Somfy GLYDEA2 ULTRA 50 WF Zigbee HP - Short Installation Guide

Getting Started

Important Note: Do not unplug the battery while the motor is operating. ⚠️

For additional assistance, download the "Help me by Somfy" application (available on the App Store and Google Play).

At the product selection stage, scan the QR code provided on the physical product packaging.

1. Start Up

To set up the drive, download the "TaHoma pro" application from your device's app store (Google Play or Apple App Store).

2. Drive Setting

Once the "TaHoma pro" application is downloaded, open it and follow the on-screen instructions to set up the drive.

3. Use

This drive requires no regular maintenance operations.

Control Options:

• OPEN: Opens the curtains.
• STOP: Stops the curtains.
• MY: Sets or recalls the favorite (my) position.
• CLOSE: Closes the curtains.

The application allows for single or double motor control (e.g., "x2 my").

4. Drive Resetting

This reset procedure deletes all programmed control points, end limit settings, and the favorite (my) position.

To reset the motor: Press and hold the button until the motorized product moves 3 times. All settings will be erased.

(Visual representation: A circular diagram showing a motor with a button, with "12 s" and "x3" indicating duration and repetitions.)

Instructions to be Respected

These instructions apply to all GLYDEA2 ULTRA 50 WF Zigbee HP drives.

Field of Application

The Glydea Ultra drives are designed to operate all types of curtain tracks.

Liability

Please read these instructions carefully before installing and using the drive. In addition to these instructions, observe the detailed instructions provided in the attached "Safety Instructions" document.

The drive must be installed by a motorization and home automation professional, following Somfy's instructions and applicable country regulations.

Using the drive outside its described field of application, or failing to comply with these instructions and the Safety Instructions document, absolves Somfy of any liability and invalidates the warranty.

The installer must inform customers about the operating and maintenance conditions and provide them with the instructions and the Safety Instructions document after installation.

After-Sales Service operations must be performed by a qualified professional.

If in doubt during installation or for additional information, contact a Somfy advisor or visit www.somfy.com.

Safety Instructions for Wiring

• Cables passing through a metal wall must be protected and isolated using a sheath or sleeve.
• Secure cables to prevent contact with moving parts.
• If the drive is used outdoors and the power supply cable is H05VV-F type, install the cable in a UV-resistant duct (e.g., under a gland).
• Ensure the drive's power supply cable is accessible for easy product replacement.
• Always make a loop in the power supply cable to prevent water from entering the drive.

Warnings and Technical Information

WARNING: Electrical Safety

• This Class III drive must be powered by a SELV (Safety Extra Low Voltage) source.
• Installation must be performed by a qualified motorization and home automation professional, adhering to Somfy instructions and local regulations.
• Using this drive with products not listed in the "Compatibility matrix" document will void the Somfy warranty and release Somfy from liability.
• For battery recharging, use only the provided detachable supply unit.
• Improper battery use can lead to overheating, fire, explosion, causing serious injury or death.
• Do not expose the drive or battery to excessive temperatures.
• Risk of short circuit if battery terminals or drive terminals contact metal objects.
• Ensure the battery is fully charged before installation.
• To prolong battery life, fully charge it every other year.

Technical Specifications

Regulatory Information

Trademarks: The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. Other trademarks are property of their respective owners.

Reference: 1246594

Designation: GLYDEA2 ULTRA 50 WF Zigbee HP

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received. This equipment complies with FCC radiation exposure limits for uncontrolled environments. Minimum distance of 20 cm between the radiator and any part of the body is required. FCC ID: DWN-GL2UWF50ZHP.

ISED Compliance (Canada): This equipment complies with IC RSS-102 radiation exposure limits for uncontrolled environments. Minimum distance of 20 cm between the radiator and any part of the body is required. This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to two conditions: (1) it may not cause interference, and (2) it must accept any interference received. ISED ID: 12049A-GL2UWF50ZHP.

Trademarks: Apple, iPad®, iPhone®, App Store are trademarks of Apple Inc. Android is a trademark of Google LLC.

Recycling: Please separate batteries from other waste and recycle them via local collection facilities. Do not dispose of the appliance with household waste; use an approved collection point.

Certifications: CULUS LISTED (SHADE OPERATOR E514135). US patents and design patents pending.

Note on FCC Testing: This equipment has been tested and found to comply with Class B digital device limits per FCC Rules. These limits aim to provide reasonable protection against harmful interference in residential installations. If interference occurs, try reorienting the antenna, increasing separation, connecting to a different circuit, or consulting a dealer/technician.