Instruction Manual for ETHAN ALLEN models including: 096099 GLD Piper Table Lamp, 096099 GLD, Piper Table Lamp, Table Lamp, Lamp
Piper Lamp | Modern Gold Lamp | Ethan Allen
Piper Table Lamp Assembly Instructions 096099 GLD IMPORTANT SAFETY INSTRUCTIONS TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY: This lighting fixture is for indoor use only. This lamp is equipped with a polarized plug. One plug blade is wider than the other. DO NOT MODIFY the plug or power cord in any way. DO NOT EXCEED the recommended bulb wattage. Use only the type of bulb specified. Keep flammable materials away from the bulb. DO NOT OPEN the product or alter the wiring in any manner. If using an extension cord, follow precautions provided with the power cord. Use care when unpacking. Locate ALL THE PARTS INCLUDED before disposing of packaging materials. Remove the silica gel packet from the socket before plugging the lamp into an outlet. ASSEMBLY, CARE, AND TROUBLESHOOTING No tools required for assembly Light bulb is not included Parts Included: (Refer to the Figure) A. Finial B. Shade C. Harp D. Socket and Saddle E. Plug Cap Assembly Procedure: (Refer to the Figure) 1. Install the Harp (C) onto the Saddle (D) 2. Install the Shade (B) into the Harp (C) 3. Install the Finial (A) onto the Harp (C) 4. Install the bulb onto Socket (D) 5. Remove the Plug Cap (E) Caring for and cleaning your lamp: 1. Wipe with a soft, dry cloth. 2. Avoid cleaners, scouring pads, etc., as these may cause damage to the lamp finish. 3. Before changing bulb, unplug the lamp and allow the bulb to cool first. Troubleshooting: Problem: Bulb does not light Possible cause: Bulb is burnt or damaged Power to lamp is off Lamp is not plugged in Correction: Replace bulb Confirm power is on Confirm lamp is plugged in If the fixture still does not work after troubleshooting, please contact your local Ethan Allen Design Center. SAVE THESE INSTRUCTIONS ©2018 Ethan Allen Global, Inc. Page 1 of 1Microsoft Word 2016 www.ilovepdf.com