Instruction Manual for sycamore LED com models including: SY9036SINGLE Tunable LED Bathroom Mirror Cabinet, SY9036SINGLE, Tunable LED Bathroom Mirror Cabinet
Calgary Single Tunable LED Mirror Cabinet - Sycamore Lighting Ltd
Calgary Double Tunable LED Mirror Cabinet - Sycamore Lighting Ltd
File Info : application/pdf, 2 Pages, 617.48KB
DocumentDocumentInstallation instructions : SY9036SINGLE/DOUBLE--Tunable LED Bathroom Mirror Cabinet Thank you for purchasing this SycamoreLED.com product. Please make sure instructions are followed carefully prior to and during installation and product is not altered, otherwise warranty may not be valid. For technical support or warranty information please visit www.sycamoreLED.com, or call our dedicated technical helpline +44 (0) 113 2866686. IMPORTANT--Please read prior to installation 1) Please read these instructions carefully before commencing any work 2) Please retain these instructions for future reference 3) This unit must be installed by a qualified electrician in accordance with the IEE wiring regulations and building regulations 4) To prevent electrocution switch the power off at the mains supply before installing or maintaining this fitting 5) Ensure others cannot restore the electrical supply without your knowledge CONTENTS & TOOLS REQUIRECDONTENTS & TOOLS REQUIRED BATHROOM REGULATIONS This product is IP44 rated and is suitable for installation in Zone 2 & Outside Zones X8 A X8 X3 X2 INSTALLATION INSTRUCTIONS B INSTALLATION INSTRUCTIONS (CONT) C D F E Colour Temperature (CCT) Change and Dimming To select the preferred CCT, press the button on front of mirror to turn the light on/off until the correct CCT is achieved. (2700K/4000K/6500K) The mirror will remember the chosen CCT next time the mirror is switched on. (as long as the setting was on longer than 10 seconds when last on). To dim the light, hold down the button until the desired bright- ness is achieved. Demister Function Touch the button on the front of the mirror to turn the demist- er on/off. Demister will switch off automatically after 30 minutes. Shaver Socket Rated voltage:220-240V,50-60Hz Rated current:85mA The maximum wattage for the shaver socket is 19.2W.. USB Charging Port ·5V 2A CARE IN USE · Please note this fitting has non replaceable parts · Always switch off or disconnect from the mains when cleaning the product. · We recommend cleaning with a soft dry cloth. Do not use scourers, abrasives or chemical cleaners. · Do not allow moisture to come into contact with electrical parts · This luminaire should not be disposed of with normal household rubbish. When a replacement is purchased, this luminaire shoul d be returned to the retailer to safely dispose of (WEEE Directive effective July 2006--Waste from Electrical & Electronic Equipment) This product contains a light source of energy efficiency class F SycamoreLED.com LS26 8XT