Radiated and Conducted Measurement Photos

Radiated Measurement Photos

The first set of photos illustrates the radiated measurement setup within an anechoic chamber. The chamber features sound-absorbing foam panels on its walls. A device, identified as potentially a mobile phone displaying "22:09", is positioned on a table. A measurement antenna is set up nearby. The "NTEK" logo is visible on the chamber's interior.

Image 1: Device on a table in an anechoic chamber during radiated testing.

The second image in this series shows a similar radiated measurement environment. In this setup, the device is placed on top of a white, protective-wrapped box. The "NTEK" logo is again visible.

Image 2: Device placed on a wrapped box in an anechoic chamber during radiated testing.

Conducted Measurement Photos

These photos depict the conducted measurement setup. A smartphone is connected via cables to a power adapter and a piece of test equipment. The test equipment is linked to a power source. A label in the background reads "测试电压", which translates from Chinese to "Test Voltage".

Image 3: Smartphone, power adapter, and test equipment setup for conducted measurements, with a "Test Voltage" label visible.

	DOOGEE TABE3MAX Tablet RF Performance Test Report Comprehensive radio frequency (RF) performance test results for the DOOGEE TABE3MAX tablet, covering conducted power, peak-to-average ratio, bandwidth, band edge, and spurious emissions, as performed by Shenzhen DOOGEE Hengtong Technology CO.,LTD.
	DOOGEE TABE3MAX Tablet RF Performance Test Report: Radiated Power, Peak-to-Average Ratio, and Spurious Emissions Detailed RF performance test results for the DOOGEE TABE3MAX Tablet, covering Effective (Isotropic) Radiated Power, Peak-to-Average Ratio (CCDF), Conducted Spurious Emissions, and Band Edge measurements for LTE Band 41.
	DOOGEE User Manual User manual for DOOGEE products, providing important safety information, operating instructions, and regulatory compliance details.
	FCC Test Report for DOOGEE V20 Smart Phone This FCC test report details the electromagnetic compatibility (EMC) testing conducted for the DOOGEE V20 Smart Phone, including conducted and radiated emission tests, confirming compliance with FCC Part 15B standards.
	DOOGEE DK10 Smart Phone FCC Certification Test Report This report details the FCC certification test results for the DOOGEE DK10 Smart Phone, covering FCC CFR47 Parts 22H, 24E, and 27, conducted by Shenzhen NTEK Testing Technology Co., Ltd.
	DOOGEE TABE3MAX RF Test Report: Conducted Power, Bandwidth, and Emissions This document presents comprehensive radio frequency (RF) test results for the DOOGEE TABE3MAX tablet, detailing conducted power, peak-to-average ratio, bandwidth measurements, band edge compliance, and conducted spurious emissions.
	DOOGEE U11 Tablet FCC Radio Test Report - RF Emissions Compliance Official FCC Radio Test Report for the DOOGEE U11 Tablet, detailing RF emissions testing, bandwidth, output power, and spectral density compliance according to FCC Part 15 Subpart C.
	TIRT Testing Report for DOOGEE U7 Tablet - RF Test Results This report details the RF testing conducted on the DOOGEE U7 Tablet (Models U7, U7 Kid, U7 Pro, U7S, U7 SE, U7 Ultra, U7 Max, U7E) by TIRT, covering conducted emissions, spurious emissions, bandwidth, output power, and more, according to FCC Part 15 standards and ANSI C63.10:2013.

Radiated Measurement Photos

Conducted Measurement Photos

Related Documents