: George.wang

Position: Approbation Manager
Place/Date: Shenzhen, China/Jan.24-2022