User Manual for amaran models including: P60x Bi-Color LED Panel, P60x, Bi-Color LED Panel, LED Panel, LED, Panel
פנס לד Aputure Amaran P60x Bi-Color מבית ABS יבואנית מותגי צילום
File Info : application/pdf, 31 Pages, 1.52MB
DocumentDocumentamaran P60x
Product Manual
English
Foreword
Thank you for purchasing the amaran series LED photography lightamaran P60x.
The amaran P60x is a panel photography light with adjustable temperature (3200K-6500K), power of 60w, and maximum illuminance of 5070lux@1m (5600K). The P60x is also excellent in terms of light quality, with a color rendering index of up to CRI95+, TLCI 97, and no flicker at all.
The amaran P60 series is creators' best choice because of its feature of lightweight and flexibility.
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be followed, including the following:
1. Read and understand all instructions before using. 2. Close supervision is necessary when any fixture is used by or near
children. Do not leave the fixture unattended while in use. 3. Care must be taken as burns can occur from touching hot surfaces. 4. Do not operate the fixture if a cord is damaged, or if the fixture has
been dropped or damaged, until it has been examined by quali fied service personnel. 5. Position any power cables such that they will not be tripped over, pulled, or put into contact with hot surfaces. 6. If an extension cord is necessary, a cord with an amperage rating at least equal to that of the fixture should be used. Cordsrated for less amperage than the fixture may overheat. 7. Always unplug the lighting fixture from the electrical outlet before cleaning and servicing, or when not in use. Never yank the cord to remove the plug from the outlet. 8. Let the lighting fixture cool completely before storing. 9. To reduce the risk of electric shock, do not immerse this fixture in water or any other liquids. 10. To reduce the risk of re or electric shock, do not disassemble this fixture. Contact cs@aputure.com or take it to qualified service personnel when service or repair work is required. Incorrect reassembly may cause electric shock when the lighting fxture is in use.
- 1 -
11. The use of an accessory attachment not recommended by the manufacturer may increase the risk ofre, electric shock, or injury to any persons operating the fixture.
12. Power this fixture by connecting it to a grounded outlet. 13. Please do not place the LED lighting fixture near any flammable object. 14. Only use a dry microfiber cloth to clean the product. 15. Please have the product checked by an authorized service personnel
agent if your product has a problem. 16. The malfunctions caused by unauthorized disassembly are not covered
under the warranty. 17. We recommend only using the original Aputure cable accessories.
Please note that our warranty for this product does not apply to any repairs required due toany malfunctions of unauthorized Aputure accessories, although you may request such repairs for a fee. 18. This product is certified by RoHS, CE, KC, PSE, and FCC. Please operate the product in full compliance with the operation standards. Please note that this warranty does not apply to repairs arising from malfunctions, although you may request such repairs on a chargeable basis. 19. The instructions and information in this manual are based on thorough, controlled company testing procedures. Further notice will not be given if the design or specifi cations change.
SAVE THESE INSTRUCTIONS
- 2 -
FCC compliance statement
This device complies with Part 15 of the FCC rules. The operating equipment must meet the following two conditions: (1) This device will not cause harmful interference; (2) This device can withstand any external interference, including interference that may cause unintended operation. [Warning] If the user makes changes or modifications without the express permission of Aitus, he may lose the right to continue to operate the device.
[Note] This device has been tested and determined to comply with the limits of a Class B digital device (in accordance with Part 15 of the FCC rules).
These limits are designed to provide reasonable protection from harmful interference in residential installations. This device generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, under certain installation conditions, there is no guarantee that such interference will not occur. If this equipment does cause harmful interference to radio or television reception, and this can be determined by turning off and on the equipment, it is recommended that the user try one or more of the following measures to eliminate the interference:
Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on another circuit, not the outlet on the circuit to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help
FCC radiation exposure statement
This device complies with FCC radiation exposure limits for uncontrolled environments.
- 3 -
Componets List
amaran P60x AC Power cable
Adapter
Bracket light stand Softbox
Carrying case
Grid
- 4 -
Product Details
Transparent protective baffle
LED chips
Softbox support handle
1/4 screw hole
Power Button OLED Display
Menu Button
DC Input
INT Wheel
- 5 -
NP-F battery slot
LIGHTING Mode Button EFFECTS Mode Button CCT Wheel
Installation
1. The lamp fixing
Screw the 1/4'' to 3/8'' screw clockwise into the 1/4'' copper nut at the bottom (or side) of the LED lamp, and tighten it;Connect the 1/4'' to 3/8'' screw and the lamp holder through the lamp holder support column, adjust the appropriate angle and tighten it.
2. Softbox installation
The light soft box can be installed according to the needs of use.
1. Stretch soft box
2. Straighten the two support rodson both sides of the soft box to become a support rod
3. Install the soft box to the lamp body
4. The grid can be installed according to the requirements
- 6 -
Power supply
1. Adapter power supply
AC 100V-240V
Brightness CCT
Bluetooth Mode
Remaining Operating time
When disassembling the power cable, please rotate the spring lock button on the power cable before disassembling, do not pull it hard.
- 7 -
2. Lithium battery power supply
* This product uses a lithium battery model Sony NP-F Series: NP-F960/F970
Battery Installation: Slide the lithium battery into the battery slot.
Battery Removing: Press the battery lock button while gently pushing up the battery to remove the battery.
3. V-mount battery or Anton Bauer battery power supply
Through the "D-tap to DC" connection cable, the lamp body can be connected to the V-mount battery or Anton Bauer battery for power supply.
* D-tap to DC cable needs to be purchased separately.
- 8 -
Operation Instructions
1. Turning on the Light
After connecting the lamp body to an appropriate power source, press the power switch to start the P60x.
2. Manual Control
* The speed at which you rotate the knob will result in different rates of change. Rotate the Intensity (INT) Wheel to adjust the intensity of the light from 0-100%.
Rotate the CCT / HUE wheel to adjust the CCT of the light from 3200K-6500K.
- 9 -
2.1 Press the LIGHTING button to enter CCT mode to adjust the CCT and INT of the light.
2.2 Press the EFFECTS button, the default current light effect mode takes effect ( a total of four light effects: paparazzi, Strobe, fireworks, Pulsing )
Paparazzi
Strobe
Fireworks
Pulsing
2.3 Press the MENU button to enter the menu interface. MENU - 10 -
3. Menu introduction
3.1 Fan Mode
Press the MENU button to enter the menu interface, rotate the INT wheel to select and press to enter the Fan mode, rotate the INT wheel to select the smart/medium mode, and then short press the INT wheel to confirm the selection.
3.2 Studio Mode
Press the MENU button to enter the menu interface, rotate the INT wheel to select and press to enter the Studio mode interface. Rotate the INT wheel to select "Yes", and the power-on light is on.
3.3 Bluetooth Reset
Press the MENU button to enter the menu interface, rotate the INT wheel to select and press to enter the Bluetooth Reset. Rotate the wheel to select "YES" to reset the Bluetooth pairing; If you choose "NO", then it will return to the previous menu.
3.4 Fixture Serial No Press the MENU button to enter the menu interface, rotate the INT wheel to select and press to enter the Fixture Serial No.and you can see that device has a unique serial number.
- 11 -
3.5 Language Press the MENU button to enter the menu interface, rotate the INT wheel to select and press to enter the Language menu. You can rotate the INT wheel to select English or Chinese, and then press the Select wheel to confirm the selection.
3.6 Firmware Version Press the MENU button to enter the menu interface, rotate the INT wheel to select and press to enter the Firmware Version, You can check the firmware version number of the fixture.
3.7 Custom FX Press the MENU button to enter the menu interface, rotate the INT wheel to select and press to enter the Custom FX. You can choose to enter Picker FX, Music FX, or Touchbar FX interface. Each type can save 10 custom FXs. In the name of each FX, "NO FX" means unsaved FX, and "Untitled" means saved FX.
3.8 Exit Press the MENU button to enter the menu interface, rotate the INT wheel to select and press to enter the Exit.You can return to the initial interface of CCT mode.
- 12 -
4. Use of Sidus Link APP
You can download the Sidus Link app from the iOS App Store or Google Play Store for enhancing the functionality of the light. Please visit sidus.link /app/help for more details regarding how to use the app to control your Aputure lights.
Specifications
CCT CRI TLCI CQS SSI (D56) SSI (D32) Beam angle Power Output Power Input Operating Current Operating Voltage NP-F Battery Operating Voltage V/Anton Bauer Mount Battery Operating Voltage Operating temperature Control Methods Wireless Operating Range (Bluetooth) Screen Type Cooling Method Head Cable Power cable Lamp Head Size Lamp Head Weight
3200K~6500K 95 97 95 71 85 45° 60W 90W 6A 100V-240V 50Hz/60Hz 6.5v-8.4v 12.5V-16.8V
-20°C ~ 45°C / -4°F ~ 113°F ManualSidus Link APP 80m / 262.5ft
OLED Active Cooling 2-Pin DC Head Cable Locking Power cablec1.5m 25.10*17.40*3.95cm 979g
- 13 -
Photometrics
CCT
Distance
0.5m
1m
2m
Lux
3200K Fc
17570 1632
4860 452
1280 119
Lux 4300K
Fc
17670 1642
4940 459
1283 119
Lux 5600K
Fc
18120 1683
5070 471
1328 123
Lux 6500K
Fc
18410 1710
5180 481
1354 126
* This is an averaged result. The luminance of your individual unit may vary slightly from this data
Trademark statement
Sony is a trademark and product model of Sony Corporation in China or other countries.
- 14 -
Serial No. Item Name Purchase Date Buyer Name Buyer Phone Buyer Add Franchiser Seal
Aputure Imaging Industries Co., Ltd. warrants the original consumer purchaser from defects in material and workmanship for a period of one (1) year after the date of purchase. For more details of warranty visit www.aputure.com
Aputure Imaging Industries Co.,Ltd.
Inspection: Qualified
AddF/3, Building 21, Longjun Industrial Estate, Heping West Road, Shenzhen, Guangdong
Aputure Imaging Industries Co., Ltd.
Add: F/3, Building 21, Longjun industrial estate, HePing West Road, Shenzhen, Guangdong
E-MAIL: cs@aputure.com Sales Contact: (86)0755-83285569-613
amaran P60x
""LED--amaran P60x
P60x(3200K-6500K),60w 5070lux@1m5600KP60x CRI95+TLCI 97
P60
1. 2.
3. 4.
5.
6.
7.
8.
9. 10.
11. 12. 13. 14. 15.
- 17 -
16.
17.
18. RoHS, CE, KC, PSEFCC
19.
FCC
FCC 15 (1) (2)
B FCC 15 /
FCC
FCC
- 18 -
amaran P60x AC
- 19 -
LED
1/4
OLED
DC
- 20 -
NP-F
1. 1/4" 3/8"LED1/4" 1/4" 3/8"
2.
1.
2.
3.
4. - 21 -
1.
AC 100V-240V
- 22 -
2. * Sony NP-F Series: NP-F960/F970
P60x
3. V "D-tapDC"V * D-tap to DC
- 23 -
1. P60x
2. * INT 0-100%
CCT/ HUE 3200K-6500K
2.1 LIGHTINGCCT
- 24 -
2.2 `EFFECTS'
2.3 MENU. MENU
- 25 -
3.
3.1 MENU INT INT / INT
3.2 MENU INT ""
3.3 MENU INT INT""INT ""
3.4 MENU INT
- 26 -
3.5 MENU INT INT EnglishINT
3.6 MENU INT
3.7 MENU INT 10 `NO FX' Untitled
3.8 MENUINTCCT
4. Sidus Link APP App storesidus link :sidus.link/app/help
- 27 -
CCT CRI TLCI CQS SSI (D56) SSI (D32) NP-F V/ ()
3200K~6500K 95 97 95 71 85 45° 60W 90W 6A 100V-240V 50Hz/60Hz 6.5v-8.4v 12.5V-16.8V -20°C ~ 45°C / -4°F ~ 113°F Sidus Link APP 80m / 262.5ft OLED 2DC 1.5m 25.10*17.40*3.95cm 979g
- 28 -
CCT
0.5m
1m
Lux 3200K
Fc
17570 1632
4860 452
Lux 4300K
Fc
17670 1642
4940 459
Lux 5600K
Fc
18120 1683
5070 471
Lux 6500K
Fc
18410 1710
5180 481
*
2m 1280 119 1283 119 1328 123 1354 126
Sony
- 29 -
()
www.aputure.com
30
213 cs@aputure.com 0755-83285569-613 400-0999-028
Adobe PDF library 10.01 Adobe Illustrator CS6 (Windows)