
Trane - Submittal Split System Heat Pump 4TWX7036E1000A
Trane - Submittal Split System Heat Pump 4TWX7036E1000A
4TWX7036E-SUB-1A-EN Submittal
3 Ton Split System Heat Pump -- 1 Ph
4TWX7036E1000A
Note: "Graphics in this document are for representation only. Actual model may differ in appearance."
August 2022
4TWX7036E-SUB-1A-EN
NOTE: All dimensions are in mm/inches.
From Dwg. D152635 Rev. 16
MODEL
BASE
A
B
C
D
4TWX7036E
4
1307.024
946
870
(51.435) (37-1/4) (34-1/4)
3/4
Product Specifications
OUTDOOR UNIT
4TWX7036E1000A
POWER CONNS. -- V/PH/HZ MIN. BRCH. CIR. AMPACITY
BR. CIR. PROT. RTG. MAX. (AMPS)
208/230/1/60 20 35
COMPRESSOR NO. USED - NO. STAGES
VOLTS/PH/HZ
R.L. AMPS - L.R. AMPS FACTORY INSTALLED
START COMPONENTS INSULATION/SOUND BLANKET
COMPRESSOR HEAT
CLIMATUFF® - SCROLL 1 - 2
208/230/1/60 15.3 - 83
NO (Uses BAYKSKT266) NO YES
OUTDOOR FAN DIA. (IN.) - NO. USED
TYPE DRIVE - NO. SPEEDS
CFM @ 0.0 IN. W.G. NO. MOTORS - HP
MOTOR SPEED R.P.M.
VOLTS/PH/HZ
F.L. AMPS
PROPELLER 27.6 - 1
DIRECT - 1 3700 1 - 1/8 835
200/230/1/60 0.77
OUTDOOR COIL -- TYPE ROWS - F.P.I.
FACE AREA (SQ. FT.)
TUBE SIZE (IN.)
REFRIGERANT CONTROL
SPINE FINTM 1 - 24 30.79 3/8 EEV
REFRIGERANT LBS. -- R-410A (O.D. UNIT) FACTORY SUPPLIED
LINE SIZE - IN. O.D. GAS LINE SIZE - IN. O.D. LIQ.
R-410A 10 LBS.- 15 OZ.
YES 3/4 3/8
CHARGING SPECIFICATION
SUBCOOLING
9°F
DIMENSIONS CRATED (IN.)
H X W X D 55.6 X 35.1 X 38.7
WEIGHT
SHIPPING (LBS.)
307
NET (LBS.)
257
Certified in accordance with the Air-Source Unitary Air-conditioner Equipment certification program, which is based on AHRI standard 210/240. In
order to achieve AHRI standard rating, the indoor fan time delay on the
comfort control must be enabled.
Rated in accordance with AHRI standard 270. Calculated in accordance with Natl. Elec. Codes. Use only HACR circuit
breakers or fuses.
Standard Air -- Dry Coil -- Outdoor This value approximate. For more precise value see unit nameplate. Max. linear length 60 ft.; Max. lift - Suction 25 ft.; Max lift - Liquid 25 ft. For
greater length consult refrigerant piping software Pub. No. 32-3312-0*
(* denotes latest revision).
This value shown for compressor RLA on the unit nameplate and on this specification sheet is used to compute minimum branch circuit ampacity
and max. fuse size. The value shown is the branch circuit selection current.
No means no start components. Yes means quick start kit components. PTC means positive temperature coefficient starter.
E
F
G
H
J
K
3/8
152 (6)
98 (3-7/8)
219 (8-5/8)
86 (3-3/8)
668.024 (26.31)
Sound Power Level
Model
A-Weighted Sound Power Level [dB(A)]
63 Hz
125 Hz
Full Octave Sound Power [dB] 250 Hz 500 Hz 1000 Hz 2000 Hz
4TWX7036E
72
66
66
64
64
63
57
Note: Rated in accordance with AHRI Standard 270-2008
4000 Hz 54
8000 Hz 48
2
4TWX7036E-SUB-1A-EN
Mechanical Specification Options
General The outdoor condensing units are factory charged with the system charge required for the outdoor condensing unit, ten (10) feet of tested connecting line, and the smallest rated indoor evaporative coil match. This unit is designed to operate at outdoor ambient temperatures as high as 115°F. Cooling capacities are matched with a wide selection of air handlers and furnace coils that are AHRI certified. The unit shall be certified to UL 1995. Exterior is designed for outdoor application.
Casing Unit casing is constructed of heavy gauge, G60 galvanized steel and painted with a weather-resistant powder paint on all louvers and panels. Corrosion and weatherproof CMBP-G30 DuraTuffTM base.
Refrigerant Controls Refrigeration system controls include condenser fan, compressor contactor and high pressure switch. High and low pressure controls are inherent to the compressor. A factory installed liquid line drier is standard.
Compressor The Climatuff® 2-stage compressor features internal over temperature and pressure protection and hermetic motor. Other features include: roto lock suction and discharge refrigerant connections, centrifugal oil pump and modular plugs for electrical connections.
Condenser Coil The outdoor coil provides low airflow resistance and efficient heat transfer. The coil is protected on all four sides by louvered panels.
Low Ambient Cooling As manufactured, this unit has a cooling capability to 55°F. For low ambient cooling below 55° see Application Guide APP-APG013-EN.
Trane - by Trane Technologies (NYSE: TT), a global climate innovator - creates comfortable, energy efficient indoor environments for commercial and residential applications. For more information, please visit trane.com or tranetechnologies.com.
The AHRI Certified mark indicates Trane U.S. Inc. participation in the AHRI Certification program. For verification of individual certified products, go to ahridirectory.org.
Trane has a policy of continuous data improvement and it reserves the right to change design and specifications without notice. We are committed to using environmentally conscious print practices.
4TWX7036E-SUB-1A-EN 09 Aug 2022 Supersedes (New)
© 2022 Trane
Adobe InDesign 17.0 (Windows) Adobe PDF Library 16.0.3; modified using iText 2.1.7 by 1T3XT