SGILE SEJ2301 Remote Control Robot Manual
This manual provides instructions for the SGILE SEJ2301 Remote Control Robot.
Safety Precautions
Please ensure children play under supervision. Review operating instructions with children before playing. Keep hands, hair, and loose clothing away from the robot's legs when the power switch is ON. Remove the battery from the toy when not in use.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
⚠️ WARNING: CHOKING HAZARD - Contains small parts. Not for children under 3 years.
WEEE Compliance
The ?️ (crossed-out dustbin) symbol indicates that batteries, rechargeable batteries, button cells, and battery packs should not be disposed of in household waste. Batteries can be harmful to health and the environment. Please help protect the environment by taking batteries to local collecting points for safe recycling.
When this appliance is out of use, please remove all batteries and dispose of them separately. Bring electrical appliances to local collecting points for waste electrical and electronic equipment. Other components can be disposed of in domestic refuse.
Safety Instruction of Battery Use
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries must be removed from the toy before being charged.
- Rechargeable batteries should only be charged by an adult.
- Batteries must be inserted with the correct polarity.
- Exhausted batteries should be removed from the toy.
- The supply terminals must not be short-circuited.
- Do not mix old and new batteries.
- Do not mix different types of batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
Care & Maintenance
- Use the original USB cable to charge the robot. Charging via computer is recommended.
- Do not expose the Robot to excessive physical shock.
- Do not expose the RC Robot and its battery to heat or dispose of it in a fire.
- Do not place the RC Robot in a microwave oven or in a pressurized container.
- Do not attempt to dismantle, pierce, distort, cut, or repair the battery.
- Do not place any heavy objects on the RC Robot.
- Do not clean the RC Robot with solvents, denatured alcohol, or other flammable solvents. When cleaning, ensure the power and charger are unplugged.
- Do not subject the RC Robot and its battery to large temperature variations.
- Do not place your RC Robot near a heat source.
- Disconnect the charger when you are not charging the robot.
Delivery Contents
The package includes:
- 1x The mini robot: A wheeled robot with large, expressive eyes and tank-like treads.
- 1x Transmitter: The remote control unit.
- 1x USB charging cable: For charging the robot's battery.
- 1x Instruction manual: This guide.
Charging the Robot
Please switch the robot OFF before charging. If the robot is ON, charging will be cut off automatically.
The charging indicator light on the robot will be ON while charging and will turn OFF after charging is finished.
The charging port is located on the back of the robot, near the power switch.
Battery Installation for Transmitter
To install batteries in the transmitter:
- Open the battery compartment by loosening the screw.
- Insert 2 AA batteries (not included) into the compartment, observing the polarity markings (+ and -) inside.
- Replace the battery compartment cover and secure it with the screw.
TIPS! Best performance is obtained by using new alkaline batteries.
Remote Controller Operation
The remote controller allows you to operate the robot:
- ON/OFF Switch: [⏻] Controls the power for the robot.
- Directional Buttons:
- Forward: [▲]
- Backward: [▼]
- Turn Left: [◀️]
- Turn Right: [▶️]
- Sound Switch: [?] Controls sound effects.
- DEMO Button: Activates demonstration mode.
- Song Button: [?] Plays music.
- Light Control (Normal version): Press to make the robot's lights twinkle, turn on, or turn off.
- Emoji Control (Emoji version): Short press to change the robot's emoji display. Long press to enter emoji demonstration mode.
Compliance Information
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- (1) This device may not cause interference.
- (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
French: Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux RSS exemptés de licence d'Innovation, Sciences et Développement économique Canada. L'exploitation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l'appareil. l'appareil numérique du ciem conforme canadien CAN ICES-3 (B)/NMB-3(B).
Manufacturer Information
EASTWEST ELECTRONIC COMMERCE CO., LIMITED | LEVEL 54 HOPEWELL CENTRE 183 QUEEN'S ROAD EAST HONG KONG
EASTWEST ELECTRONIC COMMERCE CO US LIMITED | 3500 SOUTH DUPONT HIGHWAY, SUITE G106 DOVER, DE 19901 UNITED STATES
LIFEWIT LIMITED | FLAT 237, 233 HIGH STREET CROYDON SURREY ENGLAND CR0 1FY UNITED KINGDOM
Lifewit GmbH | Friedenstraße 5 97072 Wuerzburg Germany
Batch No.: 20230725019
MFG: 20230725
Made in China
[UKCA Mark] [CE Mark] [FCC Mark] ♻️ [RoHS Compliant] ?️
