LINAK DS1 Desk Sensor User Manual

User Manual for LINAK models including: Desk SensorTM 1, DS1, DS1 Desk Sensor, Desk Sensor, Sensor

Standing Desks Australia (Sit Stand Desks) & TV Lifts from Ergomotion

File Info : application/pdf, 20 Pages, 521.71KB

edesk-Sensor-1-User-Manual

Desk SensorTM 1
User manual

LINAK.COM/DESKLINE

Page 1 of 20

Contents
Preface.............................................................................................................................................. 3 Important information .................................................................................................................. 4 Safety instructions ......................................................................................................................... 4 Only for EU markets....................................................................................................................... 5 Only for Non EU markets .............................................................................................................. 5 Misuse .............................................................................................................................................5 Informations importantes ............................................................................................................. 6 Consignes de sécurité.................................................................................................................... 6 Seulement pour les marchés au sein de l´UE .............................................................................. 7 Seulement pour les marchés hors UE .......................................................................................... 7 Utilisation abusive ......................................................................................................................... 7 Repairs ............................................................................................................................................ 8 Manufacturer's declaration........................................................................................................... 8 Declaration of Conformity ........................................................................................................... 9 Misc. on the DESKLINE® system ................................................................................................. 10
Warranty................................................................................................................................... 10 Maintenance............................................................................................................................. 10 Valid for......................................................................................................................................... 11 Installation ................................................................................................................................... 12 System with Control Box CBD6S................................................................................................ 12 System with IC columns ............................................................................................................ 12 Method of operation ....................................................................................................................14 Disposal of LINAK products ....................................................................................................... 15 Drawing appendix ....................................................................................................................... 16 Label ........................................................................................................................................... 17 LINAK application policy ............................................................................................................ 18 Addresses ..................................................................................................................................... 20
Page 2 of 20

Preface
Dear User, We are delighted that you have chosen a product from LINAK®. LINAK systems are high-tech products based on many years of experience in the manufacture and development of actuators, electric control boxes, controls and chargers. This User Manual does not address the end-user. It is intended as a source of information for the manufacturer of the equipment or system only, and it will tell you how to install, use and maintain your LINAK electronics. It is the responsibility of the manufacturer of the end-use product to provide a User Manual where relevant safety information from this manual is passed on to the end-user. We are sure that your LINAK product will give you many years of problem-free operation. Before our products leave the factory they undergo full function and quality testing. Should you nevertheless experience problems with your systems, you are always welcome to contact your local dealer. LINAK subsidiaries and some distributors situated all over the world have authorised service centres, which are always ready to help you. LINAK provides a warranty on all its products. This warranty, however, is subject to correct use in accordance with the specifications, maintenance being done correctly and any repairs being carried out at a service centre, which is authorised to repair LINAK products. Changes in installation and use of LINAK systems can affect their operation and durability. The products are not to be opened by unauthorised personnel. The User Manual has been written based on of our present technical knowledge. We are constantly working on updating the information and we therefore reserve the right to carry out technical modifications. LINAK A/S
Page 3 of 20

Important information Important information on LINAK® products can be found under the following headings:
Warning! Failure to comply with these instructions may result in accidents involving serious personal injury. Failing to follow these instructions can result in the product being damaged or being destroyed.
Safety instruction
General Safe use of the system is possible only when the operating instructions are read completely and the instructions contained are strictly observed. Failure to comply with instructions marked with the "NOTE" symbol may result in serious damage to the system or one of its components.
It is important for everyone who is to connect, install, or use the systems to have the necessary information and access to this User Manual. Follow the instructions for mounting risk of injury if these instructions are not followed. The appliance is not intended for use by young children or infirm persons without supervision. If there is visible damage on the product it must not be installed. Note that during construction of applications, in which the actuator is to be fitted, there must be no possibility of personal injury, for example the squeezing of fingers or arms. Assure free space for movement of application in both directions to avoid blockade.
Page 4 of 20

Only for EU markets This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Only for Non EU markets Persons who do not have the necessary experience or knowledge of the product/ products must not use the product/products. Besides, persons with reduced physical, sensory or mental abilities must not use the product/products, unless they are under surveillance or they have been thoroughly instructed in the use of the apparatus by a person who is responsible for the safety of these persons. Moreover, children must be under surveillance to ensure that they do not play with the product.
Misuse Do not overload the actuators this can cause danger of personal injury and damage to the system. Do not use the actuator system for lifting persons. Do not sit or stand on a table while operating risk of personal injury. Do not use the system in environments other than the intended indoor use.
Page 5 of 20

Informations importantes Les informations importantes sur les produits LINAK® peuvent être trouvées dans les rubriques suivantes:
Attention! Le non respect de ces instructions peut entraîner des accidents impliquant des blessures graves. Ne pas suivre ces instructions peut entraîner l´endommagement ou destruction du produit.
Consignes de sécurité
Géneral Le non respect de ces instructions peut entraîner des accidents impliquant des blessures graves. Ne pas suivre ces instructions peut entraîner l´endommagement ou destruction du produit. L´utilisation en toute sécurité du système n´est possible que si l´intégralité des instructions ont été lues et ont été strictement suivies.
Le non respect de se conformer aux instructions marquées du symbole "note" peut entraîner de graves dommages au système ou à un de ses composants. Il est important pour tout individu qui connecte, installe, ou utilise le système d´avoir les informations nécessaires et l´accès à ce mannuel d´utilisation. Suivez les instructions pour le montage risque de blessure si ces instructions ne sont pas suivies. L´appareil n´est pas destiné à être utilisé par des enfants ou des personnes handicapées sans surveillance. S´il y a des dommages visibles sur le produit, l´installation ne doit pas être effectuée. Prendre en compte lors de la construction du matériel, dans lequel l´actionneur est incorporé, qu´il ne doit y avoir aucune possibilité de blessures corporelles, telles que la compression des doigts ou des bras. Assurez un espace libre autours du materiel pour éviter tout blocage.
Page 6 of 20

Seulement pour les marchés au sein de l´UE: Cet appareil peut-être utilisé par des enfants âgés de 8 ans et plus, ainsi que les personnes dont les capacités physiques, sensorielles ou mentales sont réduites ou ayant un manque d´expérience et de connaissance si elles ont bénéficié d´une surveillance ou d´instructions concernant l´utilisation de l´appareil en toute sécurité et compris les risques encourus. Les enfants ne doivent pas jouer avec l´appareil. Le nettoyage et l´entretien ne doivent pas être rèalisés par des enfants sans surveillance.
Seulement pour les marchés hors UE: Les personnes qui n´ont pas l´expérience ou les connaissances nécessaires sur le ou les produit(s) ne doivent pas le ou les utiliser. Par ailleurs, les personnes ayant des capacités physiques, sensorielles ou mentales réduites ne doivent pas utiliser le ou les produit(s), sauf si elles sont sous surveillance ou ont suivi une formation approfondie de l´utilisation de l´appareil par l´individu responsable de la securité de ces personnes. De plus, les enfants doivent-être sous surveillance afin de s´assurer qu´ils ne jouent pas avec le produit.
Utilisation abusive: Ne surchargez pas les actionneurs cela peut engendrer un risque de blessures corporelles et endommager le système. Ne pas utiliser les actionneurs pour soulever des personnes. Ne pas s´asseoir ou se tenir debout sur une table en fonctionnement risque de blessures. Ne pas utiliser le système dans des environnements autres que l´utilisation intérieure prévue.
Page 7 of 20

Repairs
In order to avoid the risk of malfunction, all DESKLINE® repairs must only be carried out by authorised LINAK® workshops or repairers, as special tools must be used and special gaskets must be fitted. Lifting units under warranty must also be returned to authorised LINAK workshops.
Warning! If any of the DESKLINE® products are opened, there will be a risk of subsequent malfunction.
Warning! The DESKLINE® systems are not resistant to cutting oil.

Manufacturer's declaration

DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY

LINAK A/S Smedevænget 8 DK - 6430 Nordborg

Herewith declares that LINAK DESKLINE® products as characterized by the following models and types:

Control Boxes Linear Actuators Lifting Columns
Desk Panels RF Controls

CBD6S DB5, DB6, DB14, LA23, LA31 DL1A, DL2, DL4S, DL5, DL5IC, DL6, DL6IC, DL7, DL8, DL8IC, DL9, DL9IC, DL10, DL10IC, DL11, DL11IC, DL12, DL14, DL15, DL16, DL16IC, DL17, DL19, DL19IC, BASE1
DPA, DPB, DPH, DPF, DPG, DPT, DP, DP1CS
HB10RF, HB20RF, RFRL

Accessories

BA001, BLE2LIN, DS1, DF2, Kick & Click, SLS, SMPS001, SMPS002, SMPS006

comply with the following parts of the Machinery Directive 2006/42/EC, ANNEX I, Essential health and safety requirements relating to the design and construction of machinery:

1.5.1 Electricity supply

The relevant technical documentation is compiled in accordance with part B of Annex VII and that this documentation or part hereof will be transmitted by post or electronically to a reasoned request by the national authorities.

This partly completed machinery must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with the provisions of the Machinery Directive 2006/42/EC where appropriate.

Nordborg, 2019-05-27

LINAK A/S John Kling, B.Sc.E.E. Certification and Regulatory Affairs Authorized to compile the relevant technical documentation
Page 8 of 20

DECLARATION OF CONFORMITY
LINAK A/S Smedevænget 8 DK - 6430 Nordborg

hereby declares that LINAK Actuator System composed of:

Control Box(s)

CBD6SP00020A-009

CBD6S*000*0A-709

(The `*' in the product description can either be a character or a number, thereby defining the variation of the product)

And Linear Actuator(s) Lifting Column(s)

DB4, DB5, DB6, DB7, DB9, DB12, DB14, DB16, LA23, LA31 series and / or DL1A, DL2, DL4, DL5, DL6, DL7, DL8, DL9, DL10, DL11, DL12, DL12W, DL14, DL15, DL16, DL17, DL19, BASE1 series

And

Desk Panel(s)

DP*(C,K,L,U,V), WDPL1

(The `*' in the product description can either be 1, 2, 3, A, B, H, T; thereby defining the variation of the product)

complies with EMC Directive: 2014/30/EU according to following standards: EN 61000-6-1:2007, EN 61000-6-3:2007+A1:2011+AC:2012
complies with Low Voltage Directive 2014/35/EU according to the standard: EN 60335-1:2012+A11:2014
complies with RoHS2 Directive 2011/65/EU according to the standard: EN 50581:2012

Additional information: The system does also comply with the standard: EN 13849-1:2015 SRP/CS Cat. B, PL = b and SRESW PL = b Note 1: Exempted CBD6S with SW03003007 printed on the label.

Nordborg, 2019-06-07

LINAK A/S
John Kling, B.Sc.E.E. Certification and Regulatory Affairs Authorized to compile the relevant technical documentation

Original Declaration

Page 9 of 20

Misc. on the DESKLINE® system
Warranty 60 months' warranty on the DESKLINE products when used in DESKLINE applications against manufacturing faults from the production date of the individual products. The LINAK warranty is only valid in so far as the equipment has been used and maintained correctly and has not been tampered with. Furthermore, the system must not be exposed to violent treatment. In the event of this, the warranty will be ineffective/invalid. For further details, please see standard terms of sale and delivery for LINAK A/S. Maintenance Clean dust and dirt on the outside of the system at appropriate intervals and inspect for damage and breaks. Inspect the connections, cables, and plugs and check for correct functioning as well as fixing points.
The cleaners and disinfectants must not be highly alkaline or acidic (pH value 6-8).
Page 10 of 20

Valid for:
This User manual is valid for the following product: Desk SensorTM 1
Page 11 of 20

Installation
Ensure that the CBD6S and/or T-splitter are fixed securely to the tabletop for optimal DS1 performance.

The DS1 reacts to angle changes from its original position. Thus, the DS1 mounting direction is not important.

If the DS1 is removed from the system or is no longer mounted correctly, the desk panel will show error 94 at the first activation. At the next activation, however, the desk will drive as intended.

The DS1 can be installed in any direction as tilting is detected in three planes.

X-axis

Y-axis

Z-axis

System with Control Box CBD6S 1. Plug DS1 into port A1 on CBD6S.

Ensure that the cable mounted in port A2 is fastened thoroughly and cannot touch the DS1 while the desk is running.
System with IC columns 1. Mount T-splitter on tabletop using two M4.5 x 25 screws. 2. Plug DS1 into port on single-port side of T-splitter.
Always use the port on the single-port side of the T-splitter for the DS1 to ensure that the DS1 is not undesirably triggered by movement of the serial cable or the cable for the desk panel.
Page 12 of 20

3. Plug serial cable into RJ45 socket on IC column. 4. Plug serial cable into a port on double-port side of T-splitter. 5. Plug cable for desk panel into the other port on double-port side of T-splitter.
Page 13 of 20

Method of operation
The DS1 operates on the gyroscope principle detecting tilting of the desk. If the desk starts tilting while driving up or down, the DS1 reacts to an angle change. If the angle change is larger than 0.7° per second, the DS1 immediately stops the desk and drives it in the opposite direction. This return drive automatically continues for maximum 4 seconds (approximately 40 mm). The return drive is independent of the user's interaction with the control but will never run farther than the run causing the collision. The original angle of the DS1 is updated each time the desk is operated after the control has been in sleep mode (approximately 10 seconds after operation). The gyroscope will allow a slight change in angle (below 0.7° per second), for example if a heavy load is placed on one side of the desk forcing the desk to lean slightly, but if the absolute tilt exceeds 10° compared to the original angle of the DS1, the desk will stop and drive in the opposite direction.
The desk construction may influence the DS1 function: · On a desk with a very fixed frame, the force required for the desk to tilt is bigger, thus collision
(e.g. with soft objects) may not cause the desk to tilt at all. · On a desk with a very loose frame, the tabletop may tilt easily and cause undesired triggering,
even when no collision is actually happening.
The Anti-Collision function is not activated if the collision happens: · during the initialisation procedure · within the first 0.8 seconds of desk panel activation (ramp-up time)
The DS1 is very sensitive and may cause false triggering if not mounted correctly. To achieve the best possible performance of the DS1, install the DS1 on the tabletop via either a CBD6S or a T-splitter. In case of false triggering, please check this list: · Make sure that the control box or T-splitter is fixed securely to the table. · Make sure the cables connected next to the DS1 in the control box or T-splitter are fastened thoroughly
and cannot touch the DS1. · If the desk is unstable, it may result in false triggering. Make sure the desk is stable and cannot tilt back
and forth by adjusting the screws under the feet correctly. · Make sure that no objects such as cables or furniture under the desk can stop the driving up or down of the desk. · If none of the above helps:
- unplug the DS1 - wait 10 seconds - plug the DS1 back in
Page 14 of 20

Disposal of LINAK products
As our customers often ask us how our products can be disposed of or scrapped we have prepared this guidance that enables a classification to different waste fractions for recycling or combustion.
Guidance We recommend that our products be disassembled as much as possible and divided into different waste groups for recycling or combustion. For example, waste can be sorted into metals, plastics, cable scrap, combustible material and recoverable resources. Some of these main groups can be further divided into subgroups; e.g. metal can be divided into steel/ aluminium/copper and plastic can be divided into ABS/PA/PE/PP. As an example, the table below breaks down the different components in LINAK products to various recycling groups:

Main groups of disposal

Product main groups

Metal scrap

Cable scrap

Electronics Plastic recycling Comments

scrap

or combustion

Desk SensorTM 1

T-splitter

Serial cable

Page 15 of 20

DRAWING APPENDIX
Desk SensorTM 1

10.8

14.6

T-splitter

60.1

Page 16 of 20

Label
Desk Sensor 1 T-splitter
Page 17 of 20

LINAK APPLICATION POLICY The purpose of the application policy is to define areas of responsibilities in relation to applying a LINAK product defined as hardware, software, technical advice, etc. related to an existing or new customer application. LINAK products as defined above are applicable for a wide range of applications within the Medical, Furniture, Desk and Industry areas. Yet, LINAK cannot know all the conditions under which LINAK products will be installed, used, and operated, as each individual application is unique. The suitability and functionality of the LINAK product and its performance under varying conditions (application, vibration, load, humidity, temperature, frequency, etc.) can only be verified by testing, and shall ultimately be the responsibility of the LINAK customer using any LINAK product. LINAK shall be responsible solely that the LINAK products comply with the specifications set out by LINAK and it shall be the responsibility of the LINAK customer to ensure that the specific LINAK product can be used for the application in question.
Page 18 of 20

Page 19 of 20

FACTORIES China
LINAK (Shenzhen) Actuator Systems, Ltd. Phone: +86 755 8610 6656 Phone: +86 755 8610 6990 E-mail: sales@linak.cn www.linak.cn
Denmark - Headquarters LINAK A/S - Group Headquarters Phone: +45 73 15 15 15 Fax: +45 74 45 80 48 Fax (Sales): +45 73 15 16 13 E-mail: info@linak.com www.linak.com
USA LINAK U.S. Inc. North and South American Headquarters Phone: +1 502 253 5595 Fax: +1 502 253 5596 E-mail: info@linak-us.com www.linak-us.com www.linak-latinamerica.com
SUBSIDIARIES Australia
LINAK Australia Pty. Ltd Phone: +61 3 8796 9777 Fax: +61 3 8796 9778 E-mail: sales@linak.com.au www.linak.com.au
Austria LINAK Repräsentanz - Österreich (Wien) Phone: +43 (1) 890 7446 Fax: +43 (1) 890 744615 E-mail: info@linak.de www.linak.at - www.linak.hu
Belgium LINAK Actuator-Systems NV/SA (Belgium & Luxembourg) Phone: +32 (0)9 230 01 09 E-mail: beinfo@linak.be www.linak.be - www.fr.linak.be
Brazil LINAK Do Brasil Comércio De Atuadores Ltda. Phone: +55 (11) 2832 7070 Fax: +55 (11) 2832 7060 E-mail: info@linak.com.br www.linak.com.br
Canada LINAK Canada Inc. Phone: +1 502 253 5595 Fax: +1 416 255 7720 E-mail: info@linak.ca www.linak-us.com
Czech Republic LINAK C&S s.r.o. Phone: +42 058 174 1814 Fax: +42 058 170 2452 E-mail: info@linak.cz www.linak.cz
Denmark - International LINAK International Phone: +45 73 15 15 15 E-mail: info@linak.com www.linak.com

Denmark - Sales LINAK DANMARK A/S Phone: +45 86 80 36 11 Fax: +45 86 82 90 51 E-mail: linak@linak-silkeborg.dk www.linak.dk

New Zealand LINAK New Zealand Ltd Phone: +64 9580 2071 Fax: +64 9580 2072 E-mail: nzsales@linak.com.au www.linak.com.au

Finland LINAK OY Phone: +358 10 841 8700 E-mail: linak@linak.fi www.linak.fi

Norway LINAK Norge AS Phone: +47 32 82 90 90 E-mail: info@linak.no www.linak.no

France LINAK FRANCE E.U.R.L Phone: +33 (0) 2 41 36 34 34 Fax: +33 (0) 2 41 36 35 00 E-mail: linak@linak.fr www.linak.fr
Germany LINAK GmbH Phone: +49 6043 9655 0 Fax: +49 6043 9655 60 E-mail: info@linak.de www.linak.de
India LINAK A/S India Liaison Office Phone: +91 120 4531797 Fax: +91 120 4786428 E-mail: info@linak.in www.linak.in
Ireland LINAK UK Limited (Ireland) Phone: +44 (0)121 544 2211 Fax: +44 (0)121 544 2552
+44 (0)796 855 1606 (UK Mobile) +35 387 634 6554 (Republic Of Ireland Mobile) E-mail: sales@linak.co.uk www.linak.co.uk
Italy LINAK ITALIA S.r.l. Phone: +39 02 48 46 33 66 Fax: +39 02 48 46 82 52 E-mail: info@linak.it www.linak.it
Japan LINAK K.K. Phone: 81-45-533-0802 Fax: 81-45-533-0803 E-mail: linak@linak.jp www.linak.jp
Malaysia LINAK Actuators Sdn. Bhd. Phone: +60 4 210 6500 Fax: +60 4 226 8901 E-mail: info@linak-asia.com www.linak.my - www.linak.co.id www.linak.pk - www.linak.ph
Netherlands LINAK Actuator-Systems B.V. Phone: +31 76 5 42 44 40 /
+31 76 200 11 10 E-mail: info@linak.nl www.linak.nl

Poland LINAK Polska LINAK Danmark A/S (Spólka Akcyjna) Phone: +48 22 295 09 70 /
+48 22 295 09 71 E-mail: info@linak.pl www.linak.pl
Republic of Korea LINAK Korea Ltd. Phone: +82 2 6231 1515 Fax: +82 2 6231 1516 E-mail: info@linak.kr www.linak.kr
Russia LINAK LLC Phone: +7 495 780 3161 Fax: +7 495 687 1426 E-mail: info@linak.ru www.linak.ru
Spain LINAK Actuadores, S.L.u Phone: +34 93 588 27 77 Fax: +34 93 588 27 85 E-mail: esma@linak.es www.linak.es
Sweden LINAK Scandinavia AB Phone: +46 8 732 20 00 Fax: +46 8 732 20 50 E-mail: info@linak.se www.linak.se
Switzerland LINAK AG Phone: +41 43 388 31 88 Fax: +41 43 388 31 87 E-mail: info@linak.ch www.linak.ch - www.fr.linak.ch www.it.linak.ch
Taiwan LINAK (Shenzhen) Actuator systems Ltd. Taiwan Representative office Phone: +886 2 272 90068 Fax: +886 2 272 90096 E-mail: sales@linak.com.tw www.linak.com.tw
Turkey LINAK th. hr. San. ve Tic. A.. Phone: + 90 312 4726338 Fax: + 90 312 4726635 E-mail: info@linak.com.tr www.linak.com.tr
United Kingdom LINAK UK Limited Phone: +44 (0)121 544 2211 Fax: +44 (0)121 544 2552 E-mail: sales@linak.co.uk www.linak.co.uk

Terms of use The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing accurate and up-to-date information on its products. However, due to continuous development in order to improve its products, LINAK products are subject to frequent modifications and changes without prior notice. Therefore, LINAK cannot guarantee the correct and actual status of said information on its products. While LINAK uses its best efforts to fulfil orders, LINAK cannot, for the same reasons as mentioned above, guarantee the availability of any particular product. Therefore, LINAK reserves the right to discontinue the sale of any product displayed on its website or listed in its catalogues or other written material drawn up by LINAK. All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof, please contact LINAK.
Page 20 of 20

DISTRIBUTORS Argentina
NOVOTEC ARGENTINA SRL Phone: 011-4303-8989 / 8900 Fax: 011-4032-0184 E-mail: info@novotecargentina.com www.novotecargentina.com
Colombia MEM Ltda Phone: +[57] (1) 334-7666 Fax: +[57] (1) 282-1684 E-mail: servicioalcliente@memltda.com.co www.mem.net.co
India Mechatronics Control Equipments India Pvt Ltd Phone: +91-44-28558484, 85 E-mail: bala@mechatronicscontrol.com www.mechatronicscontrol.com
Indonesia PT. HIMALAYA EVEREST JAYA Phone: +6 221 544 8956, +6 221 544 8965 Fax: +6 221 619 1925 Fax (Sales): +6 221 619 4658 E-mail: hejplastic-div@centrin.net.id www.hej.co.id
Israel NetivTech LTD Phone: +972 55-2266-535 Fax: +972 2-9900-560 Email: info@NetivTech.com www.netivtech.com
Russia OOO FAM Phone: +7 812 3319333 Fax: +7 812 3271454 E-mail: purchase@fam-drive.ru www.fam-drive.ru
Singapore Servo Dynamics Pte Ltd Phone: +65 6844 0288 Fax: +65 6844 0070 E-mail: servodynamics@servo.com.sg
South Africa Industrial Specialised Applications CC Phone: +27 011 466 0346 E-mail: gartht@isagroup.co.za www.isaza.co.za
United Arab Emirates Mechatronics Phone: +971 4 267 4311 Fax: +971 4 267 4312 E-mail: mechtron@emirates.net.ae

LINAK A/S reserve the right to make technical alterations

References

GPL Ghostscript 9.55.0 Adobe InDesign 14.0 (Windows)