KOORUI VESA Holder Installation & Attention
Installation & Attention
- VESA device can be purchased separately.
- Refer to the user guide provided with your VESA device for details.
A close-up view of a VESA mounting bracket being attached to a monitor arm, with screws clearly visible. Text on the image states: 'Assembled the VESA screws'.
The rear view of a KOORUI monitor showing the standard VESA mounting pattern. Text on the image indicates: 'VESA support 75x75mm'.
- Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the product on a slanted wall, it may fall and result in severe personal injury.
- Do not mount the product at more than a 15 degree tilt.
- Assemble VESA holder (using retaining screws removed from rear shell).
- Wall mounting screws require M4 screws, the length should not exceed 7mm.
Holder Removal
- VESA Holder removal
The VESA mounting plate being detached from the back of a monitor, with screws being removed. Text on the image reads: 'Removed the VESA screws'.
