Low Prices in Electronics, Books, Sports Equipment & more
Enshine Home
Support
User Manual for ENSHINE models including: GU10, Smart Bulb, GU10 Smart Bulb
User Manual ENSHINE Smart Bulb. GET READY CAUTION USE IN DRY LOCATIONS. RISK OF ELECTRIC SHOCK OR BURNS ... smartLife-xxx network Go back to the smart life app, and it will try to connect the bulb Disable Bluetooth on the phone Connect via WIFI AP MODE (ONE at a me) 09 1 2 3 1. Tap a smart bulb in
User Manual ENSHINE Smart Bulb. GET READY CAUTION USE IN DRY LOCATIONS. RISK OF ELECTRIC SHOCK OR BURNS ... smartLife-xxx network Go back to the smart life app, and ...
User Manual. ENSHINE Smart Bulb ... ASUS, D-LINK-TP-LINK, please visit FAQ & Feedback on the app for more informa on. ENSHINE products need to be connected ...
File Info : application/pdf, 17 Pages, 5.36MB
DocumentDocumentENSHINE Smart Bulb User Manual CAUTION USE IN DRY LOCATIONS. RISK OF ELECTRIC SHOCK OR BURNS For indoor use only. Do not install the device with wet hands or when standing on wet or damp surfaces. Not for use in totally half or fully enclosed luminaires, especially luminaires with metal shade, which may distort the signal and make it harder to connect or control the lights Do not use with Dimmers! GET READY iOS 10.0 & up Android 4.4& up 2.4Ghz 01 Instrucon video Customer Service Amazon messaging service 1.Search for ENSHINE amazon.co.uk ENSHINE 2. Find our store ( click any of ENSHINE product detail page) Sold by Enshine lighting and Fulfilled by Amazon. 3. Tap Ask a queson Have a question for Ask a Enshine lighting? queson Email: support@enshinelighng.com WhatsApp: +86-13385928198 hps: //enshinehome.com/support/ 02 1.Download the `Smart Life' App. Register or log in if you already have an account 2.Add device **If the light won't blink slowly or quickly, turn it off/on 10 mes with intervals of at least 2s to reset it** Connect via Bluetooth (ONE at a me 03 Connect via Bluetooth (ONE at a me ENSHINE 04 Connect via WIFI EZ MODE (one and more at a me) Disable Bluetooth on the phone 1 2 4 Tap "+" symbol Select Lighng Enter your ==> Lighng source(Wi-Fi) Wi-Fi password 05 Connect via WIFI EZ MODE (one and more at a me) Disable Bluetooth on the phone Reset the bulb then confirm and Tap `Next' The app will try to connect the smart bulbs 06 Connect via WIFI AP MODE (ONE at a me) Disable Bluetooth on the phone AP Mode Choose AP Mode Tap `go to connect' 07 Connect via WIFI AP MODE (ONE at a me) Disable Bluetooth on the phone Connect to the smartLife-xxx network Go back to the smart life app, and it will try to connect the bulb 08 Group Control 1. Tap a smart bulb in 2. Tap the edit icon 3. Click ' Create Group ' the device list to enter the its control panel. 2 1 3 09 Group Control 4. Select devices for unified management. 5. Tape `confirm' to complete the setup. 5 6 4 Now, you can use group control to control mulple bulbs 10 Alexa Sengs Enable the Smart Life skills in the Alexa APP, then log in your Smart Life account, it will automacally sync your smart bulb to Alexa. Aer the synchronizaon is successful, you can use voice commands to control your smart bulbs. 11 Google Assistant Sengs Tap `Add' - `Set up device' - `Have something already set up?' search for `Smart Life' to add it and log in your smart life account. 1 2 4 5 3 12 Frequently Asked Quesons 1. What should I do when my device fails to connect to the network? --Check whether the router password you entered is correct. --Ensure that broadcasng is enabled for Wi-Fi and is not hidden. Ensure that your device has been added over a Wi-Fi band of 2.4 GHz. (Check whether the 2.4 GHz band and 5GHz band share the same Wi-Fi account. If so, we recommend that you configure two accounts and switch to the 2.4 GHz band during network connecon.) --Ensure that the network environment has strong and stable signals. Troubleshoong: Place your mobile phone or iPad connected to the same local area network close to the device, and open a web page to check whether the browsing is smooth and stable. --If the network is normal but the device network connecon sll fails, check whether the router is overloaded. You can disable a device's Wi-Fi feature to reserve the channel for resource reallocaon. --If wireless MAC address filtering is enabled for the router, remove your device from the router's MAC address filtering list to ensure that it is allowed to connect to the network. You can also disable MAC address filtering. If your device sll fails to connect to the network aer the preceding steps, please contact support@enshinelighng.com to let us troubleshoot this issue 13 2. The light changed from flashing to regular, but it sll fails to connect? --Please check if the Wi-Fi password you entered during network configuraon is correct. --Please keep the distance to the router during the network configuraon (within 1 ~ 5 meters, there must be no metal spacers in the middle) --The smart device that your router's CPU can load has reached the upper limit. Please disconnect some devices and try again. --The device does not reset aer the network configuraon fails. You can try the network configuraon again aer the device is reset. 3. My smart bulb was disconnected, how can I reset it? EZ Mode: --Make sure the device is powered off for more than 10 seconds before powering on the device. --Turn on and off three mes (on-off-on-off-on) power of the device (2 to 4 seconds between each on and off). Wait a few moments unl the lighng starts blinking rapidly. AP Mode: --No need to power down the device, but need to keep the lighng device blinking rapidly. Then turn on and off three mes (on-off-on-off-on) power of the device (2 to 4 seconds between each on and off). Wait a few moments unl the lighng starts blinking slowly. 14 4. How to configure separate WI-FI SSIDs for 2.4GHz and 5GHz? If your router supports both the 2.4 GHz and 5 GHz bands, but only one Wi-Fi name is displayed on the Wi-Fi search page of your mobile phone, perform these steps: --Go to the Wireless page of the router. (The entry address is usually provided on the label aached to the back of the router). --Go to the 2.4 GHz seng page, and set the Wi-Fi name (SSID) to cXXX-2.4G, where xxx indicates the Wi-Fi name. Save seng. --Go to the 5 GHz seng page, and set the Wi-Fi name (SSID) to cXXX-5G, where xxx indicates the Wi-Fi name. Save seng. --When the preceding sengs are complete, the new Wi-Fi names will appear on the Wi-Fi sengs page of your mobile phone. Note: Aer the Wi-Fi names are changed, you need to reconnect the devices that use this wireless router. The password remains the same if it has not been changed. To configure the routers of some popular brands like Netgear, ASUS, D-LINK-TP-LINK, please visit FAQ & Feedback on the app for more informaon. 5. If my Wi-Fi/Internet goes down, will ENSHINE smart bulbs sll work? ENSHINE products need to be connected to Wi-Fi in order to use them remotely. 15 6. Can I share with family and friends? Yes, you can share your bulbs with family and friends who will have access to control your bulbs. In the Smart Life app, press the Profile buon and click on the `Share Device' buon, and you will be able to give or revoke sharing permissions.In order to share, the other user should already have downloaded the Smart Life app and registered a new account. 7. The bulb appears offline or unreachable, what should I do? Check the light switch and make sure that it is switched ON. The light bulb requires an `always-on' power supply to operate properly. Make sure your Wi-Fi router is online and in range. When you change the Wi-Fi password, the bulb will disconnect, you can turn on-off 10 mes to reset and reconnect it. 8. What's the Wireless Range? The range of your home Wi-Fi is heavily dependent on your home router and the condions of the room. Check with your router specificaons for exact range data. For more information, please visit ENSHINEHOME.COM 16