User Manual
Step 1: App Download and Registration
Scan the QR code to download the APP.
[QR Code Image]
Select "register now", select the corresponding region, and enter the account number and password to complete the registration.
Step 2: Add Device
Open the app, log in to the account, and click "Add devices".
Choose "WiFi camera" and then "Networking mode of scanning app QR code".
Enter the correct WiFi password. Ensure the password is entered correctly, otherwise the device cannot be added successfully. Some devices do not support 5G and 2.4G/5G mixed mode network; you can click "Switch network".
Face the QR code to the camera and keep a distance of 15-20cm.
[QR Code Image]
If you hear the tone, click "Hear the tone".
Use the camera to scan the QR code generated by the mobile phone and keep it at about 20cm.
Step 3: Device Binding
Click "Bind now" to bind the device. The camera name is displayed as "Camera"VP0018478DXZO"Need to bind?". The WiFi camera name is "WiFi Camera01".
Step 4: Device Sharing
Select "System settings" and then "Device sharing".
Select "Share pictures". A QR code will be displayed for sharing.
[QR Code Image]
Open App, click on "+" in the home page to scan the QR code and add the device. This is valid for 30 minutes. One QR code can only be added by one user.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
