Instruction Manual for CLAUDGEN models including: HE8408 Remote Control Unit, HE8408, Remote Control Unit

Oliver Kucyj

INSTALLATION INSTRUCTIONS FOR Remote Control Unit

INSTALLATION INSTRUCTIONS FOR Remote Control Unit Catalogue Number HE8408 Overview The remote-control switch box HE8408 is for use with single/three-phase screenzone heaters.

HE8408 user instructions

HE8408 Remote Control Unit | Consort Claudgen

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 413.57KB

Document Document

INSTALLATION INSTRUCTIONS FOR
Remote Control Unit
Catalogue Number HE8408
Overview The remote-control switch box HE8408 is for use with single/three-phase screenzone heaters. The unit comprises of one 10A double pole switch and three 10A switches in a surface mounting box, 166 mm x 86 mm x 40 mm deep. Wiring the HE8408 to your heater The wiring for the HE8408 is not the same on all heaters. Figure 1 shows the wiring of the HE8408 for the RAC1306, RAC1309, RAC1509, RAC1512, HE8326, HE7433 and all heaters from the CA range. Figure 2 shows the wiring of the HE8408 for the RAC10HL, RAC15HL and the RAC20HL. For safety reasons, a sound earth connection must always be made to the unit before use.

Figure 1

Figure 2
Consort Equipment Products Limited Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT
Tel: 01646 692172 Fax: 01646 695195
BS EN ISO 9001 Registered Company No FM12671

41001532