Kensington VeriMark Guard: Windows 11 Setup Guide

Setting up your VeriMark Guard with Windows 11

1. Click on 'Start' on the taskbar and then click on 'Settings'.
2. In the Settings window, click on 'Accounts' to view sign-in options.
3. Click on 'Sign-in options' to access various sign-in methods.
4. Alternatively, click the magnifier glass on the taskbar and search for "Set up security key". Select the matching result.
5. Click on 'Security Key' and then 'Manage'.
6. Under 'Manage', touch the USB dongle to access features.
7. If this is your first time using a security key, you will need to add a security PIN. Click 'Add' under 'Security Key PIN'.
8. Enter your security key PIN and click 'OK' to proceed.
9. Once the PIN is entered, you will be prompted to set up your fingerprint. Click 'Set up' on the 'Security Key Fingerprint' option.
10. Touch the fingerprint sensor area repeatedly. Lift and rest your finger on the sensor on the top of your device until setup is complete.
11. Click 'Done' to finish fingerprint enrollment or 'Add another finger' to set up an additional fingerprint.
12. On the main window, you can also add another fingerprint or remove the existing fingerprint, as well as change the PIN.
13. To reset the USB dongle and erase all fingerprints, click on 'Reset Security Key'.
14. Click 'Proceed' and follow the on-screen instructions to reset the USB dongle.
15. Disconnect and reconnect the USB dongle.
16. Touch the security key twice within 10 seconds.
17. Click 'Done' to finish the reset process.