TOGRAN Wireless Keyboard and Mouse User Manual

Welcome

Thank you for choosing this wireless product. To ensure optimum performance and safety, please read these instructions carefully before operating this product. It is strongly recommended you keep this manual for future reference.

If you have any issues, please reach out to: cs.btios@hotmail.com

Package Contents

• 1 x Wireless Keyboard MK255
• 1 x Wireless Mouse TM250G
• 1 x User Manual

Keyboard Product Specifications

• Key Type: Crater keys
• Battery Type: 2*AAA battery
• Interface: USB 2.0, Plug & Play, no driver required
• Compatibility: Win XP, Win Vista, Win7, Win8, Win8.1, Win 10, Mac
• Operating Voltage: 3V
• Operating Current: 5mA
• Sleeping Current: 0.11mA
• Sleeping Time: 6 minutes
• Keystroke: 50±5gf
• Key life: 10 million key strokes
• Dimension: 410*115*22mm
• Weight: 356g

Keyboard Instructions

The wireless keyboard uses two AAA batteries (not included). Open the battery compartment cover. Install the batteries, ensuring correct polarity (+/-).

Keyboard Re-pairing Method:

1. Unplug the USB receiver.
2. Press "Esc" + "=". The keyboard light will turn on.
3. Plug the USB receiver into the USB port. Keep the keyboard and USB receiver within 20cm. The light will turn off if successfully paired.

IMPORTANT NOTE: Complete step 2 within 10 seconds of pressing "ESC" + "=".

Mouse Product Specifications

• Working Frequency: 2.4GHz
• Operation Voltage: 1.5V
• Battery Type: 1 AA battery
• Current Dissipation: 1.5V-14mA
• Standby Current: 0.5-2.0mA
• Sleeping Current: <0.1mA
• Sleeping Time: 15 Minutes
• DPI Resolution: 1400
• Working Distance: ≤10M
• Key Life: 3 million
• Dimension: 111*60*29mm
• Weight: 58g

Mouse Installation

1. Follow the arrow to push the battery cover out.
2. Insert an AA battery into the battery case correctly.
3. Take out the USB receiver.
4. Push in the battery cover to close the case.
5. Plug the USB receiver into a USB port.
6. Turn on the switch at the bottom of the mouse.

Mouse Re-pairing Method:

Press and hold the left key + center key + right key to re-connect.

Functional Zone (Keyboard)

Press the "Num Lock" button. The "1" LED will turn off, and the numeric zone will change to the functional zone.

• Number "2", "4", "6", "8": Navigate down, left, right, up.
• Number "1", "3", "7", "9": "End", "Page Down", "Home", "Page Up".
• Number "0": "Insert".
• Decimal point: "Delete".

Combined Keys (Keyboard)

• FN + F1: Music Playback Control (Previous Track)
• FN + F2: Music Playback Control (Next Track)
• FN + F3: Volume Up (+)
• FN + F4: Volume Down (-)
• FN + F5: Mute
• FN + F6: Play/Pause ▶️
• FN + F7: Stop ⏹️
• FN + F8: Browser ?
• FN + F9: Mail ✉️
• FN + F10: Computer ?
• FN + F11: Favorites ⭐

LED Indicators (Keyboard)

• Num Lock Indicator: Shows Red when the numeric zone is active and the functional zone is off.
• Caps Lock Indicator: Shows Red when Caps Lock is active.
• Low Power Indicator: Flashes when battery voltage is below 2.2V.

About After-Sales

• 12 Months Warranty
• For any problems, please contact: cs.btios@hotmail.com

FCC Caution

§ 15.19 Labelling requirements.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

§ 15.21 Information to user.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

§ 15.105 Information to the user.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

* RF warning for Portable device:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Manufacturer Information

TOGRAN (东莞市铭冠电子科技有限公司)

Address: [Manufacturer Address Not Provided]

Website: [Manufacturer Website Not Provided]

Compliance Notes:

• Complies with TOGRAN's inspection standards: T-WQ-007 (Keyboard), TG-WQ-008 (Mouse), TG-WQ-005 (Headset).
• Meets reliability testing management regulations: TG-WG-004 (Keyboard & Mouse), TG-WQ-006 (Headset).
• Adheres to TG-HSF-300 environmental requirements.
• Complies with company's latest environmental standards including Reach and RoHS.