heath.com domain name may be for sale
One moment, please...One moment, please...Custom Control - Allen & HeathOne moment, please...
Instruction Manual for ALLEN HEATH models including: CC-7, CC-10, CC-7 Touch Panels, Touch Panels, Panels
AP12698 2 CC-7 CC-10 Touch Panels Getting Started Guide Issue 2 | Allen & Heath
CC-7, CC-10 Getting Started Guide AP12698 Issue 2 CC-7, CC-10 CC-7 and CC-10 are touch panels for desktop or wall mount use, configured to
File Info : application/pdf, 5 Pages, 191.55KB
DocumentDocumentCC-7, CC-10 CC-7 and CC-10 are touch panels for desktop or wall mount use, configured to run the Allen & Heath Custom Control app in kiosk mode. Check content Check that you received the following: · Touch panel CC-7 or CC-10 · 12V power supply unit · Safety sheet Installation CC-7 and CC-10 have threaded inserts for standard VESA 75x75mm mounting. Allen & Heath can provide a desktop stand (part number CC-STN) and a wall/glass mount bracket (part number CC-BRK). Overview 1 CC-10 2 3 4 2 1 CC-7 CC-7, CC-10 Getting Started Guide 3 4 AP12698 Issue 2 1. Power button Short press for sleep / wake up. Long press to power down / reboot. A confirmation dialog box is displayed on the screen. 2. DC Input and LED indicator 12V/2A DC input. Alternatively, the unit can be powered over Ethernet. Only use the PSU supplied with the touch panel. The LED indicator lights up green when the unit is powered and red when the unit is in sleep mode. 3. USB-A port USB 2.0 port for Custom Control updates. 4. Ethernet port PoE enabled, Gigabit Ethernet RJ45 port for connection to the mixing system. Operation The touch panels are configured to launch the Custom Control app at power up and in kiosk mode, hiding the OS status / notification bar and navigation bar, and preventing end users from exiting the app, thus securing the settings and operation of the touch panel. At power up, wait until the Custom Control login screen is displayed. Select a system from the list or enter the target IP address, enter the Username and Password, and touch Connect. Swipe right from the left border to access further app settings such as Auto Login. The Custom Control app downloads and displays a custom user interface from a compatible Allen & Heath system. The interface is created and uploaded using the Custom Control editor. For more information on Custom Control, please refer to the Allen & Heath website and the app Help. CC-7, CC-10 Getting Started Guide AP12698 Issue 2 Configuration An installer, integrator or system admin can exit the app to change the touch panel settings such as IP address or brightness, or to update the software. Swipe right from the left border to access the app settings and touch Quit. Enter the factory unlock PIN code: 8789. The Settings app gives access to several settings for the touch panel, for example: · Network settings select Ethernet and enter a static IP address, subnet mask and gateway if required. Factory default is automatic IP address (DHCP). · Scheduled sleep select Schedule / Set Scheduled sleep On/Off Clocks and set the Time and Repeat options as desired. · Language select System / Language & Input. This applies to the Android OS only, not to the Custom Control app. To adjust the brightness of the screen, swipe down from the top of the screen, touch Brightness and slide the control to adjust. Auto adjusts the brightness automatically based on the ambient light. Software updates To update the Custom Control app: · Download the kiosk version of the app from www.allenheath.com/custom-control/ and store the CustomControllerApp32k.apk installer file on a USB drive. · Insert the USB drive into the USB port of the touch panel. · Exit the app as described in the section above, open the Files app, locate and launch the .apk installer. · Follow the instructions on screen. CC-7 and CC-10 require the kiosk version of Custom Control, V1.20 or higher. Only install updates from the Allen & Heath website. Do not use the public version of the Custom Control app from the Google Play store. Check www.allen-heath.com for the latest version of the Custom Control kiosk app and any updates for the CC-7 and CC-10 panels. CC-7, CC-10 Getting Started Guide AP12698 Issue 2 Specifications Power and Temperature DC Input Operating Temperature Range PoE Requirements +12V DC 2A 0°C to 40°C (32°F to 104°F) 802.3af 15W Dimensions CC-7 CC-7, CC-10 Getting Started Guide AP12698 Issue 2 Dimensions CC-10 A limited one year manufacturer's warranty applies to this product, the conditions of which can be found at: www.allen-heath.com/legal. Copyright © 2022 Allen & Heath. All rights reserved. ALLEN&HEATH Allen & Heath Limited, Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK http://www.allen-heath.com CC-7, CC-10 Getting Started Guide AP12698 Issue 2