RRNUY A86 Portable Karaoke Speaker

Dear Customer

To achieve the best performance from your RRNUY A86 speaker, please read this instruction manual carefully before use and keep it for future reference.

This unit may be subject to changes in specifications, characteristics, and/or operation without prior notice to the user, in order to continue improving and developing its technology.

Contents Overview

This manual covers the following topics:

• Technical Specifications
• Important Notice Before Use
• Your Party Speaker (Introduction, What's in the box, Control Panel Overviews)
• Get Started (Connect power, Turn ON/OFF, Charging)
• Play (Basic operations, Bluetooth, AUX, USB, Microphone/Guitar)
• Troubleshooting

Technical Specifications

Important Notice Before Use

Please follow these instructions carefully:

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all warnings.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
13. Battery Usage CAUTION: To prevent battery leakage which may result in bodily injury, property damage, or damage to the remote control:
    • Install all batteries correctly, noting the '+' and '-' markings.
    • Do not mix batteries (old and new, or carbon and alkaline, etc.).
    • Remove batteries when the remote control is not used for a long time.
    • Do not expose batteries (battery pack or batteries) to excessive heat such as sunshine, fire, or the like.
14. Apparatus shall not be exposed to dripping or splashing.
15. Do not place any sources of danger on the apparatus (e.g., liquid-filled objects, lighted candles).
16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Your Party Speaker

What's In The Box

Check and identify the contents of your package:

• Speaker
• User manual
• Aux In Cable
• AC Power Cable

Overview of the Top Control Panel

The top panel features the following controls and inputs:

• 1. MIC/GT VOL ECHO/REVERB knob: Controls microphone/guitar volume, echo, and reverb.
• 2. BT button: Switches to Bluetooth mode.
• 3. Lights Control button: Cycles through different light effects.
• 4. AUX Input: For connecting audio devices via AUX cable.
• 5. USB Input: For playing music from USB storage devices.
• 6. MIC PRI button: Activates microphone priority mode (dims music when mic is active).
• 7. MIC VOCAL button: Reduces the human voice in music.
• 8. MIC Input jack: 6.35mm jack for microphone.
• 9. GUITAR Input jack: 6.35mm jack for guitar.
• 10. REC button: Starts recording music and MIC source to a connected USB device.
• 11. REC PLAY button: Plays content recorded on USB.
• 12. VOLUME button: Adjusts the main volume.
• 13. MIC TONE- button: Decreases microphone treble/bass.
• 14. Power On/Off button: Turns the speaker on or off.
• 15. MIC TONE button: Selects microphone bass and treble.
• 16. MIC TONE+ button: Increases microphone treble/bass.
• 17. EQ button: Switches between EQ presets (ROCK, FLAT, CLASSIC, JAZZ, POP, BASS).
• 18. Previous Button: Skips to the previous track in USB/BT mode.
• 19. Play/Pause Button: Plays or pauses music.
• 20. Function Switching button: Switches modes (Bluetooth, USB, AUX).
• 21. Next Button: Skips to the next track in USB/BT mode.

Overview of the Rear Panel

The rear panel includes the following connections:

• 1. TYPE-C Input jack: For TYPE-C charging only.
• 2. AC Power Input jack: For connecting the main power adapter.

Get Started

Always follow the instructions in this chapter in sequence.

Connect Power

Before connecting the AC power cord, ensure all other connections are completed.

Turn ON/OFF the Speaker

It is recommended not to use the speaker connected to the electrical network continuously, as this affects the useful life of the battery.

Once the battery is fully charged, press the power button on the top control panel to start the speaker.

Charging the Internal Battery

The speaker comes with a built-in rechargeable battery. Follow these steps to charge it:

1. Connect the power cable and plug it into the wall socket on the rear panel.
2. The POWER button light will turn red while charging.
3. When the battery is fully charged, the POWER button light will turn blue, and the light will turn off automatically. Unplug the power cable to stop charging.

Please fully charge the product when it is not going to be used for a long time, and charge it once a month to maintain battery life.

Play - Basic Button Operations

You can control playback using the following buttons:

Connectivity Options

6. Connect with Bluetooth ?

1. Press the M button to switch to BLUETOOTH CONNECT mode; "(BT)" will be displayed on the screen.
2. Open Bluetooth on your external device (it must have Bluetooth functionality). The name "A86" should appear; connect to it.
3. Once connected, you will hear a small sound from the speaker.
4. You can use the ◀️ or ▶️ buttons on the Top Control panel to control tracks of the external device.

Note: This speaker does not require a password for Bluetooth connection.

7. Connect with AUX Line In ?

1. Press the M button to switch to AUX (Line) mode; "(AUX)" will be displayed on the screen.
2. Connect this speaker to the AUX input jack and the external device's earphone jack using the provided AUX cable.
3. Once connected, play music from your external device.
4. You can use the ◀️ or ▶️ buttons on the Top Control panel to control tracks of the external device.

8. Play from USB ?

Ensure that the USB storage device contains playable audio in supported MP3 format.

1. Insert the USB storage device into the "USB" socket on the speaker.
2. Press the ◀️ or ▶️ buttons to select a track.
3. Press the ▶️/⏸️ button to play or pause.

Important:

• The USB socket is only for music playing, not for charging.
• The maximum memory size for USB is 64GB.
• USB memory devices should be formatted as FAT64.

9. Connect with Microphone/Guitar ??

Insert a 6.35mm wired microphone to play with the microphone.

Insert a 6.35mm wired guitar to play with the guitar.

Press the MIC/GT VOL/ECHO REVERB knob and rotate it to adjust the level of volume, echo, and reverb for the microphone.

Press the MIC TONE button to adjust the level of treble/bass for the microphone.

When playing with the microphone, press the MIC PRI button to enable microphone priority.

Important Notes for Microphone Use

While using the microphone, avoid positioning the microphone opposite the speaker's bass, as this may cause whistling noise.

For the best singing performance, keep the microphone within 5-15cm of your mouth and at a 45-degree angle.

11. Troubleshooting

If you encounter problems when using this speaker, check the following points before requesting service:

No Power

• Ensure that the AC power plug of the speaker is connected properly.
• Ensure that there is power at the AC outlet.

No Sound or Poor Sound

• Adjust the volume.
• Disconnect the headphones.
• Check that the speakers are connected correctly.
• Check if the stripped speaker wires are clamped.

No Response from the Speaker

• Disconnect and reconnect the AC power plug, then turn on the speaker again.

Bluetooth® Trademark Information

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. Any use of such marks by Guangzhou Jie Li Electron Co., Ltd. is under license. Other trademarks are those of their respective owners, and all rights are acknowledged.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirements. The device can be used in 0mm exposure condition, compliance with exposure requirements.