SIGMA ROX 11.1 EVO Short Manual

Product Overview

The SIGMA ROX 11.1 EVO is a cycling computer designed to track your rides, provide navigation, and connect with various sensors. It offers a user-friendly interface and comprehensive training features.

Key Features:

• GPS tracking
• ANT+ and Bluetooth connectivity
• Heart rate and cadence sensor compatibility
• Training session management
• Navigation capabilities
• SIGMA RIDE App integration

Included in Sets:

• ROX 11.1 EVO unit
• HR SET (Heart Rate Sensor)
• SENSOR SET (Speed/Cadence Sensor)

For detailed instructions and videos, visit: goto.sigmasport.com/rox11-1

Installation and Setup

Mounting the Device:

The ROX 11.1 EVO can be mounted on the handlebar using the provided mount. Ensure it is securely attached.

Connecting Sensors:

Heart Rate Sensor:

• Attach the sensor to the chest strap.
• To change the battery: Open the cover (1), insert a new CR2032 battery (2), close the cover (3), and secure it (4).

Speed/Cadence Sensor:

• Remove the sticker from the sensor.
• The LED will flash blue.
• The SPEED sensor can be mounted on the bicycle hub of either wheel.

First Start and Smartphone Pairing:

1. Press the MENU button for 5 seconds to wake up the device.
2. Press the START button to pair your smartphone.
3. Download the SIGMA RIDE App and follow the app's instructions to configure your device.
4. Alternatively, press the '+' button to set up the device manually.
5. Pair your sensors to complete the initial setup.

E-Bike Connection:

• Navigate to Main Menu > Settings > Connect > E-Bike.
• Ensure your E-Bike is switched on.
• Select your E-Bike using the '+' or '-' buttons and press START to pair.
• Choose the eBIKE Sport Profile for relevant eBIKE values.

Button Functions

• MENU Button: Switch the device on/off (press for 3s), open/close the menu.
• START/ENTER Button: Start/continue training, confirm input, move down one menu level, take manual lap.
• STOP/BACK Button: Stop training, save training after finish, move up one menu level.
• '+' Button: Go to the next page, move down in lists, increase value.
• '-' Button: Go to the previous page, move up in lists, decrease value.

Training

1. Press the MENU button for 3s to switch on the device.
2. Wait for the "GPS OK" message. For a quick GPS fix, find a clear sky and stay still.
3. Press START to begin the training session.
4. Press STOP to end the training session.
5. Press STOP again to save the training session, or press START to continue the session.
6. Press STOP to exit the summary.
7. Use your smartphone and the SIGMA RIDE App to sync your training for detailed analysis and sharing.

Menu Overview

Main Menu: Accessible by pressing the MENU button when training is not started. Provides access to all device functions.

Short Cut Menu: Accessible by pressing the MENU button when training is active or in auto-pause. Allows quick access to important settings while riding.

Sensor Connection

1. In the MAIN MENU, navigate to SETTINGS > CONNECT to manage connections.
2. Select SENSORS to pair new sensors or manage existing ones.
3. Choose SEARCH NEW to add new sensors.
4. Ensure sensors are switched on.
5. Press START to pair the sensor.

Tip: Sensors are available via Bluetooth and ANT+. SIGMA recommends using the ANT+ connection.

SIGMA RIDE App

The SIGMA RIDE App allows you to:

• Set up device and training views.
• Update firmware.
• Analyze your training data.
• Share your data.
• Manage navigation tracks.

Tip: Regularly check for firmware updates at goto.sigmasport.com/rox11-1-updates.

Charging and Data Transfer

1. Open the USB cover.
2. Insert the USB-C cable. Ensure the cable and port are dry.
3. Charge the device with a 5V power source, up to 1000mA.
4. Connect to a PC for data transfer.

Important: Ensure the USB cover is always closed before starting a training session.

Technical Information

• Battery Type: Rechargeable 1000 mAh / 3.7 Wh Battery
• Maximum Operating Altitude: 5000 m
• Operation Temperature: 0 °C to 40 °C
• Operation Frequency: ANT+ 2.4 GHz, Bluetooth 2.4 GHz, GPS 1575.42 MHz, GLONASS 1602 MHz, Galileo 1575.42 MHz
• Transmission Power: <4 dBm
• Water and Dust Rating: IP67

E-LABELING: For FCC and IC regulatory information, navigate to Main Menu > Info. The CE declaration can be found at: ce.sigmasport.com/rox111.