User Guide for SOS models including: Bay Alarm Medical, Smartwatch
Action. To Place An Emergency Call On. Sleep Mode. To Go Back. How To. Press and hold the places the call. down for 5 seconds until the watch. Press and hold the. to turn ON the watch. It is HIGHLY...
1) Locate the SOS button on the left-hand side of the watch. 2) Press and hold the SOS button for 5 seconds. After 5 seconds, the watch should be making the call to the monitoring center. 3) Once connected, an operator will ask if help is needed through the watch.
Bay Alarm Medical SOS Smartwatch Quick Start Guide TABLE OF CONTENT Getting to Know Your Watch 1) SOS Smartwatch Package Items 1 2) Understanding Your SOS Smartwatch 1 3) Understanding The Watch Screens 2 Getting Started 4) Turning On The Watch 3 5) Putting On & Adjusting The Watch 3 6) Placing An Emergency Call 4 7) Charging The Watch 4 Step Counter 8) Tracking Your Steps & Adjusting Goals 5 9) Turning Off The Step Counter 5 Other Features 10) Activating/Deactivating Shake to Wake 6 12) Resetting The Watch 6 13) Changing The Watchface 7 SOS Smartwatch Package Items SOS Smartwatch Docking Cradle Charger Power Supply (For Charger) Cable (For Charger) Understanding Your SOS Smartwatch SOS Button On/Sleep Button Action To Place An Emergency Call On Sleep Mode To Go Back How To Press and hold the places the call. down for 5 seconds until the watch Press and hold the to turn ON the watch. It is HIGHLY RECOMMENDED that the watch is never turned off in case of an emergency. Press to turn off the screen. Press again to turn on screen Press & release the . Need Help? Call 1-877-522-9633 1 Understanding The Watch Screens Screen What It Is Home Screensaver Description This is the default screensaver and main screen. Cellular Connection Signal Main Menu Screen A colored circle on the Home Screen will inidcate the connection strength. Green = Strong Yellow = Moderate Red = Weak The Main Menu screen has 2 icons: (1) Yellow Phone Icon = Unavailable (2) Red Show Icon = Step Counter Settings Menu Screen The Settings Menu screen. Contains the the Info icon where you can access the User Settings and System Settings. Emergency Call Screen Steps Tracker When an emergency call is made by pressing and holding the SOS Button, the Emergency Call Screen will show, indicating how long the SOS Button needs to be held. The Step Tracker screen shows the number of steps taken. On this screen, the step records and the step settings can also be accessed. Step Tracker Settings This is the Step Tracker Settings where a daily step goal can be set up. 55% Battery Status To check the battery life swipe the screen from the top to bottom. Need Help? Call 1-877-522-9633 2 SOS Smartwatch Quick Start Guide 1) Turning On The Watch Power Button 1) On the right-hand side of the watch, press and hold the Power Button until you feel the watch vibrate or start to light on. 2) Once the watch is on, the watch will show the image above to indicate it is loading and setting up. 3) The watch screen will display the screen above indicating that it is ready to use. 2) Putting On & Adjusting the Watch Free Loop Open Metal Clasp 1) Push the Free Loop off the other strap so it is only on one strap. 2) There are two buttons on the side of the Metal Clasp. Press and hold both of them at the same time and lift up. 3) Place the watch on your wrist and close the Metal Clasp back into place. Stopper Tighten Loosen 4) To adjust the band size, lift the Metal 5) When the straps are adjusted to the 6) Snap the Metal Clasp back to the strap Clasp and detach the bottom strap desired length, place the Stopper back of the watch. from the Stopper. Pull the strap towards into the adjustment hole of the strap. the other strap to tightened or pull away to loosen the strap. Need Help? Call 1-877-522-9633 3 3) Placing An Emergency Call SOS Emergency Button 1) Locate the SOS button on the left-hand side of the watch. 2) Press and hold the SOS button for 5 seconds. After 5 seconds, the watch should be making the call to the monitoring center. 4) Charging The Watch Power Supply Back of Docking Cradle Charger 00:10 +1 855-334-2548 Volume Whisper Mode End Call (EMS will still receive the call) 3) Once connected, an operator will ask if help is needed through the watch. Respond according to your situation. If there is no response from you, the operator will send emergency personnel. Cable 1) Connect the Cable to the Power Supply. 2) Plug the other end of the Cable into the port of the back Docking Cradle Charger. Then plug the Power Supply into the outlet. 3) Place the watch onto the Docking Cradle Charger aligning the 5 prong port of the watch to that of the Docking Cradle. 55% 100% 99% 4) Check if the light on the Docking Cradle lights up red. This means the watch battery is charging. 5) Once the Docking Station light turns green, the watch is ready to use. NOTE: Tap on the watch screen to check the battery life instead of looking at the charging station light. The light may turn red after being fully charged. Need Help? Call 1-877-522-9633 4 5) Tracking Your Steps & Adjusting Step Goals 1) On the main screen, tap the screen once. It should direct you to the Main Menu screen. 2) Then press the red Step Counter button 3) The Step Counter screen should show. (red icon with the white shoe). To set a personal step goal, tap on the gear icon . 4) Tap the slide button to the right next to "Measure." Then press either the "-" or "+" to adjust to your desired goal. 5) Press the SOS button to go back to your step counter. To see your personal record, tap Record on the bottom right. 6) Turning Off the Step Counter Please note: The Step Counter may affect battery life. If you would like to have a longer battery life, then try keeping the Step Counter off. Off 1) Tap the Home screen once. It should direct you to the Main Menu screen. Then tap the Step Counter button (red icon with the white shoe). 2) Tap on the gear icon to access the Step Counter settings. 3) Tap the Toggle button to switch on (green slider) or off (grey slider). Need Help? Call 1-877-522-9633 5 8) Activating/Deactivating Shake to Wake No Name 00000000000 INFO 1) On the main screen, tap the screen once. It should direct you to the Main Menu screen. 2) Slide to the second screen to the Settings Menu screen, and tap on the Info icon. 3) Tap on the Info button at the bottom of the screen. INFORMATION User Settings Enter Code 1234 123 4 5 6 OK 7 8 9+ 0 INFORMATION Shake to Wake Locked Down 4) Scroll down to the User Settings and tap. It should be at the bottom of the list. 5) The watch will ask for a code. Enter "1234" and tap "OK." 3) Scroll to "Shake to Wake" and tap the toggle button to either activate or deactivate the feature. 7) Resetting The Watch 1) Locate the On/Sleep button on the right-hand side of the watch.Press and hold for about 15 seconds or until the screen goes dark. 2) The Bay Alarm Logo should appear soon after and return to the Home screen. Need Help? Call 1-877-522-9633 6 9) Changing The Watchface No Name 00000000000 INFO 1) On the main screen, tap the screen once. It should direct you to the Main Menu screen. 2) Slide to the second screen to the Settings Menu screen, and tap on the Info icon. 3) Tap on the Info button at the bottom of the screen. INFORMATION User Settings Enter Code 1234 123 4 5 6 OK 7 8 9+ 0 INFORMATION Watchface Shake to Wake 4) Scroll down to the User Settings and tap. It should be at the bottom of the list. 5) The watch will ask for a code. Enter "1234" and tap "OK." 6) Scroll to "Watchface" and tap it. Watchface Options: Friday 018J0U::L14205, 20pA2m1M Swipe to Change Friday JUL 2, 2021 10:45 pm 7) The screen image should minimize. Swipe left or right to look through the options. 8) When you see a screen you like, tap the center and it should be set. Go back by taping the On/Sleep button to sleep and again to reactivate. Friday JUL 2, 2021 10:45 pm 08:10 AM Need Help? Call 1-877-522-9633 7Adobe PDF library 15.00 Adobe Illustrator 24.1 (Macintosh)