SHARP AQUOS R8s pro

Part Names

Note: Parts generating magnetism (Earpiece, Speaker, Camera, Vibrator) are used. Keep metal pieces away to prevent injury.

Recommendation: Charge the battery for at least 30 minutes before starting up the device for the first time.

Important Information

Prohibited Actions

• Do not charge the device when wet with water or other liquids (e.g., sweat, sea water).
• Do not charge the device in wet locations (e.g., bathroom).

Handling and Usage

• The device has security features to prevent unauthorized software changes.
• Designed for Singapore; check local laws if used overseas. Supports roaming in Asia; check carrier for charges.
• Warning: Do not place sharp objects on the screen; they may scratch it.
• Warning: Do not drop the device or subject it to severe impacts. Bending the body or pushing the display/keys with extreme force could damage it.
• Warning: Do not use pens or sharp objects to tap the screen.
• Avoid dusty or dirty environments.

Operating Environment

• Recommended Temperature: 5 °C ~ 35 °C
• Recommended Humidity: 35%~85%
• Charging Temperature: 5 °C ~ 35 °C (Battery performance may deteriorate or leak/overheat outside this range).
• Do not place on uneven or unstable surfaces.
• Do not insert foreign objects into the device.
• Avoid strong magnetic or electrical fields.
• Do not expose to high temperatures, such as near open flames or heat-emitting equipment.
• Do not submerge in liquids other than tap water (e.g., seawater, pool water, hot springs, soapy water, alcohol, soft drinks). If it gets wet, immediately rinse with tap water.

Charging and Power

• Use only the provided charger that meets the device's rating.
• The device temperature may rise during intensive tasks; charging will stop automatically if the temperature exceeds a predefined threshold.
• The charger is not waterproof.
• The charger may become hot during charging; avoid prolonged contact with your body.
• Do not place metal objects between the wireless charger and the device.
• Wireless reverse charging is based on Qi-standard, but charging is not guaranteed for all devices.

Cleaning

• Disconnect the device from power before cleaning.
• Never attempt to connect or disconnect the charger with wet hands.
• Clean the touch screen with a soft cloth, slightly dampened if needed. Never use abrasives or cleaning solutions.

Repair and Disposal

• Warning: Do not disassemble the device. Only certified service technicians should perform repairs.
• Dispose of electronic products properly according to local authority or retailer guidance.

Connectivity and Features

• For USB connection, use a USB 2.0 (or higher) cable.
• Install the charger near the equipment and ensure it is easily accessible.
• Use low-power Bluetooth hands-free systems (headphone, headset). Keep calls short or use text messages.
• People with active medical implants should keep the device at least 15 cm away from the implant.
• Actual user storage capacity is less than advertised due to the operating system and software. Capacity may change with software updates.
• Face recognition security is lower than other lock methods and recognition rate is not 100% accurate.
• The device uses an OLED display; displaying the same image for long periods may cause afterimages (not a malfunction). Avoid continuous display of the same image.
• Fingerprint recognition may cause slight changes in screen brightness and color settings.

Note: The charger refers to both AC charger and wireless charger.

Compliance Information

Network Bands:

• LTE FDD: B1/B3/B7/B8/B28
• LTE TDD: B38
• 5G: n1/n40/n78

Connectivity:

• Wi-Fi: IEEE 802.11 a/b/g/n/ac/ax (2.4 GHz/5 GHz/6 GHz)
• Bluetooth: 5.3
• NFC: Yes
• SIM: Dual SIM
• UWB: Yes

Waterproof/Dustproof Ratings:

• Waterproof: IPX5/IPX8
• Dustproof: IP6X

Contents of Accessories

• Quick Start Guide / Warranty Card (This document)
• AC charger
• USB Cable
• Protection Film
• Quick Switch Adaptor
• SIM Eject Pin

Made in China

Design Company: SHARP CORPORATION

Sales Company: SHARP Singapore Electronics Corporation Pte. Ltd.
438B Alexandra Road, #06-02 Alexandra Technopark, Singapore 119968

Complies with IMDA Standards DB00855

SAR Information

Your mobile device is a radio transmitter and receiver designed to comply with international radio wave exposure guidelines. These guidelines, developed by ICNIRP, include safety margins for all individuals.

The Specific Absorption Rate (SAR) limit for mobile devices is 2 W/kg. The highest SAR value tested for this device at the ear is 0.83 W/kg, and when worn on the body is 1.08 W/kg.

For body-worn operation, the device was tested using an accessory with no metal and positioned a minimum of 5 mm from the body. Compliance may vary with other accessories.

The actual SAR while operating is typically below the indicated value due to automatic power level adjustments. The World Health Organization states that current scientific information does not indicate a need for special precautions for mobile device use. To reduce exposure, limit call duration or use a hands-free device to keep the phone away from your head.

* Tests are conducted in accordance with international testing guidelines.

Laser (Proximity Sensor)

Do not stare into the proximity sensor. It may temporarily affect eyesight, leading to accidents.

This device is classified as a CLASS 1 LASER PRODUCT.

Volume Level Caution

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Warranty Card

Warranty Coverage

SHARP provides a Product Warranty Statement for legally authorized SHARP products purchased from SHARP or an authorized reseller. SHARP does not offer a worldwide repair warranty.

The warranty is for one year from the date of purchase, valid upon presentation of proof of purchase, covering failures under normal environmental conditions.

For natural damage or failure within the warranty period (not excluded by liability exclusions), SHARP will provide free "Repair Service." Repaired machines receive the same warranty period as the original purchase, which is not extended.

For products exceeding the warranty period or damaged by human error, a three-month warranty is provided for the same problem. "Repair Service" involves one-to-one part replacement to restore normal operation; replaced parts become SHARP property.

Warranty Period for Consumable/Expendable Items:

• Removable batteries: 6 months
• Non-removable batteries: 12 months
• Other accessories (cables, headphones, power adapters): 6 months

Disclaimer

The warranty is void if the serial number on the device casing is torn off or improperly altered. Unauthorized removal or alteration of identification labels on parts with serial numbers will also void the warranty on those parts.

Warranty Exclusions

SHARP Warranty does not apply under the following circumstances:

• Failure due to improper use, negligent operation, improper installation, maintenance, disassembly, or repair by unauthorized persons, or unauthorized modification using non-SHARP parts.
• Improper courier transportation (e.g., poor packaging, drop, or collision during delivery).
• Damage caused by natural or man-made disasters (e.g., typhoons, fires, floods, lightning).
• Damage caused by accidents (e.g., liquid splashing, chemicals, high temperature, voltage surge, poor power supply).
• Damage from natural wear and tear, third-party software issues, or virus/malware.
• System instability or security risks resulting from users modifying the system files or using unofficial ROM system updates.

SHARP Liability Limitations

SHARP does not provide data rescue or backup services and is not responsible for data loss.

SHARP may inspect products for out-of-warranty repairs or replacements, which will be charged. Return shipping and repair costs are the customer's responsibility.

SHARP shall not be liable to the purchaser for any damages or losses arising out of the use of this product series, including loss of business, profits, or use.