경우시스테크
User Manual for KYUNGWOO models including: SMK-DWS-01, SMKDWS01, ZE8-SMK-DWS-01, ZE8SMKDWS01, Smart Key Fob, Smart Fob, Key Fob
KYUNGWOO SYSTECH INC. SMK-DWS-01 SMK FOB ZE8-SMK-DWS-01 ZE8SMKDWS01 smk dws 01
File Info : application/pdf, 7 Pages, 428.74KB
DocumentDocumentSMART KEY FOB User' Manual Prepared() Park jeguk 2022.10.12 Reviewed() Approved() www.kyungwoo.com Copyright © 2014 Kyungwoo Systech Inc. SMART KEY FOB USER'MANUAL Rev (1.0) Revision History Rev. 1.0 2018.12.26 First Release 2.0 2022.08.10 Correct Frequency (433MHz -> 433.92MHz, 134KHz -> 133KHz) Bae wonsik Park jeguk www.kyungwoo.com Copyright © 2014 Kyungwoo Systech Inc. Pages 2 / 7 Revision History 1. Synopsis 2. Product Image 3. Block Diagram 4. Specification Contents SMART KEY FOB USER'MANUAL Rev (1.0) www.kyungwoo.com Copyright © 2014 Kyungwoo Systech Inc. Pages 3 / 7 SMART KEY FOB USER'MANUAL Rev (1.0) 1. Synopsis This document is specifically-written manual for receiver and transmitter (SMART KEY FOB) of wireless communication, which is to confirm user identifications under engine-start limiting function in heavy equipments. SMART KEY FOB is defined as following: it receives signals with RFID 133 KHz and wakes up. After then, it transmits password-secured information to SMART KEY CONTROLLER by using 433.92MHz wireless signals. WARNNIG Exchanging batteries in incorrect way, It may cause explosion Discard used batteries according to manufacturer's instructions 2. Product Image 1) External Appearance 2) Dimension www.kyungwoo.com Copyright © 2014 Kyungwoo Systech Inc. Pages 4 / 7 3) Certification LABEL location 4) Block Diagram SMART KEY FOB USER'MANUAL Rev (1.0) 4. Specification 4.1. Operating Specification -. Must wake up the remote control by providing electricity with RFID 133 KHz. -. Must be operating with CR2032 battery. -. Must be able to transfer password-secured signals. -. Must be able to use Single channels band of 433.92MHz. 4.2. Power Specification -. 3 V d.c. (CR 2032 Lithium Battery) -. Notice : Inserting opposite polarity of battery may cause explosion or damage to product (Please match battery polarity with battery holder) www.kyungwoo.com Copyright © 2014 Kyungwoo Systech Inc. Pages 5 / 7 SMART KEY FOB USER'MANUAL Rev (1.0) 4.3. General Specification -. Storage Temperature: -30 ~ 80 -. Operating Temperature: -20 ~ 60 -. Wireless Tested Temperature : -20 ~ 60 -. Water-Proof Specification: IP54 (Living Water-Proof) -. Material of Device : PC (Material: 1220r, Flame Class : V2, Manufacturer : Lotte Chemical) PC&ABS (Substance : LUPOY GN-5001RF BLACK, Flame Class : V0, Manufacturer : LG CHEMICAL) TPE (Material: TC5MGA-S340) ZNP (Material: DC2, Manufacturer : ) -. PCB Material : object/part No. manufacturer/ trademark SMK TAG B/D PCB JM ELECTRONICS CO LTD Layer /Thickness 2Layer /0.8T Flame Class V-0 standard UL 796 mark(s) of conformity1) 4.4 RF Specification Wireless Data Communication System Magnetic Induction System Item Frequency RF Power Modulation Method Tested Temperature Frequency RF Power Modulation Method Specification 433.92MHz (Single Channel) Under 1 mW GFSK -20 ~ +60 133KHz (Single Channel) Receive Only ASK 4.5. Product label Explanation of graphic symbols used Symbol Description Korea Certification Marking Communaute Europeenne Marking Electrical waste and electronics equipment Direct current www.kyungwoo.com Copyright © 2014 Kyungwoo Systech Inc. Pages 6 / 7 SMART KEY FOB USER'MANUAL Rev (1.0) 5. Postal address: Kyungwoo Systech Inc. Office: +82-2-985-8085 #401, Daeryung Post Tower 5, 68, Digital-ro 9, Geumcheon-gu, Seoul, South Korea E-mail: Webmaster@kyungwoo.com This equipment is not suitable for use in locations where children are likely to be present. FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RED Compliance Statement This product is CE marked according to the provision of the RED (2014/53/EU). Hereby Kyungwoo Systech Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU www.kyungwoo.com Copyright © 2014 Kyungwoo Systech Inc. Pages 7 / 7