MCombo Recliner with Ottoman - Owner's Manual
Welcome
Thank you for choosing MCombo. Let's get started.
Purchaser's Agreement: By accepting delivery of this product, you agree not to alter, modify, or remove safety features. You also agree to use any provided retrofit kits for safe use.
Contact Information:
- Website: www.mcombo.com
- Amazon Store: amazon.com/mcombo
- Email: sales@mcombo.com
- Phone: 1-323-597-1109 (8:00 a.m. - 4:00 p.m. PST, Monday-Friday)
- Address: Newacme LLC, 2808 Vail Ave, Commerce, CA, 90040
Safety Guidelines
1. Mandatory
Read all safety and instruction guidelines thoroughly before use. Failure to comply may result in injury or product damage and will void the warranty. Keep this manual for future reference.
2. Danger ⚠️
- Keep plastic bags away from children to prevent suffocation.
- Do not allow children to play on or near the chair while in use, as serious injury or death could occur if a child is under the chair when it is in motion.
- Keep power cords out of reach of small children and avoid using them where they pose a trip hazard.
- Plug directly into a wall outlet; do not use extension cords or adapters.
- Do not use this product if it is wet, in water, or around any liquid.
- Before moving or troubleshooting, unplug power cords and secure the mechanism to prevent unexpected movement.
- Avoid exposing the chair to burning cigarettes, open flames, or high temperatures.
- Do not operate the unit until the back is installed and locked.
- Do not attempt to disassemble or repair the actuator; it contains no serviceable parts.
- Prevent electrical cords from being pinched between moving parts or between the frame and the floor.
- Do not place cords under carpets or in locations where they could become worn.
- Always disconnect the power plug by holding the plug itself, not the cord.
- Supervise children and disabled persons closely when they use the product.
- Keep children and pets away from openings and moving parts to reduce the risk of head entrapment and other injuries.
- Regularly check power supplies, cords, plugs, and connectors for damage. Keep them away from heat sources. Never operate with damaged components.
- Unplug immediately if you detect strange odors or fumes.
- The chair is designed for a single occupant not exceeding 330 pounds. Do not operate with more than one occupant.
- Include this owner's manual if transferring ownership.
3. Warning ❗
- Weight Capacity: 330 lbs.
- INDOOR USE ONLY.
- To avoid tip-over, do not lean against the back of the chair.
- Do not stand, sit, or place extra weight on the arms, back, or open footrest.
- Do not use if damaged or with unauthorized attachments/parts.
Symbols Information
The following symbols are used on the product to identify warnings, mandatory actions, and prohibited actions. Please read and understand them.
- Symbol: "Read and follow the information in the owner's manual".
- Symbol: "Weight capacity: 330 lbs".
- Symbol: "Do not connect an extension cord to the AC/DC converter".
- Symbol: "Keep pets away from chair base".
- Symbol: "Electrical Hazard" ⚡.
- Symbol: "Indoor Use Only" ?.
Pre-Assembly Introduction
Teamwork/2-People Recommended
Always have at least two people for transporting and assembling to avoid injury or damage.
Avoid Scratches
Use cardboard or carpeted area when assembling to prevent scratches.
Level & Flat Surface
Ensure the product rests on a flat, level surface so all legs touch the floor evenly.
An Allen Wrench is included for installation. A Phillips Screwdriver is not included.
Disclaimer
Read and understand this manual before use. Mcombo is not responsible for damage or injury due to improper or unsafe use, or use that does not comply with applicable laws.
Assembly Instructions
Notice: Please read instructions thoroughly before use. Do not plug in the power supply until assembly is complete. Contact Mcombo Customer Support if any parts are missing or damaged.
1. Product Parameters
Specification | Description |
---|---|
Product Model No. | 6151-4539 |
Input | 100-240VAC 50/60Hz 0.5A |
Output | 12.0VDC 0.5A |
Package Quantity | 1 |
Carton Dimension | 33.1x25.2x18.1 inch |
Weight Capacity | 330 lbs |
Reclining Angle | 110°-140° |
Package Contains | Ottoman Cushion, Ottoman Base, Ottoman Support Rod, Back Cushion, Seat Cushion, Seat Base, Left & Right Armrest, Swivel Rod, Arm plate, Adapter, Remote Control, Screw Pack |
2. Part List
Components:
- Ottoman Cushion (D) x1
- Ottoman Base (A) x1
- Ottoman Support Rod (C) x1
- Back Cushion (E) x1
- Seat Cushion (F) x1
- Seat Base (B) x1
- Left & Right Armrest (G) x2
- Swivel Rod (H) x1
- Arm plate (I) x2
- Adapter (J) x1
- Remote Control (K) x1
Hardware:
- Screw M8*55mm (L) x2
- Screw M8*25mm (M) x12
- Screw M6*20mm (N) x2
- Allen Wrench M8 (O) x1
- Hand Wheel Knob (P) x2
- Spanner (Q) x1
- Nut M8 (R) x2
3. Assembly Steps
Step 1: Assembly of Ottoman
- Turn the Ottoman Cushion (D) over and install the Ottoman Support Rod (C) using 4 Screws (M).
- Insert the Ottoman Support Rod (C) into the Ottoman Base (A).
Step 2: Assembly of Chair Seat
- Lay the Seat Base (B) flat and insert the chair Swivel Rod (H).
- Connect the Seat Cushion (F) to the Seat Base (B) using the Swivel Rod (H).
Step 3: Combine Backrest and Armrest
- Align the holes in the armrest frames with the holes on both sides of the Back Cushion (E). Attach using 2 Screws (N) and tighten with Allen Wrench (O).
- Align the holes in the metal frame on both sides of the seat and screw in the Hand Wheel Knob (P).
Step 4: Assembly of Backrest
- Insert Screws (L) into the metal plate connecting the Seat Cushion (F) and Back Cushion (E). Tighten with Screws (L) and Nuts (R) using Allen Wrench (O) and Spanner (Q).
Step 5: Assembly of Arm plate
- Connect the two holes in the Arm Plate (I) to the Arm Frame using 2 Screws (M).
Step 6: Assembly of Armrest
- Connect Armrests (G) to the Arm Plate (I) using 2 Screws (M).
Step 7: Connect the Power Supply and Remote
Connect the Power Cord (J) (Black) to 2 black connectors. Connect the Remote Control (K) (Black) to 2 black connectors. Connect the Vibrating Cord (White) to 2 white connectors on the back cushion and seat cushion.
Step 8: Congratulations!
Assembly is complete. Relax and enjoy your new recliner.
Care and Maintenance
Your Mcombo product is designed for years of satisfaction with regular care. Follow these guidelines:
Notice:
- Avoid direct sunlight, as it causes fading.
- Do not smoke cigarettes while using the chair.
- Avoid extreme temperature changes; keep the chair away from radiators and vents.
- Do not use solvent-type cleaners for spot cleaning.
- Do not saturate fabric.
- Be careful of pet scratches on fabric or leather.
1. Fabric Care
- Regularly inspect fabric for pulls, tears, or gaps.
- Frequent vacuuming or light brushing with a non-metallic, stiff brush is recommended.
- For liquid spills, immediately wipe with a dry or lightly dampened clean cloth, sponge, or paper towel.
2. Electronics Care
- Inspect wiring harnesses for damage.
- Keep electronics free from moisture and extreme temperatures.
- Check electrical components for corrosion and replace as needed.
- Contact Mcombo Customer Support for any damage; do not attempt self-repair.
3. Faux Leather Care
- Avoid detergents, polishes, saddle soap, or abrasive brushes, as they can remove natural oils.
- Dust, vacuum, or wipe leather regularly with a clean, dry microfiber cloth.
- Avoid direct sunlight to prevent fading or discoloration.
- For spills, soak up liquids immediately with an absorbent cloth and allow to air dry. For stubborn dust, use a slightly damp cloth with distilled water. Never let water soak into leather. Professional cleaning is recommended for thorough cleaning.
4. Wood Base Care
- Keep the wood base away from fireplaces, heating/cooling vents, moisture sources (like humidifiers), and direct sunlight.
- Daily exposure to heat or sunlight can fade finishes, dry the wood, and cause cracks.
5. Metal Care
- Handle gently to avoid bumping and scratching.
- Avoid contact with hard metal objects (knives, keys).
- Do not fold too quickly to prevent damage.
- Avoid direct sunlight to prevent paint discoloration, cracking, peeling, oxidation, and deterioration.
- Avoid damp places. Clean metal furniture with a damp cloth; do not use boiling water or rinse with running water.
6. Disposal & Recycling
Dispose of the recliner according to local and national regulations. Contact your local waste disposal agency for information on packaging, frame components, fabric, and electronic components.
Troubleshooting
If you encounter issues, consult this FAQ. For further assistance, contact Mcombo Customer Support.
Questions | Answers |
---|---|
What if the massage function doesn't work? | Check electrical cords are connected correctly. Ensure cords are not crimped or pinched. Verify the remote control light is on. |
What if the swivel base makes noises when it swivels? | Apply lubricant oil to the swivel rail in the chair base to reduce friction. |
What if the chair base or ottoman base has scratches? | Scratches may occur during transit. If your base has scratches, please contact Mcombo Customer Support. |
Warranty
Notice: Mcombo can provide out-of-warranty replacement service for a fee. Warranty applies only to Mcombo products and not accessories. Valid in the 48 contiguous United States, contingent on proper operation per manual.
Component | Warranty Period |
---|---|
Reclining Mechanism | 1 Year |
Upholstery Material | 1 Year |
Metal/ Wood Chair Frame | 1 Year |
Electronic Parts | 1 Year |
Consumer Warranty Limitations and Exclusions
Warranties begin on the delivery date and are for the original purchaser only. Mcombo will replace defective parts or products if not subjected to misuse, abuse, or improper service. Exclusions include damage from contamination, abuse, accident, negligence, commercial use, or improper operation/maintenance/storage.
Note: Mcombo covers standard shipping for warranted parts for the first year. Replacement parts are available at a discount after the warranty period.
Return/Replacement Policy
Notice: Returning items yourself can incur high costs (e.g., UPS/FedEx oversize fees) and requires taking the box to a facility.
MCOMBO® Return/Replacement Policy: Mcombo offers a 30-day return/replace policy for defective or damaged products. Shipping costs for returns and replacements are covered by Mcombo via pre-paid labels or pick-up service.
Note:
- Keep original packaging for returns. If unavailable, use packaging meeting UPS/FedEx size standards: (width+height)*2+length < 128 inches.
- Disassemble the product before returning to avoid oversized shipping costs.
- Do not purchase return labels for damaged/defective products yourself.
- Contact Mcombo immediately for any return issues.
- Customers are responsible for freight costs unless the chair is defective. Refused deliveries or undeliverable items may incur a 20% restocking fee.
MCOMBO Customer Support
For questions or suggestions, please refer to the contact information below. Mcombo is committed to ensuring your satisfaction.
- Email: sales@mcombo.com (Respond within 24 hours)
- Phone: 1-323-597-1109 (8:00 a.m. - 4:00 p.m. PST, Monday-Friday)
Locations:
- DE: 2411 Bear Corbitt Rd STE 1, New Castle, DE, 19720
- TN: 3980 PREMIER AVE, MEMPHIS, TN, 38118
- CA: 2808 Vail Ave, Commerce, CA, 90040; 3400 Yosemite Ave, Lathrop, CA, 95330