Bosch EasyGrassCut 18V Cordless Grass Trimmer

EU Declaration of Conformity

Bosch declares under its sole responsibility that the products listed comply with all applicable provisions of the directives and regulations listed below and are in conformity with the following standards.

Product Models:

• EasyGrassCut 18V-230 (Article No. 3 600 HC1 A02)
• EasyGrassCut 18V-26 (Article No. 3 600 HC1 C06)
• EasyGrassCut 18V-260 (Article No. 3 600 HC1 C07)
• EasyGrassCut 18 (Article No. 3 600 HC1 A01)
• EasyGrassCut 18-230 (Article No. 3 600 HC1 C05)
• EasyGrassCut 18-26 (Article No. 3 600 HC1 C03)
• EasyGrassCut 18-260 (Article No. 3 600 HC1 C04)

Applicable Directives and Regulations:

• The Supply of Machinery (Safety) Regulations 2008
• The Electromagnetic Compatibility Regulations 2016
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
• The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001

Conformity Standards:

• EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019+A15:2021
• EN 50636-2-91: 2014
• EN IEC 55014-1:2021
• EN IEC 55014-2:2021
• EN IEC 63000:2018

Noise Emission Data:

• For 3 600 HC1 A..: Measured sound power level 79 dB(A), guaranteed sound power level 88 dB(A)
• For Edge cutting: Measured sound power level 82 dB(A), guaranteed sound power level 88 dB(A)
• For 3 600 HC1 C..: Measured sound power level 80 dB(A), guaranteed sound power level 86 dB(A)
• For Edge cutting: Measured sound power level 81 dB(A), guaranteed sound power level 86 dB(A)

Conformity Assessment:

Procedure in accordance with schedule 9. Product category: 33. Approved body no. 0359: Dekra Testing and Certification GmbH, Handwerkstrasse 15, 70565, Stuttgart, Germany.

Manufacturer Information

Robert Bosch Power Tools GmbH, 70538 Stuttgart, Germany

Represented by:

• Robert Bosch Limited, Broadwater Park, North Orbital Road, Uxbridge UB9 5HJ, United Kingdom

Signatories:

• Henk Becker, Chairman of Executive Management
• Helmut Heinzelmann, Head of Product Certification

Date of Issue: 23.05.2023