partners.com - partners Resources and Information.
User Guide for S P models including: SP-006-02-A5 EV Charger, SP-006-02-A5, EV Charger, Charger
Simpson & Partners EV Charger
2022-08-12 — This must be done by a certified electrician. Setup Button. 06. The spring-loaded charge socket door prevents water and dirt from entering ...
File Info : application/pdf, 2 Pages, 192.30KB
DocumentDocumentNICE TO MEET YOU Getting to know your charger 01 Status LED The light communicates the status of the chargepoint. Refer to the LED chart to understand the different light signals. 02 Override Button The override button can be used to override any smart charge schedules that you have set. You can use it to initiate an immediate vehicle charge or to clear an RCM fault. 03 Charge Socket Door The spring-loaded charge socket door prevents water and dirt from entering the socket. 04 Courtesy Lights The courtesy lights will turn on automatically when the charge socket door is opened. The lights will turn off after 25 seconds. 05 Charger Socket The Charger Socket is a universal type 2 socket and can be used with all kinds of electric vehicle. During a charge, the charging cable will lock onto the charger socket. To lock the charging cable permanently into the charger socket, simply open the app and select "tethered mode". 06 Setup Button The set-up button is used to configure the charger. This must be done by a certified electrician. SIMPSON-PARTNERS.COM 01 02 03 034 035 036 Quick start guide START CHARGING STOP CHARGING SMART CHARGING CLEANING To start charging, connect your charging cable to the vehicle and then plug the charging cable into the charger. The charge will begin automatically and you will see the status light change to green. During a vehicle charge, the charging cable will lock itself into the charger socket. To stop charging, first unlock the vehicle and disconnect the charging cable. You can then remove the cable from the charger socket. N.B. The charging cable will remain locked into the charger until the charge is complete or has been stopped by the car. Our app allows you to control smart charging features like a scheduler and solar panels. Your charger will arrive ready to go, so you don't need to clean it before usage. To keep your charger looking brand new, give the unit an occasional clean with a damp cloth and an all-purpose household cleaner. Avoid using strong chemicals containing oil or alcohol as these could discolour paint and wood. Never use a high-pressure water jet to clean your charger. STATUS LIGHTS CHARGER IN STANDBY CAR CONNECTED CHARGING IN PROGRESS CHARGER LOCKED SMART SCHEDULE ACTIVE FIRMWARE UPDATE (FLASHING) IDENTIFY CHARGER (FLASHING) FAULT DETECTED (FLASHING) E. support@simpson-partners.com W. simpson-partners.com/support T. 01793315197