Led dimmer and RGB controller for professional lighting systemsLed dimmer and RGB controller for professional lighting systems
Device Manual for Wired4Signs models including: DLX1224-4CC500-DALI RGBW 4 Ch Constant Current LED Controller, DLX1224-4CC500-DALI, RGBW 4 Ch Constant Current LED Controller, 4 Ch Constant Current LED Controller, Constant Current LED Controller, Current LED Controller, LED Controller, Controller
RGBW 4-Ch Constant Current LED Controller with DALI (350mA) ~ Model DL – Bricodex
RGBW 4-Ch Constant Current LED Controller with DALI (350mA) ~ Model DL
File Info : application/pdf, 13 Pages, 1.04MB
DocumentDocumentDLX1224 BUS multi channel EASY
Device Manual
Made in Italy
Rev. 2021-11-10 Pag.1 / 13
FEATURES
· BUS+SEQUENCER+FADER+DIMMER+DRIVER · DC Input 12-24 Vdc · Bus command: DMX512+RDM or DALI · Local command: Stand alone function (Dip Switch settings) · Control: RGB or RGBW Colour · Current outputs or voltage outputs for LED strip · Typical efficiency > 95% · Adjusting the brightness up to completed off · Soft start and soft stop · Optimized output curve · Extended temperature range · 100% Test functional 5 Years warranty
For the whole and update Device Manual refer to producer's website: http://www.dalcnet.com
CONSTANT CURRENT VARIANTS (common anode)
Application (4 channels output): RGB+W
CODE DLX1224-4CC350-DMX DLX1224-4CC350-DALI DLX1224-4CC500-DMX DLX1224-4CC500-DALI
Supply Voltage 12-24V DC 12-24V DC 12-24V DC 12-24V DC
Output 4x350mA 4x350mA 4x500mA 4x500mA
Channels 4 4 4 4
Command DMX DALI DMX DALI
EASY EASY EASY EASY
CONSTANT VOLTAGE VARIANTS (common anode)
Application (4 channels output): RGB+W
CODE DLX1224-4CV-DMX DLX1224-4CV-DALI
Supply Voltage 12-24V DC 12-24V DC
Output 4 x 5A (max 10A tot.) 4 x 5A (max 10A tot.)
Channels 4 4
Command DMX DALI
EASY EASY
PROTECTIONS
OVP Over voltage protection1
UVP Under voltage protection1
RVP Reverse polarity protection1
IFP
Input fuse protection1
CC
CV
1 Only control logic protection
DISTRIBUTED BY +1 (865) 339 4956 7669 Clinton Highway, Wired 4 Signs USA info@w4susa.com Powell, Tennessee, 37849
DLX1224 BUS multi channel EASY
Device Manual
REFERENCE STANDARDS
Made in Italy
Rev. 2021-11-10 Pag.2 / 13
EN 61347-1 EN 55015 EN 61547 EN 50581
IEC/EN 62386-101 IEC/EN 62386-102 IEC/EN 62386-207 ANSI E1.11
ANSI E1.20 -
Lamp controlgear - Part 1: General and safety requirements Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment Equipment for general lighting purposes - EMC immunity requirements Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances Digital addressable lighting interface - Part 101: General requirements - System Digital addressable lighting interface - Part 102: General requirements - Control gear Digital addressable lighting interface - Part 207: Particular requirements for control gear LED modules (device type 6) Entertainment Technology - USITT DMX512-A - Asynchronous Serial Digital Data Transmission Standard for Controlling Lighting Equipment and Accessories Entertainment Technology-RDM-Remote Device Management over USITT DMX512 Networks MODBUS APPLICATION PROTOCOL SPECIFICATION V1.1b
TECHNICAL SPECIFICATIONS
Supply voltage Output voltage Input current Output current2 Nominal power2
Power loss in standby mode Type of Load D-PWM dimming frequency D-PWM resolution D-PWM range Storage Temperature Ambient Temperature Maximum Temperature at Tc
Wiring Wire preparation length Protection grade Casing material Packaging unit (pieces/unit) Mechanical dimensions Packaging dimensions Weight
@12V @24V
Variant
Constant current
Constant voltage
4 channels
4 channels
DC min: 10.8 Vdc .. max: 26.4 Vdc
min: Vin/4 max: Vin-0,9V
=Vin
max 2 A
max 10 A
350mA/ch 1,4A tot 500mA/ch 2A tot
5A/ch
10A tot3
4,2W/ch 16,8W
6W/ch
24W
60W/ch
120W
8,4W/ch 33,6W
12W/ch
48W
120W/ch
240W
<500mW
<500mW
R-L-C
R
250Hz
16 bit
0,1 100 %
min: -40 max: +60 °C
min: -10 max: +40 °C
55°C4 (variant at 350mA)
70°C5 (variant at 500mA)
-
2.5mm2 solid 1.5mm2 stranded 30/12 AWG
5,5 6,5 mm
IP20
Plastic
Single Carton Box 1pz
Carton Box 12pz
88 x 54 x 26 mm
106 x 59 x 36 mm
263 x 178 x 82 mm
74g
900g
2 Maximum value dependent on ventilation conditions 3 For the voltage version the device provides max 10A (Itot= IL1 + IL2 +IL3 +IL4). Each channel provides max 5A. 4 Tc=55°C with Ta=40°C. At an ambient temperature of Ta=20°C Tc=35°C 5 Tc=70°C with Ta=40°C. At an ambient temperature of Ta=20 ° C Tc=50 ° C
DISTRIBUTED BY +1 (865) 339 4956 7669 Clinton Highway, Wired 4 Signs USA info@w4susa.com Powell, Tennessee, 37849
DLX1224 BUS multi channel EASY
Device Manual
INSTALLATION
To set the product, follow the instruction on the picture below: 1) Connect the LED in the output terminal blocks "OUT" of the device. 2) Connect the BUS (DALI or DMX) to the terminal blocks. 3) Connect the power supply (12-24 Vdc) to terminal blocks "DC IN" of the device
Made in Italy
Rev. 2021-11-10 Pag.3 / 13
Tc Point
TEST POINT FOR CODE: DLX1224-4CC350-xxx
TEST POINT FOR CODE: DLX1224-4CC500-xxx
DISTRIBUTED BY +1 (865) 339 4956 7669 Clinton Highway, Wired 4 Signs USA info@w4susa.com Powell, Tennessee, 37849
DLX1224 BUS multi channel EASY
Device Manual
MECHANICAL DIMENSIONS
Made in Italy
Rev. 2021-11-10 Pag.4 / 13
TECHNICAL NOTES
Installation: · Installation and maintenance must be performed only by qualified personnel in compliance with current regulations. · The product must be installed inside an electrical panel protected against overvoltages. · The product must be installed in a vertical or horizontal position with the cover / label upwards or vertically; Other positions are not permitted. It is not permitted to bottom-up position (with the cover / label down). · Keep separated the circuits at 230V (LV) and the circuits not SELV from circuits to low voltage (SELV) and from any connection with this product. It is absolutely forbidden to connect, for any reason whatsoever, directly or indirectly, the 230V mains voltage to the bus or to other parts of the circuit.
Power supply: · For the power supply use only a SELV power supplies with limited current, short circuit protection and the power must be dimensioned correctly. In case of using power supply with ground terminals, all points of the protective earth (PE = Protection Earth) must be connected to a valid and certified protection earth. · The connection cables between the power source "low voltage" and the product must be dimensioned correctly and they should be isolated from every wiring or parts at voltage not SELV. Use double insulated cables. · Dimension the power supply for the load connected to the device. If the power supply is oversized compared with the maximum absorbed current, insert a protection against over-current between the power supply and the device. · For the constant current output, the voltage of LED module (Vf) must be less of 5V at the voltage of power supply.
Command: · The length of the connection cables at the BUS (DMX512, Modbus, DALI or other) use cables as per specification of the respective protocols and regulations and they should be isolated from every wiring or parts at voltage not SELV. Use double insulated shielded and twisted cables. · All the product and the control signal connect at the BUS (DMX512, Modbus, DALI or other) must be SELV (the devices connected must be SELV or supply a SELV signal)
Outputs: · The length of the connection cables between the product and the LED module must be less than 10m; the cables must be dimensioned correctly and they should be isolated from every wiring or parts at voltage not SELV. Is preferable to use shielded and twisted cables.
DISTRIBUTED BY +1 (865) 339 4956 7669 Clinton Highway, Wired 4 Signs USA info@w4susa.com Powell, Tennessee, 37849
DLX1224 BUS multi channel EASY
Device Manual
Made in Italy
Rev. 2021-11-10 Pag.5 / 13
STAND ALONE SETUP
Leds are managed by the DIP-SWITCH of the device.
Configuration Function 64 static colours
DIP-SWITCH
DIP 9 = OFF
DIP 10 = ON
Rainbow
To set the intensity levels:
LIVELLO 1st CHANNEL
DIP1 DIP2
100%
ON
ON
66%
OFF ON
33%
ON OFF
0%
OFF OFF
2nd CHANNEL DIP3 DIP4 ON ON OFF ON ON OFF OFF OFF
3rd CHANNEL DIP5 DIP6 ON ON OFF ON ON OFF OFF OFF
4th CHANNEL DIP7 DIP8 ON ON OFF ON ON OFF OFF OFF
DIP 8 = OFF
DIP 9 = ON
DIP 10 = ON
To set the intensity levels:
LEVELS
COLOURS
WHITE
DIP1
DIP2 DIP3
DIP4
100%
ON
ON ON
ON
66%
OFF
ON OFF
ON
33%
ON
OFF ON
OFF
0%
OFF
OFF OFF
OFF
Strobo
To set the time between two adjacent colour changes:
TIME
DIP 5
DIP 6
30 min.
ON
ON
15 min.
OFF
ON
6 min.
ON
OFF
1 min.
OFF
OFF
30 sec.
ON
ON
15 sec.
OFF
ON
6 sec.
ON
OFF
3 sec.
OFF
OFF
DIP 7 ON ON ON ON OFF OFF OFF OFF
DIP 8 = ON
DIP 9 = ON
DIP 10 = ON
To turn on the outputs:
LIVELLO
COLORI
BIANCO
100%
ON
ON
ON
ON
0%
OFF
OFF
OFF
OFF
To set the strobo frequency:
fps
DIP 5
10
ON
8
OFF
6
ON
5
OFF
4
ON
3
OFF
2
ON
1
OFF
DIP 6 ON ON OFF OFF ON ON OFF OFF
DIP 7 ON ON ON ON OFF OFF OFF OFF
DISTRIBUTED BY +1 (865) 339 4956 7669 Clinton Highway, Wired 4 Signs USA info@w4susa.com Powell, Tennessee, 37849
DLX1224 BUS multi channel EASY
Device Manual
BUS DALI SETUP
Leds are managed by a DALI controller.
FEATURES · DALI BUS
Made in Italy
Rev. 2021-11-10 Pag.6 / 13
DALI PROTOCOL REFERENCE STANDARDS
IEC/EN 62386-101 IEC/EN 62386-102 IEC/EN 62386-207
Digital addressable lighting interface Part 101: General requirements- System
Digital addressable lighting interface Part 102: General requirements- Control gear
Digital addressable lighting interface Part 207: General requirements- LED modules (device type 6)
CONFIGURATION
ADDRESSING
By selectors
Random Address Allocation
DISTRIBUTED BY +1 (865) 339 4956 7669 Clinton Highway, Wired 4 Signs USA info@w4susa.com Powell, Tennessee, 37849
Function DALI Random Address Allocation
DLX1224 BUS multi channel EASY
Device Manual
Made in Italy
Rev. 2021-11-10 Pag.7 / 13
DIP-SWITCH
Addressing managed DALI BUS. All DIPS are OFF.
DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6 DIP 7 DIP 8 DIP 9 DIP 10 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
Manual addressing [0..63]
Manual Addressing DIP 10 = OFF Address DALI from 0 to 63 = (1*dip1 + 2*dip2 + 4*dip3 + ... + 64*dip7) 1 See the following table to set the address. In the table: - value 1 corresponds dip ON - value 0 corresponds dip OFF
Addr
Set dip-switch 123456789
Set dip-switch
Addr
123456789
Addr
Set dip-switch 123456789
Addr
Set dip-switch 123456789
Set dip-switch
Addr
123456789
DALI 0
000000000 100000000
12 101100000 13 011100000
25 010110000 26 110110000
38 111001000 39 000101000
51 001011000 52 101011000
1 010000000
14 111100000
27 001110000
40 100101000
53 011011000
2 110000000
15 000010000
28 101110000
41 010101000
54 111011000
3 001000000
16 100010000
29 011110000
42 110101000
55 000111000
4 101000000
17 010010000
30 111110000
43 001101000
56 100111000
5 011000000
18 110010000
31 000001000
44 101101000
57 010111000
6 111000000
19 001010000
32 100001000
45 011101000
58 110111000
7 000100000
20 101010000
33 010001000
46 111101000
59 001111000
8 100100000
21 011010000
34 110001000
47 000011000
60 101111000
9 010100000
22 111010000
35 001001000
48 100011000
61 011111000
10 110100000
23 000110000
36 101001000
49 010011000
62 111111000
11 001100000
24 100110000
37 011001000
50 110011000
63 000000100
APPLICATION EXAMPLE: suppose you want to set the address 38 in the device. The following values need to be set on the switches: DIP 1 = ON, DIP 2 = ON, DIP 3 = ON, DIP 4 = OFF, DIP 5 = OFF, DIP 6 = ON, DIP 7 = OFF, DIP 8 = OFF, DIP 9 = OFF, DIP 10 = OFF.
Function
Considering the colours configuration depicted in paragraph Installation at page 3, the 4 intensities can be controlled by the following addresses:
Addr Function
+0
R
+1
G
+2
B
+3
W
Value
R 0 .. 254
G 0 .. 254
B 0 .. 254
W 0 .. 254
APPLICATION EXAMPLE: suppose you have manually set the address 38 in the device. Then, operating on DALI address: - 38 the first output intensity can be managed (red colour); - 39 the second output intensity can be managed (green colour); - 40 the third output intensity can be managed (blue colour); - 41 the fourth output intensity can be managed (white colour).
DISTRIBUTED BY +1 (865) 339 4956 7669 Clinton Highway, Wired 4 Signs USA info@w4susa.com Powell, Tennessee, 37849
DLX1224 BUS multi channel EASY
Device Manual
COMMANDS
STANDARDS COMMANDS
DIRECT ARC POWER
OFF
UP
DOWN
STEP UP
STEP DOWN
RECALL MAX LEVEL
RECALL MIN LEVEL
STEP DOWN AND OFF
ON AND STEP UP
GOTO SCENE (0 to 15)
RESET
STORE ACTUAL LEVEL IN THE DTR
STORE THE DTR AS MAX LEVEL
STORE THE DTR AS MIN LEVEL
STORE THE DTR AS SYSTEM FAILURE LEVEL
STORE THE DTR AS POWER ON LEVEL
STORE THE DTR AS FADE TIME
STORE THE DTR AS FADE RATE
STORE THE DTR AS SCENE (0 to 15)
REMOVE FROM SCENE (0 to 15)
ADD TO GROUP (0 to 15)
REMOVE FROM GROUP (0 to 15)
STORE DTR AS SHORT ADRESS
ENABLE WRITE MEMORY
QUERY STATUS
6
QUERY BALLAST
QUERY LAMP FAILURE
4
QUERY LAMP POWER ON
QUERY LIMIT ERROR
QUERY RESET STATE
QUERY MISSING SHORT ADDRESS
QUERY VERSION NUMBER
QUERY CONTENT DTR
QUERY DEVICE TYPE
7
QUERY PHYSICAL MINIMUM LEVEL
QUERY POWER FAILURE
QUERY CONTENT DTR1
QUERY CONTENT DTR2
QUERY ACTUAL LEVEL
QUERY MAX LEVEL
QUERY MIN LEVEL
QUERY SYSTEM FAILURE LEVEL
QUERY FADE TIME / FADE RATE
QUERY SCENE LEVEL (0 to 15)
QUERY GROUPS 0-7
QUERY GROUPS 8-15
QUERY ADDRESS H
QUERY ADDRESS M
QUERY ADDRESS L
READ MEMORY LOCATION
SPECIAL COMMANDS TERMINATE DATA TRANSFERT REGISTER INITIALIZE RANDOMIZE COMPARE WITHDRAW SEARCHADOR H SEARCHADOR M SEARCHADOR L PROGRAM SHORT ADDRESS VERIFY SHORT ADDRESS QUERY SHORT ADDRESS PHYSICAL SELECTION ENABLE DEVICE TYPE DATA TRANSFER REGISTER 1 DATA TRANSFER REGISTER 2 WRITE MEMORY LOCATION
Made in Italy Rev. 2021-11-10
Pag.8 / 13
6 "Lamp failure" return always "NO" 7 "Query device type" returns DT6 but "Enable device Type" is not enable
DISTRIBUTED BY +1 (865) 339 4956 7669 Clinton Highway, Wired 4 Signs USA info@w4susa.com Powell, Tennessee, 37849
DLX1224 BUS multi channel EASY
Device Manual
DEFAULT VALUES
ACTUAL LEVEL POWER ON LEVEL SYSTEM FAILURE LEVEL MIN LEVEL MAX LEVEL FADE RATE FADE TIME SHORT ADDRESS SEARCH ADDRESS RANDOM ADDRESS GROUP 0-7 GROUP 8-15 SCENE 0-15 STATUS INFORMATION VERSION NUMBER PHYSICAL MIN. LEVEL
FACTORY 254 254 254 1 254 7 0 FF FF FF FF FF FF FF 0 0 MASK 1??0???? 1 1
RESET 254 254 254 1 254 7 0 (no change) FF FF FF FF FF FF 0 0 MASK 0?100??? (no change) (no change)
Made in Italy
Rev. 2021-11-10 Pag.9 / 13
DISTRIBUTED BY +1 (865) 339 4956 7669 Clinton Highway, Wired 4 Signs USA info@w4susa.com Powell, Tennessee, 37849
DLX1224 BUS multi channel EASY
Device Manual
Made in Italy
Rev. 2021-11-10 Pag.10 / 13
BUS DMX+RDM SETUP
LEDS are managed by a DMX controller.
Use Common Reference
Primary Data Link
Secondary Data Link (Optional see clause 4.8)
3-Pin XLR Pin # 1 2 3 4 5
DMX512 Function Data Link Common Data 1Data 1+ Data 2Data 2+
FEATURES · BUS DMX512 (NSC+SIP+RDM)
DMX PROTOCOL REFERENCE STANDARDS ANSI E1.11 Entertainment Technology USITT DMX512-A Asynchronous Serial Digital Data Transmission Standard for Controlling Lighting Equipment and Accessories ANSI E1.20 Entertainment Technology-RDM-Remote Device Management over USITT DMX512 Networks
TECHNICAL SPECIFICATION Standard DMX512/RDM
CONFIGURATION
ADDRESSING
By selectors
From RDM
Function DMX512 Addressing managed by RDM
DMX512 Manual Addressing [1..511]
DIP-SWITCH
Addressing managed by RDM. All DIPS are OFF. DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6 DIP 7 DIP 8 DIP 9 DIP 10 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
Manual Addressing DIP 10 = OFF DMX address from 0 to 511 = (1*dip1 + 2*dip2 + 4*dip3 + ... + 256*dip9) See the following table to set the address. In the table: - value 1 corresponds dip ON - value 0 corresponds dip OFF
DISTRIBUTED BY +1 (865) 339 4956 7669 Clinton Highway, Wired 4 Signs USA info@w4susa.com Powell, Tennessee, 37849
CH
RDM 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
Set dip-switch 123456789
000000000 100000000 010000000 110000000 001000000 101000000 011000000 111000000 000100000 100100000 010100000 110100000 001100000 101100000 011100000 111100000 000010000 100010000 010010000 110010000 001010000 101010000 011010000 111010000 000110000 100110000 010110000 110110000 001110000 101110000 011110000 111110000 000001000 100001000 010001000 110001000 001001000 101001000 011001000 111001000 000101000 100101000 010101000 110101000 001101000 101101000
DLX1224 BUS multi channel EASY
Device Manual
Set dip-switch
CH
123456789
46 011101000 47 111101000
48 000011000 49 100011000 50 010011000
51 110011000 52 001011000
53 101011000 54 011011000 55 111011000
56 000111000 57 100111000
58 010111000 59 110111000 60 001111000 61 101111000 62 011111000 63 111111000 64 000000100 65 100000100 66 010000100 67 110000100 68 001000100 69 101000100 70 011000100 71 111000100 72 000100100 73 100100100 74 010100100 75 110100100 76 001100100 77 101100100 78 011100100 79 111100100 80 000010100 81 100010100 82 010010100 83 110010100 84 001010100 85 101010100 86 011010100 87 111010100 88 000110100 89 100110100 90 010110100 91 110110100
Set dip-switch
CH
123456789
92 001110100 93 101110100
94 011110100 95 111110100 96 000001100
97 100001100 98 010001100
99 110001100 100 001001100 101 101001100
102 011001100 103 111001100
104 000101100 105 100101100 106 010101100 107 110101100 108 001101100 109 101101100 110 011101100 111 111101100 112 000011100 113 100011100 114 010011100 115 110011100 116 001011100 117 101011100 118 011011100 119 111011100 120 000111100 121 100111100 122 010111100 123 110111100 124 001111100 125 101111100 126 011111100 127 111111100 128 000000010 129 100000010 130 010000010 131 110000010 132 001000010 133 101000010 134 011000010 135 111000010 136 000100010 137 100100010
Set dip-switch
CH
123456789
138 010100010 139 110100010
140 001100010 141 101100010 142 011100010
143 111100010 144 000010010
145 100010010 146 010010010 147 110010010
148 001010010 149 101010010
150 011010010 151 111010010 152 000110010 153 100110010 154 010110010 155 110110010 156 001110010 157 101110010 158 011110010 159 111110010 160 000001010 161 100001010 162 010001010 163 110001010 164 001001010 165 101001010 166 011001010 167 111001010 168 000101010 169 100101010 170 010101010 171 110101010 172 001101010 173 101101010 174 011101010 175 111101010 176 00001010 177 100011010 178 010011010 179 110011010 180 001011010 181 101011010 182 011011010 183 111011010
Made in Italy
Rev. 2021-11-10 Pag.11 / 13
Set dip-switch
CH
123456789
184 000111010 185 100111010
186 010111010 187 110111010 188 001111010
189 101111010 190 011111010
191 111111010 192 000000110 193 100000110
194 010000110 195 110000110
196 001000110 197 101000110 198 011000110 199 111000110 200 000100110 201 100100110 202 010100110 203 110100110 204 001100110 205 101100110 206 011100110 207 111100110 208 000010110 209 100010110 210 010010110 211 110010110 212 001010110 213 101010110 214 011010110 215 111010110 216 000110110 217 100110110 218 010110110 219 110110110 220 001110110 221 101110110 222 011110110 223 111110110 224 00000110 225 100001110 226 010001110 227 110001110 228 001001110 229 101001110
DISTRIBUTED BY +1 (865) 339 4956 7669 Clinton Highway, Wired 4 Signs USA info@w4susa.com Powell, Tennessee, 37849
Set dip-switch
CH
123456789
230 011001110 231 111001110
232 000101110
233 100101110
234 010101110
235 110101110
236 001101110
237 101101110
238 011101110
239 111101110
240 000011110
241 100011110
242 010011110
243 110011110
244 001011110
245 101011110
246 011011110
247 111011110
248 000111110
249 100111110
250 010111110
251 110111110
252 001111110
253 101111110
254 011111110
255 111111110
256 000000001
257 100000001
258 010000001
259 110000001
260 001000001
261 101000001
262 011000001
263 111000001
264 000100001
265 100100001
266 010100001
267 110100001
268 001100001
269 101100001
270 011100001
271 111100001
272 000010001
273 100010001
274 010010001
275 110010001
DLX1224 BUS multi channel EASY
Device Manual
Set dip-switch
CH
123456789
276 001010001 277 101010001
278 011010001
279 111010001
280 000110001
281 100110001
282 010110001
283 110110001
284 001110001
285 101110001
286 011110001
287 111110001
288 000001001
289 100001001
290 010001001
291 110001001
292 001001001
293 101001001
294 011001001
295 111001001
296 000101001
297 100101001
298 010101001
299 110101001
300 001101001
301 101101001
302 011101001
303 111101001
304 000011001
305 100011001
306 010011001
307 110011001
308 001011001
309 101011001
310 011011001
311 111011001
312 000111001
313 100111001
314 010111001
315 110111001
316 001111001
317 101111001
318 011111001
319 111111001
320 000000101
321 100000101
Set dip-switch
CH
123456789
322 010000101 323 110000101
324 001000101
325 101000101
326 011000101
327 111000101
328 000100101
329 100100101
330 010100101
331 110100101
332 001100101
333 101100101
334 011100101
335 111100101
336 000010101
337 100010101
338 010010101
339 110010101
340 001010101
341 101010101
342 011010101
343 111010101
344 000110101
345 100110101
346 010110101
347 110110101
348 001110101
349 101110101
350 011110101
351 111110101
352 000001101
353 100001101
354 010001101
355 110001101
356 001001101
357 101001101
358 011001101
359 111001101
360 000101101
361 100101101
362 010101101
363 110101101
364 001101101
365 101101101
366 011101101
367 111101101
Set dip-switch
CH
123456789
368 000011101 369 100011101
370 010011101
371 110011101
372 001011101
373 101011101
374 011011101
375 111011101
376 000111101
377 100111101
378 010111101
379 110111101
380 001111101
381 101111101
382 011111101
383 111111101
384 000000011
385 100000011
386 010000011
387 110000011
388 001000011
389 101000011
390 011000011
391 111000011
392 000100011
393 100100011
394 010100011
395 110100011
396 001100011
397 101100011
398 011100011
399 111100011
400 000010011
401 100010011
402 010010011
403 110010011
404 001010011
405 101010011
406 011010011
407 111010011
408 000110011
409 100110011
410 010110011
411 110110011
412 001110011
413 101110011
Made in Italy
Rev. 2021-11-10 Pag.12 / 13
Set dip-switch
CH
123456789
414 011110011 415 111110011
416 000001011
417 100001011
418 010001011
419 110001011
420 001001011
421 101001011
422 011001011
423 111001011
424 000101011
425 100101011
426 010101011
427 110101011
428 001101011
429 101101011
430 011101011
431 111101011
432 000011011
433 100011011
434 010011011
435 110011011
436 001011011
437 101011011
438 011011011
439 111011011
440 000111011
441 100111011
442 010111011
443 110111011
444 001111011
445 101111011
446 011111011
447 111111011
448 000000111
449 100000111
450 010000111
451 110000111
452 001000111
453 101000111
454 011000111
455 111000111
456 000100111
457 100100111
458 010100111
459 110100111
DISTRIBUTED BY +1 (865) 339 4956 7669 Clinton Highway, Wired 4 Signs USA info@w4susa.com Powell, Tennessee, 37849
Set dip-switch
CH
123456789
460 001100111 461 101100111
462 011100111
463 111100111
464 000010111
465 100010111
466 010010111
467 110010111
468 001010111
469 101010111
470 011010111
DLX1224 BUS multi channel EASY
Device Manual
Set dip-switch
CH
123456789
471 111010111 472 000110111
473 100110111
474 010110111
475 110110111
476 001110111
477 101110111
478 011110111
479 111110111
480 000001111
481 100001111
Set dip-switch
CH
123456789
482 010001111 483 110001111
484 001001111
485 101001111
486 011001111
487 111001111
488 000101111
489 100101111
490 010101111
491 110101111
492 001101111
Set dip-switch
CH
123456789
493 101101111 494 011101111
495 111101111
496 000011111
497 100011111
498 010011111
499 110011111
500 001011111
501 101011111
502 01101111
503 111011111
Made in Italy
Rev. 2021-11-10 Pag.13 / 13
Set dip-switch
CH
123456789
504 000111111 505 100111111
506 010111111
507 110111111
508 001111111
509 101111111
510 011111111
511 111111111
APPLICATION EXAMPLE: suppose you want to set the address 310 in the device. The following values need to be set on the switches: DIP 1 = OFF, DIP 2 = ON, DIP 3 = ON, DIP 4 = OFF, DIP 5 = ON, DIP 6 = ON, DIP 7 = OFF, DIP 8 = OFF, DIP 9 = ON, DIP 10 = OFF
FUNCTIONS
Considering the colours configuration depicted in paragraph Installation at page 3, the 4 intensities can be controlled by the following slots:
Slot Function 1
Value R
2
G
3
B
4
W
R 0 .. 255
G 0 .. 255
B 0 .. 255
W 0 .. 255
APPLICATION EXAMPLE:
suppose you have manually set the address 310 on the device by selectors. Then, operating on DMX address: - 310 (1st slot) first output intensity can be managed (red colour); - 311 (2nd slot) second output intensity can be managed (green colour); - 312 (3rd slot) third output intensity can be managed (blue colour); - 313 (4th slot) fourth output intensity can be managed (white colour).
RDM COMMANDS
REQUESTED PARAMETERS DISC_UNIQUE_BRANCH DISC_UN_MUTE SUPPORTED_PARAMETERS PARAMETERS_DESCRIPTION DEVICE_INFO SOFTWARE_VERSION_LABEL DMX_START_ADDRESS IDENTIFY_DEVICE
SUPPORTED PARAMETERS
PRODUCT_DETAIL_ID_LIST
DEVICE_MODEL_DESCRIPTION
MANUFACTURER_LABEL
DEVIDE_LABEL
BOOT_SOFTWARE_VERSION_ID
BOOT_SOFTWARE_VERSION_LABEL
DMX_PERSONALITY
DMX_PERSONALITY_DESCRIPTION
SLOT_INFO
SLOT_DESCRIPTION
DEFAULT_SLOT_VALUE
DISTRIBUTED BY +1 (865) 339 4956 7669 Clinton Highway, Wired 4 Signs USA info@w4susa.com Powell, Tennessee, 37849
Led dimmer and RGB controller for professional lighting systemsLed dimmer and RGB controller for professional lighting systems |
DLX1224 Multi-Channel CASAMBI Device Manual Technical manual for the DALC NET DLX1224 multi-channel LED dimmer controller with CASAMBI integration, detailing features, product codes, specifications, protections, and installation instructions. |
 |
DALCNET DLB1248 Series EU Declaration of Conformity - LED Drivers Official EU Declaration of Conformity for DALCNET DLB1248 series voltage-multichannel DMX/MODBUS LED drivers, detailing compliance with EMC and RoHS directives and applied harmonised standards. |
 |
DALCNET MINI-1AC-DALI Device Manual and Technical Specifications Comprehensive device manual for the DALCNET MINI-1AC-DALI, a single-channel AC trailing edge dimmer. Covers features, technical specifications, installation, DALI and pushbutton control, thermal characteristics, and app configuration via LightApp. |