ROCCAT SupportTurtle Beach Support
Turtle Beach Support
User Guide for ROCCAT models including: SynTM Max Air 16 Max Air Gaming Headset, SynTM Max Air 16, Max Air Gaming Headset, Gaming Headset, Headset
Syn™ Max Air는 16시간 이상 지속되는 충전식 배터리를 사용합니다. 정기적으로 충전해야 합니다. Syn™ Max Air는 트랜스미터를 사용해 충전합니다. 트랜스미터를 연결하고 ...
File Info : application/pdf, 13 Pages, 1.78MB
DocumentDocument QUICK START GUIDE
PACKAGE CONTAINS
1× USB-C 1 1× USB-C Charging Cable
Removable Microphone
1× USB-A to USB-C 1
1× USB-A to USB-C Charging Cable
SYN
/ Transmitter / Charging Stand
USB-A USB-A Adapter
SynTM Max Air SynTM Max Air Gaming Headset
HEADSET CONTROLS
Variable Mic Monitoring
Bluetooth® Bluetooth® Multi-Function Button
Volume Control
LED LED Indicator
USB USB Charge & Update Port
/ Power On / Off
LED LED INDICATIONS
LED
= = = = / = LED = Bluetooth® / LED = Bluetooth® LED = / /
Connection Status LED
Solid White = Headset Connected Pulsing Red = Low Battery Solid Red = Headset Charging Pulsing White = Headset On/Full Battery Double Blink White = Headset Pairing Blinking Blue LED = Bluetooth® On/Pairing Solid Blue LED = Bluetooth® Paired LED OFF = Headset Off/Charging/Full Battery
* , LED .
* When the headset is off and charging, the Solid Red LED will turn off when the battery is full.
LED
= = =
Connection Status LED
Solid White = Headset Connected Double Blink White = Headset Pairing Pulsing Red = Microphone Muted
| CHARGING
OR SYN
PC
POWER
SynTM Max Air 16 . .
SynTM Max Air .
. ( `/ ')
. SynTM Max Air .
(3 ) . 45°C .
The SynTM Max Air uses a 16+ hour rechargeable battery. Make sure to charge it regularly.
The SynTM Max Air uses the transmitter for contact charging.
Plug in your transmitter and make sure it is connected to a power source. (For initial setup, refer to "Transmitter/Charging Base Setup")
Then, set your headset in the transmitter and make sure the headset is connected to the charging pins. The SynTM Max Air can also be plugged directly into a power source for charging.
Headset Storage Always charge your headset before storing it for any extended period of time (greater than 3 months). Never store the unit in temperatures above 113°F/45°C.
USB-C | USB-C SETUP
SYN
SynTM Max Air USB-C PS5TM, Nintendo SwitchTM, Android .
1.
USB-A .
2.
2 .
3.
SynTM Max Air .
PS4TM PS5TM , .
* PC .
The SynTM Max Air also works great with other platforms with USB-C ports, including the PS5TM and Nintendo SwitchTM.
1.
Plug the Transmitter into a USB-A slot in your device
2.
Hold the Power Button on the headset for 2 seconds to turn it on
3.
In your device's settings, make sure the SynTM Max Air is selected
on your device
When connecting the transmitter to a PS5TM or PS4TM, master volume must be adjusted from the Settings Menu.
*Software capabilities are only available on PC.
BLUETOOTH® | BLUETOOTH® SETUP
ON
SynTM Max Air Bluetooth® . Bluetooth® .
1.
.
2.
Bluetooth® .
3.
Bluetooth® .
Your SynTM Max Air allows you to simultaneously connect to a Bluetooth® enabled device and the wireless transmitter. To put your headset into Bluetooth® pairing mode, follow these steps:
1.
Power your headset on
2.
Press and hold the Bluetooth® button to initiate pairing
3.
Connect your headset through your Bluetooth® devices settings
/ ( )
BLUETOOTH®
BLUETOOTH® FUNCTIONS
FUNCTION Play/Pause
Press Once
ACTION
Skip Forward
Press Twice
Fast Forward
Press Three Times
Skip Back Rewind
Press Twice Quickly and Hold Press Three Times Quickly and Hold
Answer Call
Press Once
End Call
Press Once
Reject Incoming Call
Press Twice Quickly
Activate Voice Recognition (if available)
Press and Hold
NINTENDO SWITCHTM SETUP ON THE NINTENDO SWITCHTM
SY N
1. SynTM Max Air . 2. LED Bluetooth® . 3. Nintendo Switch .
> Bluetooth® > . 4. SynTM Max Air . 5. `OK' . 6. SynTM Max Air Nintendo Switch
.
SynTM Max Air `Y' . `OK' `' .
1. Make sure your SynTM Max Air are not paired to another device. 2. Press and hold the Bluetooth® button on the headset until the
LED starts blinking rapidly. 3. In your Nintendo Switch's home menu.
Go to System Settings > Bluetooth® Audio > Pair Device 4. Select the SynTM Max Air from the menu to pair. 5. Once the pairing is successful, select "OK" on the prompt. 6. Adjust your SynTM Max Air volume from the Nintendo Switch's volume
controls on the top of the console.
If your SynTM Max Air are not shown on the list of detected devices, hit "Y" to search again. If no devices were detected, select "OK" on the prompt, then "Pair Device" again to search again.
| RAPID CHARGE DOCK
USB-C PC . PC .
The rapid charge dock is connected to your PC via USB-C cable. It can simultaneously be connected to an external power source if you would like charging functionality while your PC is powered off.
:
Choose the configuration that best suits your setup:
A) B)
USB-C PC PC .
Option A)
USB-C PC PC USB .
Option B)
Connected to PC via USB-C cable Choose this option if you do not need charging functionality while your PC is powered off.
Connected to PC via USB-C cable Choose this option if your motherboard supplies USB power while your PC is powered off.
C)
+
USB-C PC PC .
Option C)
+
Connected to both PC and external power source via USB-C cables Choose this option if you would like charging functionality while your PC is powered off, but your motherboard does not support it.
A)
PC
USB-C PC
1. USB-C PC . 2. USB-C PC USB-C .
Connected to PC via USB-C cable
1. Plug the USB-C cable into the PC slot underneath the rapid charge dock
2. Plug the other end of the USB-C cable into an available USB-C slot on your PC
B)
C)
PC
USB-C PC
1. USB-C BIOS PC . .
2. USB-C PC USB-C . 3. USB ` ' .
Connected to PC via USB-C cable
1. Plug the USB-C cable into the PC slot underneath the rapid charge dock
2. Plug the other end of the USB-C cable into an available USB-C slot on your PC
3. Change the USB power settings to "always on" in your motherboard BIOS. Refer to user manual for specific details
POWER
PC
USB-C PC
1. USB-C PC . 2. USB-C PC USB-C . 3. USB-C . 4. USB-C (
) .
Connected to both PC and external power source via USB-C cables
1. Plug the first USB-C cable into the PC slot underneath the rapid charge dock
2. Plug the other end of the first USB-C cable into an available USB-C slot on your PC
3. Plug the second USB-C cable into the power slot underneath the rapid charge dock
4. Plug the other end of the second USB-C cable into an external power source (e.g. wall charger or power brick)
MICROPHONE ATTACHMENT
SYN
1. .
2. . 3.
.
1. Remove the Microphone Cover from the left ear cup 2. Align the Removable Microphone with the microphone slot on
the left ear cup 3. Press firmly until the Removable Microphone clicks
into the microphone slot
MICROPHONE FLIP-TO-MUTE OPERATION
. .
Microphone Mute Flip up mic to mute. There is an audible tone when the mic is muted or unmuted.
SYN
SYN
SYN
Mic Unmuted
Mic Muted
Mic Muted
PC/MAC® | PC/MAC® SETUP
SYN
PC
KR
1. SynTM Max Air PC USB .* 2. 2 (
). 3. `
' . 4. ' `SynTM Max Air' . 5. .
* , USB-C USB-C .
EN
1. Plug the SynTM Max Air Transmitter in a USB slot on your PC*. 2. Hold the Power Button for 2 seconds to turn on the headset
(the transmitter and headset are automatically paired). 3. Right click the speaker icon in your toolbar and select
"Open Sound Settings". 4. Select "SynTM Max Air" from the "Choose Your Output Device"
drop-down menu. 5. Open the driver software to customize your settings.
*If desired, convert your transmitter to USB-C with the provided USB-C Adapter.
FR
1. Branchez l'émetteur du SynTM Max Air dans un port USB de votre PC*. 2. Maintenez le bouton d'alimentation appuyé pendant 2 secondes
pour allumer le casque (l'émetteur et le casque sont appairés automatiquement). 3. Faites un clic droit sur l'icône en forme de haut-parleur dans votre barre d'outils et cliquez sur "Ouvrir les paramètres de son". 4. Sélectionnez le SynTM Max Air dans le menu déroulant "Choisir votre périphérique de sortie". 5. Ouvrez le logiciel de pilotes pour personnaliser vos options.
ES
1. Enchufa el transmisor SynTM Max Air en una ranura USB de tu PC* 2. Mantén pulsado el botón de encendido durante 2 segundos
para encender los auriculares (el transmisor y los auriculares se emparejan automáticamente) 3. Haz clic con el botón derecho en el icono de altavoz de tu barra de herramientas y selecciona "Abrir configuración de sonido" 4. En el menú desplegable "Elige el dispositivo de salida", selecciona "SynTM Max Air" 5. Abre el software de controlador para personalizar la configuración.
* Si vous le souhaitez, convertissez votre émetteur en USB-C avec l'adaptateur USB-C fourni. * El transmisor se puede transformar en USB-C gracias al adaptador USB-C incluido.
DE
1. Schließe den Sender des SynTM Max Air an einen USB-Port deines PC's* an
2. Halte den Einschaltknopf an deinem Headset für 2 Sekunden gedrückt (Sender und Headset werden automatisch gekoppelt)
3. Klicke mit rechts auf das Lautsprechersymbol in deiner Symbolleiste und öffne die Soundeinstellungen
4. Wähle bei ,,Ausgabegerät auswählen" im Dropdownmenü das SynTM Max Air aus
5. Öffne die Treiber-Software, um deine Einstellungen anzupassen
* Bei Bedarf kannst du deinen Sender mit dem beigelegten Adapter auf USB-C anpassen.
IT
1. Collega il trasmettitore delle SynTM Max Air a una porta USB del tuo PC*
2. Tieni premuto il pulsante di alimentazione per 2 secondi per accendere le cuffie (il trasmettitore e le cuffie vengono associati automaticamente)
3. Fai clic con il pulsante destro del mouse sull'icona dell'altoparlante nella barra degli strumenti e seleziona ""Apri impostazioni audio""
4. Seleziona ""SynTM Max Air"" dal menu a discesa ""Scegli dispositivo di output""
5. Avvia il software dei driver per personalizzare le tue impostazioni
*Se lo desideri, puoi convertire in USB-C il tuo trasmettitore con l'adattatore USB-C fornito.
SYN
Customize your ROCCAT® product and keep it up to date with the latest software and firmware
Download now for Windows® 10 & Windows® 11 at:
WWW.ROCCAT.COM/DOWNLOADS
TECHNICAL FACTS
TECH SPECS Direct wireless connection via transmitter dock 20Hz 20kHz speaker frequency response 2.4GHz transmitter Audio controls: master volume wheel, variable mic monitoring, and mic mute and Bluetooth® Rechargeable 16h battery 50mm speakers with neodymium magnets Removable unidirectional microphone Soft leatherette on headband and outer earcups Over-ear design with memory foam
SYSTEM REQUIREMENTS Windows® 10 & Windows® 11 (software support) USB 2.0 (or higher) Internet connection
Should you need assistance ... Our support team is ready to help you with any technical questions. Just send an e-mail to support@roccat.com or visit our website at:
W W W.ROCCAT.COM/SUPPORT
REGULATORY COMPLIANCE STATEMENTS FOR THE SYN MAX AIR RX & TX
LOCAL RESTRICTIONS ON RADIO USAGE Caution: Due to the fact that the frequencies used by wireless devices may not yet be harmonized in all countries, these radio products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such.
To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer`s OEM Regulatory Guidance document at the following URL http://www.turtlebeach.com/homologation or contact Turtle Beach directly.
FEDERAL COMMUNICATIONS COMMISSION (FCC) COMPLIANCE NOTICES This section includes the following FCC statements for the Syn Max Air: · FCC IDs: XGB-14155 & XGB-15159 · Class B Interference Statement · RF Radiation Exposure & Hazard Warning · Non-Modification Statement
CLASS B INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF RADIATION EXPOSURE & HAZARD STATEMENT This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not co-located or operating in conjunction with any other antenna or transmitter.
NON-MODIFICATION STATEMENT Use only the supplied internal antenna. Unauthorized antennas, modifications, or attachments could damage the Syn Max Air RX & TX Models and violate FCC regulations. Any changes or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate this equipment. Please contact Turtle Beach for a list of approved 2.4G SRD (2400~2483.5MHz) antennas.
CANADIAN ICES STATEMENTS IC: 3879A-14155 & 3879A-15159
This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: 1. This device may not cause interference; and 2. This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1. l'appareil ne doit pas produire de brouillage; 2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.
To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing and not supported by Syn Max Air RX & TX Models. Pour éviter les interférences radio au service agréé (c.-à-d. Les systèmes par satellite mobile co-canal), cet appareil est destiné à fonctionner à l`intérieur et à l`extérieur des fenêtres pour assurer un blindage maximal. L`équipement (ou son antenne d`émission) installé à l`extérieur est soumis à l`octroi de licences et n`est pas pris en charge par les modèles Syn Max Air RX et TX.
RF RADIATION EXPOSURE & HAZARD STATEMENT The product complies with Canada portable RF exposure limits set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
EXPOSITION AUX RADIATIONS RF & MENTION DE DANGER Le produit est conforme aux limites d`exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé Le produit est sr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux exposition RF peut être augmentée si l'appareil peut être conservé aussi loin que possible du corps de l`utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible.
EUROPEAN UNION AND EUROPEAN FAIR TRADE ASSOCIATION (EFTA) REGULATORY COMPLIANCE
This equipment may be operated in the countries that comprise the member countries of the European Union and the European Fair Trade Association. These countries, listed below, are referred to as The European Community throughout this document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE,, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, SWITZERLAND
Declaration of Conformity Marking by this symbol:
indicates compliance with the Essential Requirements of the EMC Directive of the European Union (2014/30/EU). This equipment meets the following conformance standards:
Safety: EMC:
EN 62368-1:2020+A11 (T-Mark License) IEC 62368-1: 2018 (CB Scheme Certificate)
EN 55032:2015; CISPR 32:2015, EN 301489-1 V2.1.1(2017-02), EN301489-17 V3.1.1(2016-11)
To access the rating label on the left ear cup: Pour accéder à l'étiquette sur l'oreillette gauche:
Radio:
EN 300328 V2.2.2
SAR:
EN 62311:2008
Environmental: RoHS 2015/863 amending Annex II to 2011/65/EU, WEEE 2012/19/EU, REACH 2006/1907/EC, Packaging 94/62/EC, Battery 2006/66/EC,
Please visit the following URL for a complete copy of the Declaration of Conformity: http://www.turtlebeach.com/homologation
Warning: To prevent possible hearing damage, do not listen at high volume levels for long periods.
Warning! This is a Class B product. In a domestic environment, this product may cause radio interference, in which case, the user may be required to take appropriate measures.
Achtung! Dieses ist ein Gerät der Funkstörgrenzwertklasse B. In Wohnbereichen können bei Betrieb dieses Gerätes Rundfunkstörungen auftreten, in welchen Fällen der Benutzer für entsprechende Gegenmaßnahmen verantwortlich ist.
Attention! Ceci est un produit de Classe B. Dans un environnement domestique, ce produit risque de créer des interférences radioélectriques, il appartiendra alors à l'utilisateur de prendre les mesures spécifiques appropriées.
This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.
Turtle Beach Europe Ltd is obligated as a producer with a main activity of selling under The Producer Responsibility Obligations (Packaging Waste) Regulations 2007. To fulfil our obligation we are registered with Comply Direct and their Recycling Room. Here you will find advice and information on packaging waste management, recycling symbols and the waste hierarchy principles of reduce, reuse and recycle. https://www.complydirect.com/the-recycling-room/
Mexican IFT-008 Statement "La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada."
CMIIT ID: 2021DJ7762
R 005-102907 R 005-102908 R 005-102911
VOYETRA TURTLE BEACH, INC. | 44 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS NY 10601, USA
© 2022 Voyetra Turtle Beach, Inc. All rights reserved. Any product names mentioned in this manual may be trademarks or registered trademarks and are the property of their respective owners. Information contained herein is subject to change without notice. Voyetra Turtle Beach, Inc shall not be made liable for any errors that may appear in this manual. This publication or parts of it may not be reproduced without the express consent of the publisher. ROCCAT® is a Turtle Beach Brand
ID002
426-202-005-005
W W W . R O C C AT. C O M